Boot log for PerfXLab RVBoards-Nezha. Back to article
[204]HELLO! BOOT0 is starting!
[207]BOOT0 commit : 27369ab
[209]set pll start
[211]periph0 has been enabled
[214]set pll end
[216][pmu]: bus read error
[218]board init ok
[220]DRAM only have internal ZQ!!
[223]get_pmu_exist() = -1
[226]ddr_efuse_type: 0x0
[229][AUTO DEBUG] two rank and full DQ!
[233]ddr_efuse_type: 0x0
[236][AUTO DEBUG] rank 0 row = 15
[239][AUTO DEBUG] rank 0 bank = 8
[242][AUTO DEBUG] rank 0 page size = 2 KB
[246][AUTO DEBUG] rank 1 row = 15
[249][AUTO DEBUG] rank 1 bank = 8
[252][AUTO DEBUG] rank 1 page size = 2 KB
[256]rank1 config same as rank0
[259]DRAM BOOT DRIVE INFO: V0.24
[262]DRAM CLK = 792 MHz
[264]DRAM Type = 3 (2:DDR2,3:DDR3)
[268]DRAMC ZQ value: 0x7b7bfb
[270]DRAM ODT value: 0x42.
[273]ddr_efuse_type: 0x0
[276]DRAM SIZE =1024 M
[280]DRAM simple test OK.
[282]dram size =1024
[284]card no is 0
[285]sdcard 0 line count 4
[288][mmc]: mmc driver ver 2021-04-2 16:45
[297][mmc]: Wrong media type 0x0
[300][mmc]: ***Try SD card 0***
[321][mmc]: HSSDR52/SDR25 4 bit
[324][mmc]: 50000000 Hz
[326][mmc]: 30436 MB
[328][mmc]: ***SD/MMC 0 init OK!!!***
[376]Loading boot-pkg Succeed(index=0).
[380]Entry_name = opensbi
[383]Entry_name = u-boot
[386]Entry_name = dtb
[389]mmc not para
[391]Jump to second Boot.
OpenSBI v0.6
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : T-HEAD Xuantie Platform
Platform HART Features : RV64ACDFIMSUVX
Platform Max HARTs : 1
Current Hart : 0
Firmware Base : 0x40000400
Firmware Size : 75 KB
Runtime SBI Version : 0.2
MIDELEG : 0x0000000000000222
MEDELEG : 0x000000000000b1ff
PMP0 : 0x0000000040000000-0x000000004001ffff (A)
PMP1 : 0x0000000040000000-0x000000007fffffff (A,R,W,X)
PMP2 : 0x0000000000000000-0x0000000007ffffff (A,R,W)
PMP3 : 0x0000000009000000-0x000000000901ffff (˙
U-Boot 2018.05-g0a88ac9 (Apr 30 2021 - 11:23:28 +0000) Allwinner Technology
[00.473]DRAM: 1 GiB
[00.475]Relocation Offset is: 3def0000
[00.479]secure enable bit: 0
[00.482]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz
[00.488]flash init start
[00.490]workmode = 0,storage type = 1
[00.494][mmc]: mmc driver ver uboot2018:2021-04-16 14:23:00-1
[00.499][mmc]: get sdc_type fail and use default host:tm1.
[00.506][mmc]: can't find node "mmc0",will add new node
[00.510][mmc]: fdt err returned <no error>
[00.514][mmc]: Using default timing para
[00.518][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.546][mmc]: card_caps:0x3000000a
[00.549][mmc]: host_caps:0x3000003f
[00.555]sunxi flash init ok
[00.557]line:714 init_clocks
__clk_init: clk pll_periph0x2 already initialized
register fix_factor clk error
[00.567]drv_disp_init
request pwm success, pwm2:pwm2:0x2000c00.
[00.584]drv_disp_init finish
[00.586]boot_gui_init:start
[00.589]set disp.dev2_output_type fail. using defval=0
[00.781]boot_gui_init:finish
partno erro : can't find partition bootloader
54 bytes read in 1 ms (52.7 KiB/s)
[01.144]bmp_name=bootlogo.bmp size 38454
38454 bytes read in 3 ms (12.2 MiB/s)
[01.168]Loading Environment from SUNXI_FLASH... OK
[01.187][mmc]: memalign dst_align is NULL!
read first backup f[01.193]LCD open finish
ailed in fun sunxi_flash_mmc_secread line 353
[01.199][mmc]: memalign dst_align is NULL!
read first backup failed in fun sunxi_flash_mmc_secread line 353
[01.209]unknown error happen in item 0 read
[01.213]get secure storage map err
[01.216]sunxi secure storage is not supported
[01.220]usb burn from boot
delay time 0
weak:otg_phy_config
[01.231]usb prepare ok
[02.034]overtime
[02.038]do_burn_from_boot usb : no usb exist
root_partition is rootfs
set root to /dev/mmcblk0p5
[02.047]update part info
[02.050]update bootcmd
[02.053]change working_fdt 0x7eaafda8 to 0x7ea8fda8
[02.074]update dts
Hit any key to stop autoboot: 0
dsp0:gpio init config fail
DSP0 start ok, img length 263580, booting from 0x400660
Android's image name: d1-nezha
No reserved memory region found in source FDT
[02.530]
Starting kernel ...
[02.533][mmc]: MMC Device 2 not found
[02.536][mmc]: mmc 2 not find, so not exit
[ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[ 0.000000] Linux version 5.4.61 (xsr2@395857fe441c) (riscv64-unknown-linux-gnu-gcc (C-SKY RISCV Tools V1.8.3 B20200528) 8.1.0, GNU ld (GNU Binutils) 2.32) #3 PREEMPT Mon May 24 01:59:34 UTC 2021
[ 0.000000] cma: Reserved 8 MiB at 0x000000007f800000
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000040200000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 261632
[ 0.000000] DMA32 zone: 3577 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 261632 pages, LIFO batch:63
[ 0.000000] elf_hwcap is 0x20112d
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258055
[ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p5 init=/sbin/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmcblk0p6:recovery@mmcblk0p7:UDISK@mmcblk0p8 cma=8M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.hardware=sun20iw1p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05-g0a88ac9(04/30/2021-11:23:28) mbr_offset=1556480 disp_reserve=40960
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1007788K/1046528K available (6136K kernel code, 661K rwdata, 2110K rodata, 200K init, 254K bss, 30548K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[ 0.000000] plic: mapped 200 interrupts with 1 handlers for 2 contexts.
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000020] riscv_timer_clockevent depends on broadcast, but no broadcast function available
[ 0.000315] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000912] Console: colour dummy device 80x25
[ 0.000953] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000969] pid_max: default: 32768 minimum: 301
[ 0.001153] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.001177] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.002996] ASID allocator initialised with 65536 entries
[ 0.003168] rcu: Hierarchical SRCU implementation.
[ 0.003868] devtmpfs: initialized
[ 0.016407] random: get_random_u32 called from bucket_table_alloc.isra.31+0x4e/0x15e with crng_init=0
[ 0.017514] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017544] futex hash table entries: 256 (order: 0, 6144 bytes, linear)
[ 0.017975] pinctrl core: initialized pinctrl subsystem
[ 0.019328] NET: Registered protocol family 16
[ 0.021189] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.021790] cpuidle: using governor menu
[ 0.066633] rtc_ccu: sunxi ccu init OK
[ 0.073087] clock: sunxi ccu init OK
[ 0.074007] clock: sunxi ccu init OK
[ 0.112951] iommu: Default domain type: Translated
[ 0.113116] sunxi iommu: irq = 4
[ 0.114227] SCSI subsystem initialized
[ 0.114555] usbcore: registered new interface driver usbfs
[ 0.114634] usbcore: registered new interface driver hub
[ 0.114747] usbcore: registered new device driver usb
[ 0.114922] mc: Linux media interface: v0.10
[ 0.114980] videodev: Linux video capture interface: v2.00
[ 0.116086] sunxi-msgbox-amp 3003000.msgbox: invalid resource
[ 0.116761] Advanced Linux Sound Architecture Driver Initialized.
[ 0.117368] Bluetooth: Core ver 2.22
[ 0.117447] NET: Registered protocol family 31
[ 0.117456] Bluetooth: HCI device and connection manager initialized
[ 0.117477] Bluetooth: HCI socket layer initialized
[ 0.117494] Bluetooth: L2CAP socket layer initialized
[ 0.117529] Bluetooth: SCO socket layer initialized
[ 0.117802] pwm module init!
[ 0.119320] g2d 5410000.g2d: Adding to iommu group 0
[ 0.119794] G2D: rcq version initialized.major:250
[ 0.120499] input: sunxi-keyboard as /devices/virtual/input/input0
[ 0.121897] clocksource: Switched to clocksource riscv_clocksource
[ 0.135245] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[ 0.151055] NET: Registered protocol family 2
[ 0.151846] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.151993] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.152105] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.152188] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.152369] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.152425] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.152685] NET: Registered protocol family 1
[ 0.153901] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator
[ 0.154483] spi spi1: spi1 supply spi not found, using dummy regulator
[ 0.154733] sunxi_spi_resource_get()2062 - [spi1] SPI MASTER MODE
[ 0.154833] sunxi_spi_clk_init()2138 - [spi1] mclk 100000000
[ 0.155552] sunxi_spi_probe()2542 - [spi1]: driver probe succeed, base ffffffd004060000, irq 32
[ 0.157399] Initialise system trusted keyrings
[ 0.157652] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[ 0.165901] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.187206] Key type asymmetric registered
[ 0.187221] Asymmetric key parser 'x509' registered
[ 0.187245] io scheduler mq-deadline registered
[ 0.187253] io scheduler kyber registered
[ 0.187272] atomic64_test: passed
[ 0.188479] [DISP]disp_module_init
[ 0.189054] disp 5000000.disp: Adding to iommu group 0
[ 0.189653] [DISP] disp_init,line:2385:
[ 0.189658] smooth display screen:0 type:1 mode:4
[ 0.224950] display_fb_request,fb_id:0
[ 0.251002] disp_al_manager_apply ouput_type:1
[ 0.251159] [DISP] lcd_clk_config,line:731:
[ 0.251171] disp 0, clk: pll(420000000),clk(420000000),dclk(70000000) dsi_rate(70000000)
[ 0.251171] clk real:pll(420000000),clk(420000000),dclk(105000000) dsi_rate(150000000)
[ 0.251978] [DISP]disp_module_init finish
[ 0.252875] sunxi_sid_init()506 - insmod ok
[ 0.253432] pwm-regulator: supplied by regulator-dummy
[ 0.260778] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator
[ 0.261188] uart uart0: get regulator failed
[ 0.261217] uart uart0: uart0 supply uart not found, using dummy regulator
[ 0.261594] uart0: ttyS0 at MMIO 0x2500000 (irq = 18, base_baud = 1500000) is a SUNXI
[ 0.261620] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
[ 1.043888] printk: console [ttyS0] enabled
[ 1.049416] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator
[ 1.060872] uart uart1: get regulator failed
[ 1.065694] uart uart1: uart1 supply uart not found, using dummy regulator
[ 1.073765] uart1: ttyS1 at MMIO 0x2500400 (irq = 19, base_baud = 1500000) is a SUNXI
[ 1.083619] misc dump reg init
[ 1.087868] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[ 1.095112] sunxi-rfkill soc@3000000:rfkill@0: devm_pinctrl_get() failed!
[ 1.102766] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[ 1.110057] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[ 1.117503] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[ 1.124042] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[ 1.130951] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1)
[ 1.138710] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[ 1.146572] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[ 1.154743] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[ 1.162386] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[ 1.169136] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1)
[ 1.176683] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=210 assert=0
[ 1.184985] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9
[ 1.192509] [ADDR_MGT] addr_mgt_probe: success.
[ 1.198913] libphy: Fixed MDIO Bus: probed
[ 1.203572] CAN device driver interface
[ 1.208913] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[ 1.220256] sunxi gmac driver's version: 1.0.0
[ 1.225430] gmac-power0: NULL
[ 1.228741] gmac-power1: NULL
[ 1.232128] gmac-power2: NULL
[ 1.236733] Failed to alloc md5
[ 1.240245] eth0: Use random mac address
[ 1.245040] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.252456] sunxi-ehci: EHCI SUNXI driver
[ 1.257468] get ehci1-controller wakeup-source is fail.
[ 1.263529] sunxi ehci1-controller don't init wakeup source
[ 1.269751] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xffffffe000913098, 0x:ffffffd0040c1000, irq_no:31
[ 1.283372] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply drvvbus not found, using dummy regulator
[ 1.295976] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[ 1.303276] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[ 1.313139] sunxi-ehci 4200000.ehci1-controller: irq 49, io mem 0x04200000
[ 1.341945] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[ 1.349739] sunxi-ehci 4200000.ehci1-controller: ehci_irq: highspeed device connect
[ 1.359272] hub 1-0:1.0: USB hub found
[ 1.363611] hub 1-0:1.0: 1 port detected
[ 1.368828] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.375824] sunxi-ohci: OHCI SUNXI driver
[ 1.380862] get ohci1-controller wakeup-source is fail.
[ 1.386889] sunxi ohci1-controller don't init wakeup source
[ 1.393192] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xffffffe000913bd8
[ 1.403631] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply drvvbus not found, using dummy regulator
[ 1.416229] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[ 1.423491] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[ 1.433328] sunxi-ohci 4200400.ohci1-controller: irq 50, io mem 0x04200400
[ 1.506923] hub 2-0:1.0: USB hub found
[ 1.511158] hub 2-0:1.0: 1 port detected
[ 1.516644] usbcore: registered new interface driver uas
[ 1.522873] usbcore: registered new interface driver usb-storage
[ 1.529638] usbcore: registered new interface driver ums-alauda
[ 1.536385] usbcore: registered new interface driver ums-cypress
[ 1.543240] usbcore: registered new interface driver ums-datafab
[ 1.549996] usbcore: registered new interface driver ums_eneub6250
[ 1.557040] usbcore: registered new interface driver ums-freecom
[ 1.563848] usbcore: registered new interface driver ums-isd200
[ 1.570506] usbcore: registered new interface driver ums-jumpshot
[ 1.577460] usbcore: registered new interface driver ums-karma
[ 1.584242] usbcore: registered new interface driver ums-onetouch
[ 1.591149] usbcore: registered new interface driver ums-realtek
[ 1.597965] usbcore: registered new interface driver ums-sddr09
[ 1.604730] usbcore: registered new interface driver ums-sddr55
[ 1.611391] usbcore: registered new interface driver ums-usbat
[ 1.619072] sunxi_gpadc_init,1968, success
[ 1.624661] sunxi-rtc 7090000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1
[ 1.636923] sunxi-rtc 7090000.rtc: registered as rtc0
[ 1.642738] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
[ 1.651602] sunxi-rtc 7090000.rtc: sunxi rtc probed
[ 1.657515] i2c /dev entries driver
[ 1.661499] IR NEC protocol handler initialized
[ 1.666637] sunxi-ehci 4200000.ehci1-controller: ehci_irq: highspeed device disconnect
[ 1.675485] sunxi-ohci 4200400.ohci1-controller: ohci_irq: fullspeed or lowspeed device connect
[ 1.686000] sunxi cedar version 1.1
[ 1.690153] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[ 1.696447] VE: install start!!!
[ 1.696447]
[ 1.702217] VE: cedar-ve the get irq is 6
[ 1.702217]
[ 1.708531] VE: ve_debug_proc_info:(____ptrval____), data:(____ptrval____), lock:(____ptrval____)
[ 1.708531]
[ 1.720208] VE: install end!!!
[ 1.720208]
[ 1.726162] sunxi-wdt 6011000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 1.735387] Bluetooth: HCI UART driver ver 2.3
[ 1.740344] Bluetooth: HCI UART protocol H4 registered
[ 1.746108] Bluetooth: HCI UART protocol BCSP registered
[ 1.752095] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10
[ 1.759357] [XR_BT_LPM] bluesleep_probe: bt_wake polarity: 1
[ 1.765774] [XR_BT_LPM] bluesleep_probe: host_wake polarity: 1
[ 1.772393] [XR_BT_LPM] bluesleep_probe: wakeup source is disabled!
[ 1.772393]
[ 1.781031] [XR_BT_LPM] bluesleep_probe: uart_index(1)
[ 1.790642] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.19 2021-03-24 19:50)
[ 1.800672] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[ 1.806925] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[ 1.813268] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[ 1.819703] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[ 1.826161] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[ 1.832727] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[ 1.839233] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[ 1.845765] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[ 1.852874] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[ 1.858354] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail
[ 1.865081] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.876212] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[ 1.896399] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.920833] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[ 1.920881] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.938862] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.19 2021-03-24 19:50)
[ 1.948870] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[ 1.955198] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[ 1.961602] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[ 1.968086] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[ 1.974543] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.986200] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[ 1.992748] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[ 1.999278] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[ 2.006062] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[ 2.012697] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[ 2.022091] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.034230] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.045439] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[ 2.054370] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.065987] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.090358] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[ 2.098066] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[ 2.105252] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator
[ 2.116238] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[ 2.123154] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.135029] sunxi_led_probe()1715 - start
[ 2.139686] sunxi_get_str_of_property()1560 - failed to get the string of propname led_regulator!
[ 2.149725] sunxi_register_led_classdev()1448 - led_classdev start
[ 2.157567] sunxi_led_probe()1820 - finish
[ 2.162251] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.174557] usbcore: registered new interface driver usbhid
[ 2.180830] usbhid: USB HID core driver
[ 2.187116] usbcore: registered new interface driver snd-usb-audio
[ 2.194044] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.201677] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.208492] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.217436] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.224280] usb 2-1: new full-speed USB device number 2 using sunxi-ohci
[ 2.231770] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.238552] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 2.252540] sunxi-daudio 2034000.daudio: regulator missing or invalid
[ 2.260796] [AUDIOCODEC][sunxi_codec_parse_params][2094]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1
[ 2.260796]
[ 2.278192] [AUDIOCODEC][sunxi_codec_parse_params][2130]:adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf:0
[ 2.289224] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 2.301246] [AUDIOCODEC][sunxi_internal_codec_probe][2266]:codec probe finished
[ 2.309608] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 2.322752] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[ 2.332675] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[ 2.344496] [SNDCODEC][sunxi_card_init][583]:card init finished
[ 2.351420] mmc0: new high speed SDHC card at address e624
[ 2.358808] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[ 2.369474] mmcblk0: mmc0:e624 SD32G 29.7 GiB
[ 2.377940] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input1
[ 2.390428] [SNDCODEC][sunxi_card_dev_probe][832]:register card finished
[ 2.398977] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[ 2.404014] sunxi-rpaf-dsp soc@3000000:rpaf-dsp@203034c: register device finished!
[ 2.415242] sunxi-rpaf-dsp soc@3000000:rpaf-dsp@203034c: [rpaf_dsp0] probe finished!
[ 2.424459] rpmsg_hifi 3003000.msgbox.sunxi,dsp-msgbox.514.258: id:sunxi,dsp-msgbox new channel: 0x202 -> 0x102!
[ 2.436090] rpmsg_hifi 3003000.msgbox.sunxi,dsp-msgbox.514.258: rpmsg hifi[0] client driver is probed
[ 2.448211] NET: Registered protocol family 10
[ 2.454769] Segment Routing with IPv6
[ 2.459049] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.466573] NET: Registered protocol family 17
[ 2.471598] can: controller area network core (rev 20170425 abi 9)
[ 2.478664] NET: Registered protocol family 29
[ 2.483728] can: raw protocol (rev 20170425)
[ 2.488493] can: broadcast manager protocol (rev 20170425 t)
[ 2.494897] can: netlink gateway (rev 20190810) max_hops=1
[ 2.501422] Bluetooth: RFCOMM TTY layer initialized
[ 2.507001] Bluetooth: RFCOMM socket layer initialized
[ 2.512818] Bluetooth: RFCOMM ver 1.11
[ 2.518049] Loading compiled-in X.509 certificates
[ 2.525660] HDMI 2.0 driver init start!
[ 2.529954] boot_hdmi=false
[ 2.533244] ERROR: pinctrl_get for HDMI2.0 DDC fail
[ 2.540240] HDMI2.0 module init end
[ 2.556752] hub 2-1:1.0: USB hub found
[ 2.571959] hub 2-1:1.0: 4 ports detected
[ 2.583199] twi twi2: twi2 supply twi not found, using dummy regulator
[ 2.599532] pcf857x 2-0038: probed
[ 2.609647] sunxi_i2c_probe()2262 - [i2c2] probe success
[ 2.625827] debugfs: Directory '2034000.daudio' with parent 'sndhdmi' already present!
[ 2.636466] sunxi-audio-card 20340a0.sounddaudio2: 20340a4.hdmiaudio <-> 2034000.daudio mapping ok
[ 2.648330] get ehci0-controller wakeup-source is fail.
[ 2.654345] sunxi ehci0-controller don't init wakeup source
[ 2.660594] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xffffffe000912cd8, 0x:ffffffd005322000, irq_no:2e
[ 2.674130] [sunxi-ehci0]: Not init ehci0
[ 2.679082] get ohci0-controller wakeup-source is fail.
[ 2.685064] sunxi ohci0-controller don't init wakeup source
[ 2.691284] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xffffffe000913818
[ 2.701813] [sunxi-ohci0]: Not init ohci0
[ 2.710131] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.722069] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.729768] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.739559] clk: Not disabling unused clocks
[ 2.744619] ALSA device list:
[ 2.748003] cfg80211: failed to load regulatory.db
[ 2.753460] #0: audiocodec
[ 2.756672] #1: sndhdmi
[ 2.759625] alloc_fd: slot 0 not NULL!
[ 2.768696] EXT4-fs (mmcblk0p5): INFO: recovery required on readonly filesystem
[ 2.777014] EXT4-fs (mmcblk0p5): write access will be enabled during recovery
[ 2.797321] random: fast init done
[ 2.952375] HDMI cable is connected
[ 2.962042] usb 2-1.3: new low-speed USB device number 3 using sunxi-ohci
[ 3.044730] EXT4-fs (mmcblk0p5): recovery complete
[ 3.052136] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.061221] VFS: Mounted root (ext4 filesystem) readonly on device 179:5.
[ 3.069073] devtmpfs: mounted
[ 3.072677] Freeing unused kernel memory: 200K
[ 3.077695] This architecture does not have kernel memory protection.
[ 3.085218] Run /sbin/init as init process
[ 3.151319] input: HID 070a:0026 as /devices/platform/soc@3000000/4200400.ohci1-controller/usb2/2-1/2-1.3/2-1.3:1.0/0003:070A:0026.0001/input/input2
[ 3.232708] hid-generic 0003:070A:0026.0001: input: USB HID v1.10 Keyboard [HID 070a:0026] on usb-sunxi-ohci-1.3/input0
[ 3.252748] input: HID 070a:0026 as /devices/platform/soc@3000000/4200400.ohci1-controller/usb2/2-1/2-1.3/2-1.3:1.1/0003:070A:0026.0002/input/input3
[ 3.332249] hid-generic 0003:070A:0026.0002: input: USB HID v1.10 Device [HID 070a:0026] on usb-sunxi-ohci-1.3/input1
[ 3.441995] usb 2-1.4: new low-speed USB device number 4 using sunxi-ohci
[ 3.629077] input: HID 070a:0025 as /devices/platform/soc@3000000/4200400.ohci1-controller/usb2/2-1/2-1.4/2-1.4:1.0/0003:070A:0025.0003/input/input4
[ 3.644467] hid-generic 0003:070A:0025.0003: input: USB HID v1.00 Mouse [HID 070a:0025] on usb-sunxi-ohci-1.4/input0
[ 3.684608] systemd[1]: System time before build time, advancing clock.
[ 3.706156] systemd[1]: Failed to look up module alias 'autofs4': Function not implemented
[ 3.721304] cgroup2: Unknown parameter 'memory_recursiveprot'
[ 3.749093] systemd[1]: systemd 247.3-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 3.774474] systemd[1]: Detected architecture riscv64.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 3.819957] systemd[1]: Set hostname to <RVBoards>.
[ 3.892191] error: invalid cea_vic code:0
[ 3.896689] [HDMI2 error]: sink do not support this mode:0
[ 5.458698] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 5.683683] systemd[1]: Queued start job for default target Graphical Interface.
[ 5.694704] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.702597] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 5.716574] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 5.727645] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 5.762252] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.770782] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 5.802212] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.810640] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 5.853049] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 5.892703] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 5.932615] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 5.946531] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 5.982367] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 6.014443] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 6.053077] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 6.092781] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 6.159239] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 6.169418] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 6.203426] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 6.243502] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 6.283040] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 6.323034] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 6.333035] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped.
[ 6.347132] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 6.392862] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 6.403885] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[ 6.421609] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 6.476429] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 6.526337] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 6.575307] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 6.589711] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 6.636379] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 6.692969] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 6.735940] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 6.839340] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 6.892726] systemd[1]: modprobe@configfs.service: Succeeded.
[ 6.922271] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 7.035877] systemd[1]: modprobe@drm.service: Succeeded.
[ 7.063657] systemd[1]: Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module drm.
[ 7.104725] systemd[1]: modprobe@fuse.service: Succeeded.
[ 7.132345] systemd[1]: Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Module fuse.
[ 7.154557] systemd[1]: Finished File System Check on Root Device.
[ OK ] Finished File System Check on Root Device.
[ 7.184713] systemd[1]: Finished Load Kernel Modules.
[ OK ] Finished Load Kernel Modules.
[ 7.204758] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 7.246071] systemd[1]: Mounting Kernel Configuration File System...
Mounting Kernel Configuration File System...
[ 7.316288] systemd[1]: Started File System Check Daemon to report status.
[ OK ] Started File System Check Daemon to report status.
[ 7.396366] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 7.446372] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 7.508504] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Mounted Kernel Configuration File System.
[ 7.654208] EXT4-fs (mmcblk0p5): re-mounted. Opts: (null)
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Remount Root and Kernel File Systems.
Activating swap /swapfile...
Starting Flush Journal to Persistent Storage...
Starting Load/Save Random Seed...
Starting Create System Users...
[ 8.172032] systemd-journald[100]: Received client request to flush runtime journal.
[ 8.238119] systemd-journald[100]: File /var/log/journal/a08b1f8fb88040d7bd4028b1be2c5583/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Tell Plymouth To Write Out Runtime Data...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
Starting Create Volatile Files and Directories...
[ 9.282192] Adding 1535996k swap on /swapfile. Priority:-2 extents:5 across:2662396k SS
[ OK ] Activated swap /swapfile.
[ OK ] Reached target Swap.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ 9.904436] proc: Bad value for 'hidepid'
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Finished Coldplug All udev Devices.
Starting Helper to synchronize boot up for ifupdown...
Starting Show Plymouth Boot Screen...
[ OK ] Started Show Plymouth Boot Screen.↵
[ OK ] Started Forward Password R…s to Plymouth Directory Watch.↵
[ OK ] Reached target Local Encrypted Volumes.↵
[ OK ] Reached target Paths.↵
[ OK ] Found device /dev/ttyS0.↵
[ OK ] Reached target Hardware activated USB gadget.↵
[ 12.772000] random: crng init done
[ 12.775788] random: 7 urandom warning(s) missed due to ratelimiting
[ OK ] Finished Load/Save Random Seed.↵
[ OK ] Started Network Time Synchronization.↵
[ OK ] Finished Helper to synchronize boot up for ifupdown.↵
[ OK ] Reached target System Time Set.↵
[ OK ] Reached target System Time Synchronized.↵
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.↵
[ OK ] Started ifup for eth0.↵
Starting Load Kernel Module fuse...↵
Starting Raise network interfaces...↵
Starting Load/Save RF Kill Switch Status...↵
[ OK ] Finished Load Kernel Module fuse.↵
[ OK ] Reached target System Initialization.↵
[ OK ] Started Trigger anacron every hour.↵
[ OK ] Started Daily apt download activities.↵
[ OK ] Started Daily apt upgrade and clean activities.↵
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.↵
[ OK ] Started Daily exim4-base housekeeping.↵
[ OK ] Started Discard unused blocks once a week.↵
[ OK ] Started Daily rotation of log files.↵
[ OK ] Started Daily man-db regeneration.↵
[ OK ] Started Daily Cleanup of Temporary Directories.↵
[ OK ] Reached target Timers.↵
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.↵
[ OK ] Listening on D-Bus System Message Bus Socket.↵
[ OK ] Reached target Sockets.↵
[ OK ] Reached target Basic System.↵
Starting Save/Restore Sound Card State...↵
[ OK ] Started Run anacron jobs.↵
Starting Avahi mDNS/DNS-SD Stack...↵
[ OK ] Started Regular background program processing daemon.↵
[ OK ] Started D-Bus System Message Bus.↵
[ 16.252159] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[ 16.358914] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
Starting Connection service...↵
Starting DUN service...↵
Starting Remove Stale Onli…t4 Metadata Check Snapshots...↵
Starting Telephony service...↵
Starting System Logging Service...↵
Starting User Login Management...↵
Starting Disk Manager...↵
Starting WPA supplicant...↵
[ OK ] Started Load/Save RF Kill Switch Status.↵
[ 16.857532] proc: Bad value for 'hidepid'
[ OK ] Finished Save/Restore Sound Card State.↵
[ OK ] Reached target Sound Card.↵
[ OK ] Started System Logging Service.↵
[ 17.021025] libphy: 4500000.eth: probed
[ 17.073003] sunxi-gmac 4500000.eth eth0: eth0: Type(8) PHY ID 001cc916 at 0 IRQ poll (4500000.eth-0:00)
[ OK ] Started Avahi mDNS/DNS-SD Stack.↵
[ OK ] Started DUN service.↵
[ OK ] Started Telephony service.↵
[ OK ] Started WPA supplicant.↵
[ OK ] Started Connection service.↵
Starting Wait for network to be configured by ConnMan...↵
[ OK ] Started User Login Management.↵
Starting Authorization Manager...↵
[ OK ] Started Authorization Manager.↵
Starting Hostname Service...↵
[ 18.789632] proc: Bad value for 'hidepid'
[ OK ] Started Disk Manager.↵
[ OK ] Started Hostname Service.↵
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.↵
[ 20.322164] sunxi-gmac 4500000.eth eth0: Link is Up - 100Mbps/Full - flow control off
[ 20.330930] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ OK ] Finished Wait for network to be configured by ConnMan.↵
[ OK ] Finished Raise network interfaces.↵
[ OK ] Reached target Network.↵
[ OK ] Reached target Network is Online.↵
Starting LSB: exim Mail Transport Agent...↵
Starting /etc/rc.local Compatibility...↵
Starting OpenBSD Secure Shell server...↵
[ 24.634552] rc.local[273]: led↵
Starting Permit User Sessions...↵
[ OK ] Finished Permit User Sessions.↵
Starting Light Display Manager...↵
[ 33.122001] usb1-vbus: disabling
[ 37.835698] rc.local[579]: resize2fs 1.46.2 (28-Feb-2021)
[ 37.871981] rc.local[579]: The filesystem is already 7297524 (4k) blocks long. Nothing to do!
[ 40.742268] ======== XRADIO WIFI OPEN ========
[ 40.772051] [XRADIO] Driver Label:XR_V02.16.84_P2P_HT40_01.31
[ 40.778834] [XRADIO] Allocated hw_priv @ 00000000c183a628
[ 40.810861] sunxi-rfkill soc@3000000:rfkill@0: bus_index: 1
[ 40.849339] sunxi-rfkill soc@3000000:rfkill@0: wlan power on success
[ 41.525654] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 41.541986] [XRADIO] Detect SDIO card 1
[ 41.561662] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[ 41.601896] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 41.639006] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 41.666471] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 41.708509] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 41.731526] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 41.748651] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[ 41.774237] mmc1: new high speed SDIO card at address 0001
[ 41.792519] [SBUS] XRadio Device:sdio clk=50000000
[ 41.891133] [XRADIO] XRADIO_HW_REV 1.0 detected.
[ 42.002710] [XRADIO] xradio_update_dpllctrl: DPLL_CTRL Sync=0x00c00000.
[ 42.492057] [XRADIO] Bootloader complete
[ 42.977909] [XRADIO] Firmware completed.
[ 42.992045] [BH_WRN] miss interrupt!
[ 42.996173] [WSM] Firmware Label:XR_C09.08.52.64_DBG_02.100 2GHZ HT40 Jan 3 2020 13:14:37
[ 43.034192] [XRADIO] Firmware Startup Done.
[ 43.051698] [XRADIO_WRN] enable Multi-Rx!
[ 43.085241] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 43.140106] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.220606] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.247076] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.264780] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.303537] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.324405] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.340081] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.350774] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.360401] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.375950] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.395771] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.405880] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.415966] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.426727] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.444472] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.483501] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.493519] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.503616] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.530398] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.537810] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.546704] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.554984] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.563147] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.602365] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.609633] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.622568] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.629776] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.638469] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.649565] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.658149] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.666536] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.682792] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.690357] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.702100] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.709669] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.718668] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.732882] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.740545] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[ 43.767701] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.775885] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.784147] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.791364] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.812553] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.821622] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.832560] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.839780] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.851510] [ 43.854240] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
rc.local[604]: Successfully init[ 43.862741] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
ialized wpa_supplicant
[ 43.874972] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.894026] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.901539] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.911493] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.922917] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.936426] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.944988] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 43.957395] rc.local[604]: rfkill: WLAN soft[ 43.961495] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
blocked
[ 43.993423] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 44.001099] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1
[ 44.791565] raw_flag value is 0
[ 44.803223] rc.local[604]: rfkill: WLAN soft[ 44.807695] sunxi->update_param:1
blocked
[ 44.815961] WARN:audio is not on
[ 44.819566] HDMI Audio Enable Successfully
[ 44.872699] raw_flag value is 0
[ 44.876252] sunxi->update_param:1
[ 44.879952] WARN:audio is not on
[ 44.885315] HDMI Audio Enable Successfully
[ 44.893567] raw_flag value is 0
[ 44.897121] sunxi->update_param:1
[ 44.900819] WARN:audio is not on
[ 44.906129] HDMI Audio Enable Successfully
[ 44.923700] raw_flag value is 0
[ 44.951651] raw_flag value is 0
[ 44.960918] disp 0, type 4, mode5
[ 44.964469] [ 44.966699] sunxi->update_param:1
rc.local[273]: hdmi init start
[ 44.971647] WARN:audio is not on
[ 44.985054] HDMI Audio Enable Successfully
[ 45.010091] raw_flag value is 0
[ 45.023097] sunxi->update_param:1
[ 45.026801] WARN:audio is not on
[ 45.030397] HDMI Audio Enable Successfully
[ 45.050321] raw_flag value is 0
[ 45.062559] sunxi->update_param:1
[ 45.066264] WARN:audio is not on
[ 45.069860] HDMI Audio Enable Successfully
[ 45.095749] raw_flag value is 0
[ 45.101589] raw_flag value is 0
[ 45.107312] sunxi->update_param:1
[ 45.111016] WARN:audio is not on
[ 45.116802] HDMI Audio Enable Successfully
[ 45.124697] raw_flag value is 0
[ 45.128247] sunxi->update_param:1
[ 45.142868] WARN:audio is not on
[ 45.146472] HDMI Audio Enable Successfully
[ 45.157229] raw_flag value is 0
[ 45.161171] sunxi->update_param:1
[ 45.166398] WARN:audio is not on
[ 45.170002] HDMI Audio Enable Successfully
[ 45.189799] raw_flag value is 0
[ 45.193653] sunxi->update_param:1
[ 45.197356] WARN:audio is not on
[ 45.200953] HDMI Audio Enable Successfully
[ 45.209845] raw_flag value is 0
[ 45.214311] sunxi->update_param:1
[ 45.218015] WARN:audio is not on
[ 45.221610] HDMI Audio Enable Successfully
[ 45.230277] raw_flag value is 0
[ 45.234853] sunxi->update_param:1
[ 45.238555] WARN:audio is not on
[ 45.243573] HDMI Audio Enable Successfully
[ 45.250630] raw_flag value is 0
[ 45.262086] sunxi->update_param:1
[ 45.265791] WARN:audio is not on
[ 45.269387] HDMI Audio Enable Successfully
[ 45.287975] raw_flag value is 0
[ 45.291526] sunxi->update_param:1
[ 45.296690] WARN:audio is not on
[ 45.300295] HDMI Audio Enable Successfully
[ 45.308580] raw_flag value is 0
[ 45.313055] sunxi->update_param:1
[ 45.316758] WARN:audio is not on
[ 45.320355] HDMI Audio Enable Successfully
[ 45.328983] raw_flag value is 0
[ 45.333487] sunxi->update_param:1
[ 45.337189] WARN:audio is not on
[ 45.340784] HDMI Audio Enable Successfully
[ 45.366720] raw_flag value is 0
[ 45.436772] raw_flag value is 0
[ 46.032010] [HDMI receive params]: tv mode: 0x5 format:0x1 data bits:0x0 eotf:0x4 cs:0x101 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8
[ 47.122025] disp_al_manager_apply ouput_type:0
[ 47.127702] disp_al_hdmi_cfg
[ 47.243850] HDMI Audio Enable Successfully
[ 47.248453] [DISP] disp_device_attached_and_enable,line:233:
[ 47.248458] attached ok, mgr0<-->dev0
[ 47.281986] [DISP] disp_device_attached_and_enable,line:236:
[ 47.281997] type:4,mode:5,fmt:yuv444,bits:8bits,eotf:4,cs:257 dvi_hdmi:2, range:2 scan:0 ratio:8
[ 47.312485] rc.local[273]: hdmi init end
↵
Debian GNU/Linux 11 RVBoards ttyS0
RVBoards login: root↵
Password:
Linux RVBoards 5.4.61 #3 PREEMPT Mon May 24 01:59:34 UTC 2021 riscv64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sat Jun 19 07:09:47 JST 2021 on ttyS0
root@RVBoards:~# uname -a
↵
Linux RVBoards 5.4.61 #3 PREEMPT Mon May 24 01:59:34 UTC 2021 riscv64 GNU/Linux
root@RVBoards:~# cat /proc/cpuinfo
↵
processor : 0
hart : 0
isa : rv64imafdcvu
mmu : sv39
root@RVBoards:~# cat /proc/interrupts
↵
CPU0
1: 0 SiFive PLIC 77 sunxikbd
4: 0 SiFive PLIC 80 2010000.iommu
5: 0 sunxi_pio_edge 2 2-0038
6: 0 SiFive PLIC 82 cedar_dev
8: 0 SiFive PLIC 160 7090000.rtc
18: 826 SiFive PLIC 18 uart0
26: 0 SiFive PLIC 102 3003000.msgbox
27: 3 SiFive PLIC 27 twi2
29: 0 SiFive PLIC 105 5410000.g2d
31: 3352 SiFive PLIC 107 dispaly
32: 0 SiFive PLIC 32 spi1
33: 2751 SiFive PLIC 108
36: 2 SiFive PLIC 36 ledcirq
41: 0 SiFive PLIC 41 audio jack irq
49: 2 SiFive PLIC 49 ehci_hcd:usb1
50: 120 SiFive PLIC 50 ohci_hcd:usb2
56: 4558 SiFive PLIC 56 mmc0
57: 4178 SiFive PLIC 57 mmc1
62: 86 SiFive PLIC 62 4500000.eth
64: 0 SiFive PLIC 140 3003000.msgbox
66: 26 SiFive PLIC 66 3002000.dma-controller
70: 0 SiFive PLIC 144 3003000.msgbox
75: 0 SiFive PLIC 75 timer@2050000
179: 0 sunxi_pio_edge 134 4020000.sdmmc cd
root@RVBoards:~# cat /proc/iomem
↵
01701000-01701fff : 3003000.msgbox msgbox@0601f000
02000000-020004ff : 2000000.pinctrl pinctrl@2000000
02001000-02001fff : 2001000.clock clock@2001000
02008000-020083ff : ledc@2008000
02010000-02010fff : 2010000.iommu iommu@2010000
02030000-0203034b : sunxi-internal-codec
02031000-0203104f : sunxi-dmic
02034000-0203409f : sunxi-daudio
02500000-025003ff : uart
02500400-025007ff : uart
02502800-02502bff : twi@2502800
03000030-03000033 : 4500000.eth eth@4500000
03002000-03002fff : 3002000.dma-controller dma-controller@3002000
03003000-03003fff : 3003000.msgbox msgbox@0601f000
03006000-03006fff : 3006000.sid sid@3006000
04020000-04020fff : 4020000.sdmmc sdmmc@4020000
04021000-04021fff : 4021000.sdmmc sdmmc@4021000
04026000-04026fff : 4026000.spi
04500000-0450ffff : 4500000.eth eth@4500000
06011000-0601101f : 6011000.watchdog watchdog@6011000
0601f000-0601ffff : 3003000.msgbox msgbox@0601f000
07010000-0701023f : 7010000.clock clock@7010000
07090000-0709031f : 7090000.rtc rtc@7090000
40200000-7fffffff : System RAM
40200000-40231fff : Kernel code
408300c6-40b279fb : Kernel data
root@RVBoards:~#