processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.60GHz stepping : 9 cpu MHz : 2600.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pebs bts cid xtpr bogomips : 5187.07 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 32 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.60GHz stepping : 9 cpu MHz : 2600.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pebs bts cid xtpr bogomips : 5185.89 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 32 bits virtual power management: -[0000:00]-+-00.0 Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] +-02.0 Intel Corporation 82865G Integrated Graphics Controller [8086:2572] +-06.0 Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] +-1d.3 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] +-1e.0-[03]----0b.0 Intel Corporation 82541EI Gigabit Ethernet Controller [8086:1013] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] +-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] +-1f.3 Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] \-1f.5 Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] # dmidecode 2.11 SMBIOS version fixup (2.31 -> 2.3). SMBIOS 2.3 present. 57 structures occupying 2076 bytes. Table at 0x000EF790. Handle 0x0000, DMI type 0, 20 bytes BIOS Information Vendor: IBM Version: 2AKT51AUS Release Date: 07/06/2005 Address: 0xE4500 Runtime Size: 113408 bytes ROM Size: 512 kB Characteristics: PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported EDD is supported ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported Smart battery is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: IBM Product Name: 81838HJ Version: Not Specified Serial Number: XXXXXXX UUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: IBM Product Name: IBM Version: Not Specified Serial Number: Not Specified Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: IBM Type: Low Profile Desktop Lock: Not Present Version: Not Specified Serial Number: Not Specified Asset Tag: ......................... Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: WMT478/NWD Type: Central Processor Family: Pentium 4 Manufacturer: GenuineIntel ID: 29 0F 00 00 FF FB EB BF Signature: Type 0, Family 15, Model 2, Stepping 9 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Pentium(R) 4 CPU 2.60GHz Voltage: 1.8 V External Clock: 100 MHz Max Speed: 3400 MHz Current Speed: 2600 MHz Status: Populated, Enabled Upgrade: Socket 478 L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 8 kB Maximum Size: 256 kB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Unknown System Type: Data Associativity: Unknown Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 kB Maximum Size: 512 kB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0007, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: COM 1 External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x0008, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J39 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: COM 2 External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x0009, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J20 Internal Connector Type: 25 Pin Dual Inline (pin 26 cut) External Reference Designator: Parallel External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1M1 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1M1 Internal Connector Type: None External Reference Designator: PS/2 Mouse External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: 4REARUSB/BOT Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: 4REARUSB/MIDL Internal Connector Type: None External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: 4REARUSB/MIDH Internal Connector Type: None External Reference Designator: USB 3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: 4REARUSB/TOP Internal Connector Type: None External Reference Designator: USB 4 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: 2REARUSB/BOT Internal Connector Type: None External Reference Designator: USB 5 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: 2REARUSB/TOP Internal Connector Type: None External Reference Designator: USB 6 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FRONTUSB/BOT Internal Connector Type: None External Reference Designator: USB 7 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FRONTUSB/TOP Internal Connector Type: None External Reference Designator: USB 8 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Audio Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Audio Line Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Microphone External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J12 Internal Connector Type: None External Reference Designator: Network External Connector Type: RJ-45 Port Type: Network Port Handle 0x0018, DMI type 126, 13 bytes Inactive Handle 0x0019, DMI type 9, 13 bytes System Slot Information Designation: PCI Slot #1 - J1001I Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 3.3 V is provided Handle 0x001A, DMI type 9, 13 bytes System Slot Information Designation: PCI Slot #2 - J901I Type: 32-bit PCI Current Usage: Available Length: Long ID: 2 Characteristics: 3.3 V is provided Handle 0x001B, DMI type 9, 13 bytes System Slot Information Designation: PCI Slot #3 - J901I Type: 32-bit PCI Current Usage: Available Length: Long ID: 3 Characteristics: 3.3 V is provided Handle 0x001C, DMI type 10, 6 bytes On Board Device Information Type: Other Status: Enabled Description: IBM Embedded Security Hardware Type 3 Handle 0x001D, DMI type 10, 6 bytes On Board Device Information Type: Sound Status: Enabled Description: AD1981 Handle 0x001E, DMI type 11, 5 bytes OEM Strings String 1: BB:2A35A Handle 0x001F, DMI type 12, 5 bytes System Configuration Options Option 1: JP 7: 1-2 Normal, 2-3 Clear CMOS/Boot Block Recovery Handle 0x0020, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Abbreviated Installable Languages: 1 enUS Currently Installed Language: enUS Handle 0x0021, DMI type 15, 29 bytes System Event Log Area Length: 32 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: General-purpose non-volatile data functions Access Address: 0x0000 Status: Valid, Not Full Change Token: 0x00000001 Header Format: Type 1 Supported Log Type Descriptors: 3 Descriptor 1: POST error Data Format 1: POST results bitmap Descriptor 2: Single-bit ECC memory error Data Format 2: Multiple-event Descriptor 3: Multi-bit ECC memory error Data Format 3: Multiple-event Handle 0x0022, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0023, DMI type 17, 27 bytes Memory Device Array Handle: 0x0022 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: 1 Locator: J4 Bank Locator: CH_A_DIMM0 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0024, DMI type 17, 27 bytes Memory Device Array Handle: 0x0022 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 1 Locator: J5 Bank Locator: CH_A_DIMM1 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0025, DMI type 17, 27 bytes Memory Device Array Handle: 0x0022 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: 1 Locator: J15 Bank Locator: CH_B_DIMM0 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0026, DMI type 17, 27 bytes Memory Device Array Handle: 0x0022 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 1 Locator: J16 Bank Locator: CH_B_DIMM1 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0027, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x0022 Partition Width: 2 Handle 0x0028, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0023 Memory Array Mapped Address Handle: 0x0027 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0029, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x0003FFFFC00 Ending Address: 0x0003FFFFFFF Range Size: 1 kB Physical Device Handle: 0x0024 Memory Array Mapped Address Handle: 0x0027 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002A, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00040000000 Ending Address: 0x0007FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0025 Memory Array Mapped Address Handle: 0x0027 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x0007FFFFC00 Ending Address: 0x0007FFFFFFF Range Size: 1 kB Physical Device Handle: 0x0026 Memory Array Mapped Address Handle: 0x0027 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002C, DMI type 23, 13 bytes System Reset Status: Enabled Watchdog Timer: Present Boot Option: Do Not Reboot Boot Option On Limit: Do Not Reboot Reset Count: Unknown Reset Limit: Unknown Timer Interval: Unknown Timeout: Unknown Handle 0x002D, DMI type 24, 5 bytes Hardware Security Power-On Password Status: Disabled Keyboard Password Status: Enabled Administrator Password Status: Disabled Front Panel Reset Status: Not Implemented Handle 0x002E, DMI type 25, 9 bytes System Power Controls Next Scheduled Power-on: 12-31 23:59:59 Handle 0x002F, DMI type 26, 20 bytes Voltage Probe Description: Voltage Probe Location: Processor Status: OK Maximum Value: Unknown Minimum Value: Unknown Resolution: Unknown Tolerance: Unknown Accuracy: Unknown OEM-specific Information: 0x00000000 Handle 0x0030, DMI type 27, 12 bytes Cooling Device Temperature Probe Handle: 0x0031 Type: Fan Status: OK OEM-specific Information: 0x00000000 Handle 0x0031, DMI type 28, 20 bytes Temperature Probe Description: Temperature Probe Location: Processor Status: OK Maximum Value: Unknown Minimum Value: Unknown Resolution: Unknown Tolerance: Unknown Accuracy: Unknown OEM-specific Information: 0x00000000 Handle 0x0032, DMI type 29, 20 bytes Electrical Current Probe Description: Electrical Current Probe Location: Processor Status: OK Maximum Value: Unknown Minimum Value: Unknown Resolution: Unknown Tolerance: Unknown Accuracy: Unknown OEM-specific Information: 0x00000000 Handle 0x0033, DMI type 30, 6 bytes Out-of-band Remote Access Manufacturer Name: Intel Inbound Connection: Enabled Outbound Connection: Disabled Handle 0x0034, DMI type 32, 20 bytes System Boot Information Status: Handle 0x0035, DMI type 126, 5 bytes Inactive Handle 0x0036, DMI type 126, 4 bytes Inactive Handle 0x0037, DMI type 127, 4 bytes End Of Table Handle 0x0038, DMI type 127, 4 bytes End Of Table Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-358.23.2.el6.i686 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Oct 16 11:13:24 CDT 2013 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007df70000 (usable) BIOS-e820: 000000007df70000 - 000000007df7a000 (ACPI data) BIOS-e820: 000000007df7a000 - 000000007df80000 (ACPI NVS) BIOS-e820: 000000007df80000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) DMI present. SMBIOS version 2.31 @ 0xF6430 DMI: IBM 81838HJ/IBM, BIOS 2AKT51AUS 07/06/2005 e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7df70 max_arch_pfn = 0x400000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-E3FFF uncachable E4000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07DF80000 mask FFFF80000 uncachable 2 base 07E000000 mask FFE000000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2063872KB, range: 512KB, type UC reg 2, base: 2016MB, range: 32MB, type UC total RAM covered: 2015M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2063872KB, range: 512KB, type UC reg 2, base: 2016MB, range: 32MB, type UC initial memory mapped : 0 - 01000000 init_memory_mapping: 0000000000000000-00000000375fe000 Using x86 segment limits to approximate NX protection 0000000000 - 0000200000 page 4k 0000200000 - 0037400000 page 2M 0037400000 - 00375fe000 page 4k kernel direct mapping tables up to 375fe000 @ 7000-f000 RAMDISK: 37191000 - 37fef2b1 Allocated new RAMDISK: 00c79000 - 01ad72b1 Move RAMDISK from 0000000037191000 - 0000000037fef2b0 to 00c79000 - 01ad72b0 ACPI: RSDP 000f64a0 00014 (v00 PTLTD ) ACPI: RSDT 7df7509c 00038 (v01 PTLTD RSDT 060400D0 LTP 00000000) ACPI: FACP 7df79e93 00074 (v01 IBM THINKCEN 060400D0 PTL 00000001) ACPI: DSDT 7df750d4 04DBF (v01 IBM THINKCEN 060400D0 MSFT 0100000E) ACPI: FACS 7df7afc0 00040 ACPI: TCPA 7df79f07 00032 (v01 IBM THINKCEN 060400D0 PTL 00000001) ACPI: APIC 7df79f39 00068 (v01 PTLTD ? APIC 060400D0 LTP 00000000) ACPI: BOOT 7df79fa1 00028 (v01 PTLTD $SBFTBL$ 060400D0 LTP 00000001) ACPI: SSDT 7df79fc9 00037 (v01 PTLTD ACPIHT 060400D0 LTP 00000001) ACPI: Local APIC address 0xfee00000 1129MB HIGHMEM available. 885MB LOWMEM available. mapped low ram: 0 - 375fe000 low ram: 0 - 375fe000 node 0 low ram: 00000000 - 375fe000 node 0 bootmap 0000b000 - 00011ec0 (9 early reservations) ==> bootmem [0000000000 - 00375fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0000c6f610] TEXT DATA BSS ==> [0000400000 - 0000c6f610] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [0000c70000 - 0000c7811c] BRK ==> [0000c70000 - 0000c7811c] #6 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000] #7 [0000c79000 - 0001ad72b1] NEW RAMDISK ==> [0000c79000 - 0001ad72b1] #8 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000] found SMP MP-table at [c00f63f0] f63f0 Reserving 129MB of memory at 32MB for crashkernel (System RAM: 2015MB) Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal 0x00001000 -> 0x000375fe HighMem 0x000375fe -> 0x0007df70 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007df70 On node 0 totalpages: 515854 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3966 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 2259 pages used for memmap HighMem zone: 286879 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Booting paravirtualized kernel on bare hardware NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @cae00000 s36088 r0 d21256 u1048576 pcpu-alloc: s36088 r0 d21256 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511823 Kernel command line: ro root=UUID=3a37b8be-3b54-4b9f-a95f-9d9ab0933167 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000375fe:0007df70) Memory: 1889448k/2063808k available (4421k kernel code, 172976k reserved, 2498k data, 512k init, 1156552k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) .init : 0xc0ac3000 - 0xc0b43000 ( 512 kB) .data : 0xc0851658 - 0xc0ac20c8 (2498 kB) .text : 0xc0400000 - 0xc0851658 (4421 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:2304 nr_irqs:424 Console: colour VGA+ 80x25 console [tty0] enabled allocated 4194304 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 2593.535 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.07 BogoMIPS (lpj=2593535) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) ACPI: Core revision 20090903 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 Performance Events: Netburst events, Netburst P4/Xeon PMU driver. ... version: 0 ... bit width: 40 ... generic registers: 18 ... value mask: 000000ffffffffff ... max period: 0000007fffffffff ... fixed-purpose events: 0 ... event mask: 000000000003ffff Booting Node 0, Processors #1 Ok. Initializing CPU#1 CPU1: Thermal monitoring handled by SMI Brought up 2 CPUs Total of 2 processors activated (10372.96 BogoMIPS). sizeof(vma)=100 bytes sizeof(page)=32 bytes sizeof(inode)=352 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=508 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=1348 bytes devtmpfs: initialized PM: Registering ACPI NVS region at 7df7a000 (24576 bytes) regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. HEST: Table not found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x7df80000-0xfebfffff] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci 0000:00:00.0: Enabling MCH 'Overflow' Device pci 0000:00:00.0: reg 10: [mem 0xec000000-0xefffffff pref] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] pci 0000:00:02.0: reg 14: [mem 0xe8000000-0xe807ffff] pci 0000:00:02.0: reg 18: [io 0x1800-0x1807] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f] pci 0000:00:1d.7: reg 10: [mem 0xe8080000-0xe80803ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf] pci 0000:00:1f.5: reg 10: [io 0x1c00-0x1cff] pci 0000:00:1f.5: reg 14: [io 0x18c0-0x18ff] pci 0000:00:1f.5: reg 18: [mem 0xe8080c00-0xe8080dff] pci 0000:00:1f.5: reg 1c: [mem 0xe8080800-0xe80808ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:03:0b.0: reg 10: [mem 0xe8100000-0xe811ffff] pci 0000:03:0b.0: reg 18: [io 0x2000-0x203f] pci 0000:03:0b.0: PME# supported from D0 D3hot D3cold pci 0000:03:0b.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1e.0: bridge window [mem 0xe8100000-0xe81fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [io 0x0010-0x001f] pnp 00:01: [io 0x0024-0x0025] pnp 00:01: [io 0x0028-0x0029] pnp 00:01: [io 0x002c-0x002d] pnp 00:01: [io 0x002e-0x002f] pnp 00:01: [io 0x0030-0x0031] pnp 00:01: [io 0x0034-0x0035] pnp 00:01: [io 0x0038-0x0039] pnp 00:01: [io 0x003c-0x003d] pnp 00:01: [io 0x004e-0x004f] pnp 00:01: [io 0x0072-0x0077] pnp 00:01: [io 0x0080] pnp 00:01: [io 0x0090-0x009f] pnp 00:01: [io 0x00a4-0x00a5] pnp 00:01: [io 0x00a8-0x00a9] pnp 00:01: [io 0x00ac-0x00ad] pnp 00:01: [io 0x00b0-0x00b5] pnp 00:01: [io 0x00b8-0x00b9] pnp 00:01: [io 0x00bc-0x00bd] pnp 00:01: [io 0x04d0-0x04d1] pnp 00:01: [io 0x0800-0x087f] pnp 00:01: [io 0x1000-0x107f] pnp 00:01: [io 0x1100-0x111f] pnp 00:01: [io 0x1180-0x11bf] pnp 00:01: [io 0xe000-0xe00f] pnp 00:01: [io 0xfe00] pnp 00:01: [io 0xfe10-0xfe11] pnp 00:01: [mem 0xfed20000-0xfed8ffff] pnp 00:01: [mem 0xfed90000-0xfed903ff] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0081-0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: [dma 4] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x00f0-0x00fe] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0070-0x0071] pnp 00:04: [irq 8] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [mem 0xff800000-0xffffffff] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [irq 12] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [io 0x03f0-0x03f5] pnp 00:0b: [io 0x03f7] pnp 00:0b: [irq 6] pnp 00:0b: [dma 2] pnp 00:0b: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:0c: [io 0x03f8-0x03ff] pnp 00:0c: [irq 4] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0d: [io 0x02f8-0x02ff] pnp 00:0d: [irq 3] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0e: [io 0x0378-0x037f] pnp 00:0e: [io 0x0778-0x077f] pnp 00:0e: [irq 7] pnp 00:0e: [dma 3] pnp 00:0e: Plug and Play ACPI device, IDs PNP0401 (active) pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0800-0x087f] has been reserved system 00:01: [io 0x1000-0x107f] has been reserved system 00:01: [io 0x1100-0x111f] has been reserved system 00:01: [io 0x1180-0x11bf] has been reserved system 00:01: [io 0xe000-0xe00f] has been reserved system 00:01: [io 0xfe00] has been reserved system 00:01: [io 0xfe10-0xfe11] has been reserved system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:01: [mem 0xfed90000-0xfed903ff] has been reserved PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff] pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff] pci 0000:00:1e.0: PCI bridge to [bus 03-03] pci 0000:00:1e.0: PCI bridge to [bus 03-03] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1e.0: bridge window [mem 0xe8100000-0xe81fffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] pci_bus 0000:03: resource 1 [mem 0xe8100000-0xe81fffff] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1d.0: PCI INT A disabled alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1d.1: PCI INT B disabled alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1d.2: PCI INT C disabled pci 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1d.3: PCI INT A disabled alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1d.7: PCI INT D disabled Trying to unpack rootfs image as initramfs... Freeing initrd memory: 14712k freed Simple Boot Flag at 0x35 set to 0x1 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1388771628.769:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1462 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 411F551AFA9216FA - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (57 C) ERST: Table is not found! GHES: HEST is not enabled! isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable agpgart-intel 0000:00:00.0: detected 32768K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8080000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-358.23.2.el6.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-358.23.2.el6.i686 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-358.23.2.el6.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-358.23.2.el6.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-358.23.2.el6.i686 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PSM] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos 00:04: setting system clock to 2014-01-03 17:53:50 UTC (1388771630) Initalizing network drop monitor service Freeing unused kernel memory: 512k freed Write protecting the kernel text: 4424k Write protecting the kernel read-only data: 1920k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 dracut: dracut-004-303.el6 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation Refined TSC clocksource calibration: 2593.499 MHz. Switching to clocksource tsc device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com udev: starting version 147 psmouse serio1: ID: 10 00 64 [drm] Initialized drm 1.1.0 20060810 IBM TrackPoint firmware: 0x0b, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x64 fb0: inteldrmfb frame buffer device drm: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata1.00: HPA detected: current 154523346, native 160086528 ata1.00: ATA-7: Maxtor 6Y080P0, YAR41BW0, max UDMA/133 ata1.00: 154523346 sectors, multi 16: LBA ata1.01: ATAPI: LTN486S, YUS8, max UDMA/33 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080P0 YAR4 PQ: 0 ANSI: 5 scsi 0:0:1:0: CD-ROM LITEON CD-ROM LTN486S YUS8 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: [sda] 154523346 512-byte logical blocks: (79.1 GB/73.6 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/sda1 SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1388771632.861:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root readahead: starting udev: starting version 147 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 0:0:1:0: Attached scsi generic sg1 type 5 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ACPI: resource 0000:00:1f.3 [io 0x18a0-0x18bf] conflicts with ACPI region SMBR [io 0x18a0-0x18a7] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 49928 usecs (2234 samples) intel8x0: clocking to 51492 microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e platform microcode: firmware: requesting intel-ucode/0f-02-09 microcode: CPU1 sig=0xf29, pf=0x4, revision=0x2e platform microcode: firmware: requesting intel-ucode/0f-02-09 Microcode Update Driver: v2.00 , Peter Oruba e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000 0000:03:0b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000 0000:03:0b.0: eth0: (PCI:33MHz:32-bit) xx:xx:xx:xx:xx:xx e1000 0000:03:0b.0: eth0: Intel(R) PRO/1000 Network Connection parport_pc 00:0e: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ppdev: user-space parallel port driver Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Adding 1029112k swap on /dev/sda2. Priority:-1 extents:1 across:1029112k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module.