Cobalt Qube 2の起動メッセージ

Cobalt Qube 2 にNetBSD/cobalt 10.0_RC4 をインストールした後の起動の様子。 NetBSD/cobalt インストール時のこつ:

起動メッセージ

Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................16M
 6.Bank 1:.................................16M
 7.Bank 2:.................................16M
 8.Bank 3:.................................16M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER ramcode: selected partition /dev/hda1
Decompressing  done
Executing bootloader kernel...
Decompressing -\ done.

>> NetBSD/cobalt 10.0_RC4 Bootloader, Revision 1.0 (Tue Feb  6 12:38:53 UTC 2024) [@0x80f00000]
>> Model:		Cobalt Qube 2
>> Memory:		65536 k
>> PROM boot string:	root=/dev/hda1 ro
Boot [wd0a:netbsd]:
Loading: wd0a:netbsd
5582352+112208 [267120+263399]=0x5f0204
Starting at 0x80001000

[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[   1.0000000]     2024
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 10.0_RC4 (GENERIC) #0: Tue Feb  6 12:38:53 UTC 2024
[   1.0000000] 	mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/cobalt/compile/GENERIC
[   1.0000000] Cobalt Qube 2
[   1.0000000] total memory = 65536 KB
[   1.0000000] avail memory = 58584 KB
[   1.0000000] mainbus0 (root)
[   1.0000000] com0 at mainbus0 addr 0x1c800000 level 3: st16650a, 32-byte FIFO
[   1.0000000] com0: console
[   1.0000000] cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0
[   1.0000000] cpu0: 48 TLB entries, 16MB max page size
[   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
[   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
[   1.0000000] mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock
[   1.0000000] lcdpanel0 at mainbus0 addr 0x1f000000
[   1.0000000] gt0 at mainbus0 addr 0x14000000
[   1.0000000] pci0 at gt0
[   1.0000000] pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1
[   1.0000000] tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
[   1.0000000] tlp0: interrupting at level 1
[   1.0000000] tlp0: Ethernet address 00:10:e0:01:06:27
[   1.0000000] lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
[   1.0000000] lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000000] pcib0 at pci0 dev 9 function 0
[   1.0000000] pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
[   1.0000000] viaide0 at pci0 dev 9 function 1
[   1.0000000] viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
[   1.0000000] viaide0: primary channel interrupting at irq 14
[   1.0000000] atabus0 at viaide0 channel 0
[   1.0000000] viaide0: secondary channel interrupting at irq 15
[   1.0000000] atabus1 at viaide0 channel 1
[   1.0000000] VIA Technologies VT83C572 USB Controller (USB serial bus, UHCI, revision 0x02) at pci0 dev 9 function 2 not configured
[   1.0000000] tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
[   1.0000000] tlp1: interrupting at level 2
[   1.0000000] tlp1: Ethernet address 00:10:e0:01:05:ca
[   1.0000000] lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
[   1.0000000] lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0198831] WARNING: system needs entropy for security; see entropy(7)
[   4.0998499] wd0 at atabus0 drive 0
[   4.1107048] wd0: <ST38410A>
[   4.1107048] wd0: 8223 MB, 16708 cyl, 16 head, 63 sec, 512 bytes/sect x 16841664 sectors
[   4.1299165] swwdog0: software watchdog initialized
[   4.2398779] boot device: wd0
[   4.2398779] root on wd0a dumps on wd0b
[   4.2798865] root file system type: ffs
[   4.2909544] kern.module.path=/stand/cobalt/10.0/modules
[   5.4399135] entropy: best effort
Sun Feb 11 17:26:21 JST 2024
Starting root file system check:
/dev/rwd0a: file system is clean; not checking
Setting sysctl variables:
ddb.onpanic: 1 -> 0
swapctl: setting dump device to /dev/wd0b
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
[  11.0898522] entropy: ready
Loaded entropy from /var/db/entropy-file.
Waiting for entropy...done
Setting tty flags.
Starting network.
Hostname: qube2.itm1.okqubit.net
IPv6 mode: host
Configuring network interfaces: tlp0.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Starting mdnsd.
Building databases: dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Mounting all file systems...
Clearing temporary files.
Updating fontconfig cache: done.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/wd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
Starting postfix.
postfix/postlog: starting the Postfix mail system
Starting inetd.
Starting cron.
Sun Feb 11 17:28:03 JST 2024

NetBSD/cobalt (qube2.itm1.okqubit.net) (tty00)

login: Feb 11 17:28:03 qube2 getty[1533]: /dev/ttyZ0: Device not configured