Digital AlphaPC 164の起動メッセージ

Digital AlphaPC 164の起動メッセージ類。

show config

>>>show config
                        Digital AlphaPC 164 500 MHz

SRM Console:    V5.5-1
PALcode:        OpenVMS PALcode V1.21-9, Digital UNIX PALcode V1.23-8

SROM Revision: 2.2
Alpha 21164A-2
DECchip (tm) 21172 CIA ASIC Pass 3

MEMORY
512 Meg of system memory


PCI Bus
     Bus 00  Slot 05: Digital S3 TRIO 64 Graphics Controller
     Bus 00  Slot 06: NCR 53C875 Scsi Controller
                                   pka0.7.0.6.0          SCSI Bus ID 7
                                   dka0.0.0.6.0           IBM DMVS
                                   dka600.6.0.6.0         TEAC CD-ROM CD-532S
                                   mka400.4.0.6.0         HP C1533A
     Bus 00  Slot 07: DECchip 21140 Network Controller
     Bus 00  Slot 08: Intel 82378IB PCI to ISA Bridge
     Bus 00  Slot 11: CMD PCI0646 IDE Controller
                                   dqa.0.0.11.0


ISA
Slot    Device  Name            Type         Enabled  BaseAddr  IRQ     DMA
0
        0       MOUSE           Embedded        Yes     60      12
        1       KBD             Embedded        Yes     60      1
        2       COM1            Embedded        Yes     3f8     4
        3       COM2            Embedded        Yes     2f8     3
        4       LPT1            Embedded        Yes     3bc     7
        5       FLOPPY          Embedded        Yes     3f0     6       2

>>>

NetBSD 10.0 dmesg

[     1.000000] consinit: not using prom console
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[     1.000000]     2024
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
[     1.000000] 	mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/alpha/compile/GENERIC
[     1.000000] Digital AlphaPC 164 500 MHz, s/n 
[     1.000000] 8192 byte page size, 1 processor.
[     1.000000] total memory = 512 MB
[     1.000000] (2472 KB reserved for PROM, 509 MB used by NetBSD)
[     1.000000] avail memory = 488 MB
[     1.000000] timecounter: Timecounters tick every 0.976 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] mainbus0 (root)
[     1.000000] cpu0 at mainbus0: ID 0 (primary), 21164A-2 (EV56)
[     1.000000] cpu0: Architecture extensions: 0x1<BWX>
[     1.000000] cia0 at mainbus0: DECchip 2117x Core Logic Chipset (ALCOR/ALCOR2), pass 3
[     1.000000] cia0: extended capabilities: 0x21<DWEN,BWEN>
[     1.000000] cia0: using BWX for PCI config access
[     1.000000] pci0 at cia0 bus 0
[     1.000000] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.000000] vga0 at pci0 dev 5 function 0: S3 Trio32/64 (rev. 0x44)
[     1.000000] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
[     1.000000] wsmux1: connecting to wsdisplay0
[     1.000000] drm at vga0 not configured
[     1.000000] esiop0 at pci0 dev 6 function 0: Symbios Logic 53c875 (ultra-wide scsi)
[     1.000000] esiop0: using on-board RAM
[     1.000000] esiop0: interrupting at eb164 irq 0
[     1.000000] scsibus0 at esiop0: 16 targets, 8 luns per target
[     1.000000] tlp0 at pci0 dev 7 function 0: DECchip 21140A Ethernet, pass 2.0
[     1.000000] tlp0: interrupting at eb164 irq 1
[     1.000000] tlp0: DEC DE500-AA, Ethernet address 00:00:f8:03:c3:b0
[     1.000000] nsphy0 at tlp0 phy 5: DP83840 10/100 media interface, rev. 0
[     1.000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[     1.000000] sio0 at pci0 dev 8 function 0: Intel 82378ZB System I/O (rev. 0x03)
[     1.000000] eap0 at pci0 dev 9 function 0: Ensoniq AudioPCI 97 (rev. 0x02)
[     1.000000] eap0: interrupting at eb164 irq 3
[     1.000000] eap0: ac97: TriTech TR28023 codec; no 3D stereo
[     1.000000] audio0 at eap0: playback, capture, full duplex, independent
[     1.000000] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[     1.000000] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[     1.000000] spkr0 at audio0: PC Speaker (synthesized)
[     1.000000] wsbell at spkr0 not configured
[     1.000000] midi0 at eap0: AudioPCI MIDI UART
[     1.000000] cmdide0 at pci0 dev 11 function 0: CMD Technology PCI0646 (rev. 0x01)
[     1.000000] cmdide0: bus-master DMA support present
[     1.000000] cmdide0: primary channel wired to compatibility mode, channel non-independent
[     1.000000] cmdide0: primary channel interrupting at isa irq 14
[     1.000000] atabus0 at cmdide0 channel 0
[     1.000000] cmdide0: secondary channel wired to compatibility mode, channel non-independent
[     1.000000] cmdide0: secondary channel interrupting at isa irq 15
[     1.000000] atabus1 at cmdide0 channel 1
[     1.000000] isa0 at sio0
[     1.000000] lpt0 at isa0 port 0x3bc-0x3bf irq 7
[     1.000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
[     1.000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
[     1.000000] pckbc0 at isa0 port 0x60-0x64
[     1.000000] pckbd0 at pckbc0 (kbd slot)
[     1.000000] pckbc0: using irq 1 for kbd slot
[     1.000000] wskbd0 at pckbd0: console keyboard, using wsdisplay0
[     1.000000] pms0 at pckbc0 (aux slot)
[     1.000000] pckbc0: using irq 12 for aux slot
[     1.000000] wsmouse0 at pms0 mux 0
[     1.000000] attimer0 at isa0 port 0x40-0x43
[     1.000000] pcppi0 at isa0 port 0x61
[     1.000000] spkr1 at pcppi0: PC Speaker
[     1.000000] wsbell at spkr1 not configured
[     1.000000] midi1 at pcppi0: PC speaker
[     1.000000] isabeep0 at pcppi0
[     1.000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[     1.000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
[     1.000000] attimer0: attached to pcppi0
[     1.000000] timecounter: Timecounter "PCC" frequency 500001120 Hz quality 1000
[     1.000003] timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0
[     1.001112] scsibus0: waiting 2 seconds for devices to settle...
[     1.262813] WARNING: system needs entropy for security; see entropy(7)
[     1.713003] entropy: best effort
[     3.011856] sd0 at scsibus0 target 0 lun 0: <IBM, DMVS18V, 0100> disk fixed
[     3.015755] sd0: 17501 MB, 11736 cyl, 10 head, 305 sec, 512 bytes/sect x 35843670 sectors
[     3.016738] sd0: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing
[     3.508918] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
[     3.910291] st0 at scsibus0 target 4 lun 0: <HP, C1533A, A612> tape removable
[     3.910291] st0: drive empty
[     3.933730] st0: sync (100.00ns offset 16), 8-bit (10.000MB/s) transfers
[     4.232567] cd0 at scsibus0 target 6 lun 0: <TEAC, CD-ROM CD-532S, 1.0A> cdrom removable
[     4.233543] cd0: sync (50.00ns offset 16), 8-bit (20.000MB/s) transfers
[     6.589037] swwdog0: software watchdog initialized
[     6.596844] sd0: 1622 trailing sectors not covered by disklabel
[     6.598802] sd0: 1622 trailing sectors not covered by disklabel
[     6.600754] sd0: 1622 trailing sectors not covered by disklabel
[     6.601732] root on sd0a dumps on sd0b
[     6.602708] sd0: 1622 trailing sectors not covered by disklabel
[     6.603685] sd0: 1622 trailing sectors not covered by disklabel
[     6.613447] root file system type: ffs
[     6.619307] kern.module.path=/stand/alpha/10.0/modules
[    35.971205] entropy: ready

lspci -vvvnn

00:05.0 VGA compatible controller [0300]: S3 Graphics Ltd. 86c764/765 [Trio32/64/64V+] [5333:8811] (rev 44) (prog-if 00 [VGA controller])
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 2
	Region 0: Memory at 84000000 (32-bit, non-prefetchable)
	Expansion ROM at 82050000 [disabled]

00:06.0 SCSI storage controller [0100]: Broadcom / LSI 53c875 [1000:000f] (rev 03)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 255 (4250ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 0
	Region 0: I/O ports at 10000
	Region 1: Memory at 82061000 (32-bit, non-prefetchable)
	Region 2: Memory at 82060000 (32-bit, non-prefetchable)
	Expansion ROM at 82040000 [disabled]

00:07.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21140 [FasterNet] [1011:0009] (rev 20)
	Subsystem: Digital Equipment Corporation Device [1011:500a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 255 (5000ns min, 10000ns max)
	Interrupt: pin A routed to IRQ 1
	Region 0: I/O ports at 10100
	Region 1: Memory at 82061100 (32-bit, non-prefetchable)
	Expansion ROM at 82000000 [disabled]

00:08.0 Non-VGA unclassified device [0000]: Intel Corporation 82378ZB/IB, 82379AB (SIO, SIO.A) PCI to ISA Bridge [8086:0484] (rev 03)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:09.0 Multimedia audio controller [0401]: Ensoniq ES1371/ES1373 / Creative Labs CT2518 [1274:1371] (rev 02)
	Subsystem: Ensoniq Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI] [1274:1371]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 248 (3000ns min, 32000ns max)
	Interrupt: pin A routed to IRQ 3
	Region 0: I/O ports at 10180
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 IDE interface [0101]: Silicon Image, Inc. PCI0646 [1095:0646] (rev 01) (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 248 (500ns min, 1000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 4: I/O ports at 101c0

X.orgが起動しないスタックトレース

NetBSD 10.0 でX.orgが起動しない。

Program terminated with signal SIGABRT, Aborted.
#0  0x000003fffd5efae4 in _lwp_kill () from /usr/lib/libc.so.12
(gdb) bt
#0  0x000003fffd5efae4 in _lwp_kill () from /usr/lib/libc.so.12
#1  0x000003fffd5ef9b8 in raise () from /usr/lib/libc.so.12
#2  0x000003fffd5f0574 in abort () from /usr/lib/libc.so.12
#3  0x00000001202138e8 in OsAbort ()
#4  0x0000000120093cdc in ddxGiveUp ()
#5  0x000000012020f05c in AbortServer ()
#6  0x000000012020f580 in FatalError ()
#7  0x000000012021480c in OsSigHandler ()
#8  <signal handler called>
#9  0x000003fffccc1d90 in stdReadMiscOut () from /usr/X11R7/lib/modules/libvgahw.so
#10 0x000003fffccc6d10 in vgaHWGetIOBase () from /usr/X11R7/lib/modules/libvgahw.so
#11 0x000003fffcd288a0 in S3PreInit () from /usr/X11R7/lib/modules/drivers/s3_drv.so
#12 0x0000000120093008 in InitOutput ()
#13 0x00000001202a3e48 in main ()