processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 6 cpu MHz : 797.398 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pse36 mmx fxsr sse up bogomips : 1594.79 clflush size : 32 cache_alignment : 32 address sizes : 36 bits physical, 32 bits virtual power management: -[0000:00]-+-00.0 Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub [8086:7124] +-01.0 Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller [8086:7125] +-1e.0-[01]----02.0 Accton Technology Corporation SMC2-1211TX [1113:1211] +-1f.0 Intel Corporation 82801AA ISA Bridge (LPC) [8086:2410] +-1f.1 Intel Corporation 82801AA IDE Controller [8086:2411] +-1f.2 Intel Corporation 82801AA USB Controller [8086:2412] +-1f.3 Intel Corporation 82801AA SMBus Controller [8086:2413] \-1f.5 Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] # dmidecode 2.11 SMBIOS 2.2 present. 42 structures occupying 1951 bytes. Table at 0x000F0520. Handle 0x0000, DMI type 0, 19 bytes BIOS Information Vendor: American Megatrends Inc. Version: /176A0700 Release Date: 10/24/00 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 512 kB Characteristics: PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: NEC Product Name: PC-MA80TSZTTDF7 Version: Serial Number: XXXXXXXXX UUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX Wake-up Type: Other Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: NEC Product Name: MS-6137 Version: Serial Number: XXXXXXXXX Handle 0x0003, DMI type 3, 13 bytes Chassis Information Manufacturer: NEC Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None Handle 0x0004, DMI type 4, 32 bytes Processor Information Socket Designation: CPU M/B Type: Central Processor Family: Pentium III Manufacturer: Intel Corporation ID: 86 06 00 00 55 00 00 00 Signature: Type 0, Family 6, Model 8, Stepping 6 Flags: FPU (Floating-point unit on-chip) DE (Debugging extension) TSC (Time stamp counter) PAE (Physical address extension) Version: Intel Pentium(R) III processor Voltage: 2.0 V External Clock: 133 MHz Max Speed: 800 MHz Current Speed: 800 MHz Status: Populated, Enabled Upgrade: 370-pin Socket L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: None System Type: Unified Associativity: 4-way Set-associative Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 256 kB Maximum Size: 256 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: None System Type: Unified Associativity: Other Handle 0x0007, DMI type 5, 20 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 256 MB Maximum Total Memory Size: 512 MB Supported Speeds: Other Supported Memory Types: DIMM SDRAM Memory Module Voltage: 3.3 V Associated Memory Slots: 2 0x0008 0x0009 Enabled Error Correcting Capabilities: None Handle 0x0008, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM1 M/B Bank Connections: 0 1 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x0009, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM2 M/B Bank Connections: 2 3 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x000A, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Handle 0x000B, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Available Length: Long ID: 2 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Handle 0x000C, DMI type 9, 13 bytes System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 3 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Handle 0x000D, DMI type 11, 5 bytes OEM Strings String 1: PC-MA80TSZTMLF7ZDRAB String 2: String 3: Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: Mouse External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: Mic In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: Line Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: Serial Port 1 External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: Parallel External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB2 M/B Internal Connector Type: Proprietary External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: Monitor External Connector Type: DB-15 female Port Type: Video Port Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FDD M/B Internal Connector Type: On Board Floppy External Reference Designator: External Connector Type: None Port Type: Other Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: IDE1 M/B Internal Connector Type: On Board IDE External Reference Designator: External Connector Type: None Port Type: Other Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: IDE2 M/B Internal Connector Type: On Board IDE External Reference Designator: External Connector Type: None Port Type: Other Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CDIN M/B Internal Connector Type: On Board Sound Input From CD-ROM External Reference Designator: External Connector Type: None Port Type: Audio Port Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: GamePort/MIDI External Connector Type: DB-15 female Port Type: MIDI Port Handle 0x001D, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Abbreviated Installable Languages: 1 enUS Currently Installed Language: enUS Handle 0x001E, DMI type 15, 27 bytes System Event Log Area Length: 4096 bytes Header Start Offset: 0x0000 Data Start Offset: 0x0000 Access Method: General-purpose non-volatile data functions Access Address: 0x0001 Status: Valid, Not Full Change Token: 0x0000009D Header Format: No Header Supported Log Type Descriptors: 2 Descriptor 1: POST error Data Format 1: POST results bitmap Descriptor 2: Log area reset/cleared Data Format 2: None Handle 0x001F, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: Flash Memory Error Correction Type: None Maximum Capacity: 512 kB Error Information Handle: Not Provided Number Of Devices: 1 Handle 0x0020, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 512 MB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0021, DMI type 17, 21 bytes Memory Device Array Handle: 0x001F Error Information Handle: Not Provided Total Width: 8 bits Data Width: 8 bits Size: 512 kB Form Factor: Other Set: None Locator: U11 M/B Bank Locator: Type: Flash Type Detail: Non-Volatile Handle 0x0022, DMI type 17, 21 bytes Memory Device Array Handle: 0x0020 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 256 MB Form Factor: DIMM Set: None Locator: DIMM1 M/B Bank Locator: Type: DRAM Type Detail: Synchronous Handle 0x0023, DMI type 17, 21 bytes Memory Device Array Handle: 0x0020 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 256 MB Form Factor: DIMM Set: None Locator: DIMM2 M/B Bank Locator: Type: DRAM Type Detail: Synchronous Handle 0x0024, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000007FFFF Range Size: 512 kB Physical Array Handle: 0x001F Partition Width: 1 Handle 0x0025, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Array Handle: 0x0020 Partition Width: 2 Handle 0x0026, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000007FFFF Range Size: 512 kB Physical Device Handle: 0x0021 Memory Array Mapped Address Handle: 0x0024 Partition Row Position: 1 Handle 0x0027, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000FFFFFFF Range Size: 256 MB Physical Device Handle: 0x0022 Memory Array Mapped Address Handle: 0x0025 Partition Row Position: 1 Handle 0x0028, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00010000000 Ending Address: 0x0001FFFFFFF Range Size: 256 MB Physical Device Handle: 0x0023 Memory Array Mapped Address Handle: 0x0025 Partition Row Position: 1 Handle 0x0029, DMI type 127, 4 bytes End Of Table Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-431.1.2.el6.i686 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu Dec 12 13:59:21 CST 2013 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) BIOS-e820: 000000001fef0000 - 000000001fef8000 (ACPI data) BIOS-e820: 000000001fef8000 - 000000001ff00000 (ACPI NVS) BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI 2.2 present. SMBIOS version 2.2 @ 0xF0070 DMI: NEC PC-MA80TSZTTDF7/MS-6137 , BIOS /176A0700 10/24/00 AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x1fef0 max_arch_pfn = 0x400000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 01FF00000 mask FFFF00000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. original variable MTRRs reg 0, base: 0GB, range: 512MB, type WB reg 1, base: 511MB, range: 1MB, type UC total RAM covered: 511M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 512MB, type WB reg 1, base: 511MB, range: 1MB, type UC initial memory mapped : 0 - 01000000 init_memory_mapping: 0000000000000000-000000001fef0000 Using x86 segment limits to approximate NX protection 0000000000 - 0000200000 page 4k 0000200000 - 001fe00000 page 2M 001fe00000 - 001fef0000 page 4k kernel direct mapping tables up to 1fef0000 @ 10000-19000 RAMDISK: 1efcb000 - 1fedf5ee ACPI: RSDP 000fa7b0 00014 (v00 AMI ) ACPI: RSDT 1fef0000 00028 (v01 AMIINT 00003521 MSFT 00000097) ACPI: FACP 1fef0030 00074 (v01 AMIINT 00003521 MSFT 00000097) ACPI: DSDT 1fef00b0 02470 (v01 INTEL WHITNEY 00001000 MSFT 0100000A) ACPI: FACS 1fef8000 00040 0MB HIGHMEM available. 510MB LOWMEM available. mapped low ram: 0 - 1fef0000 low ram: 0 - 1fef0000 node 0 low ram: 00000000 - 1fef0000 node 0 bootmap 00014000 - 00017fe0 (9 early reservations) ==> bootmem [0000000000 - 001fef0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0000c981d0] TEXT DATA BSS ==> [0000400000 - 0000c981d0] #4 [001efcb000 - 001fedf5ee] RAMDISK ==> [001efcb000 - 001fedf5ee] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000c99000 - 0000ca1198] BRK ==> [0000c99000 - 0000ca1198] #7 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #8 [0000014000 - 0000018000] BOOTMAP ==> [0000014000 - 0000018000] crashkernel=auto resulted in zero bytes of reserved memory. Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0001fef0 HighMem 0x0001fef0 -> 0x0001fef0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0001fef0 On node 0 totalpages: 130687 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 990 pages used for memmap Normal zone: 125714 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 SMP: Allowing 1 CPUs, 0 hotplug CPUs Local APIC disabled by BIOS -- you can enable it with "lapic" APIC: disable apic facility nr_irqs_gsi: 16 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 20000000 (gap: 20000000:dff80000) Booting paravirtualized kernel on bare hardware NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @c1600000 s36056 r0 d21288 u2097152 pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129665 Kernel command line: ro root=/dev/mapper/vg_wakame-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_wakame/lv_swap SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_wakame/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 493588k/523200k available (4504k kernel code, 28980k reserved, 2561k data, 524k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xe06f0000 - 0xff5fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdfef0000 ( 510 MB) .init : 0xc0ae7000 - 0xc0b6a000 ( 524 kB) .data : 0xc0866238 - 0xc0ae6808 (2561 kB) .text : 0xc0400000 - 0xc0866238 (4504 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:2304 nr_irqs:256 Console: colour VGA+ 80x25 console [tty0] enabled allocated 1048576 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 797.398 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 1594.79 BogoMIPS (lpj=797398) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio mce: CPU supports 5 MCE banks SMP alternatives: switching to UP code Freeing SMP alternatives: 17k freed ACPI: Core revision 20090903 ACPI: setting ELCR to 0800 (from 0e20) weird, boot CPU (#0) not listed by the BIOS. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. SMP disabled Performance Events: no APIC, boot with the "lapic" boot parameter to force-enable it. no hardware sampling interrupt available. p6 PMU driver. ... version: 0 ... bit width: 32 ... generic registers: 2 ... value mask: 00000000ffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 Brought up 1 CPUs Total of 1 processors activated (1594.79 BogoMIPS). sizeof(vma)=100 bytes sizeof(page)=32 bytes sizeof(inode)=352 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=508 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=1348 bytes devtmpfs: initialized PM: Registering ACPI NVS region at 1fef8000 (32768 bytes) regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using PIC for interrupt routing ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: Power Resource [GFAN] (off) ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x1ff00000-0xffdfffff] (ignored) PCI: root bus 00: using default resources PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] pci 0000:00:01.0: reg 10: [mem 0xe8000000-0xebffffff pref] pci 0000:00:01.0: reg 14: [mem 0xeff80000-0xefffffff] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH4 GPIO pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] pci 0000:00:1f.2: reg 20: [io 0xd800-0xd81f] pci 0000:00:1f.3: reg 20: [io 0x0540-0x054f] pci 0000:00:1f.5: reg 10: [io 0xde00-0xdeff] pci 0000:00:1f.5: reg 14: [io 0xdc00-0xdc3f] pci 0000:01:02.0: reg 10: [io 0xbc00-0xbcff] pci 0000:01:02.0: reg 14: [mem 0xefdfff00-0xefdfffff] pci 0000:01:02.0: reg 30: [mem 0xefdc0000-0xefddffff pref] pci 0000:01:02.0: supports D1 D2 pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:02.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] pci 0000:00:1e.0: bridge window [mem 0xefd00000-0xefdfffff] pci 0000:00:1e.0: bridge window [mem 0xe7b00000-0xe7bfffff pref] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUBL._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:01.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 32 bytes lo: Dropping TSO features since no CSUM feature. NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource pit pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [mem 0xffb80000-0xffbfffff] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:02: [dma 4] pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0081-0x0083] pnp 00:02: [io 0x0087] pnp 00:02: [io 0x0089-0x008b] pnp 00:02: [io 0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0071] pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x00f0-0x00ff] pnp 00:05: [irq 13] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: [irq 12] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [io 0x03f0-0x03f3] pnp 00:08: [io 0x03f4-0x03f5] pnp 00:08: [io 0x03f7] pnp 00:08: [irq 6] pnp 00:08: [dma 2] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:09: [io 0x03f8-0x03ff] pnp 00:09: [irq 4] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0a: [io 0x0378-0x037f] pnp 00:0a: [io 0x0778-0x077b] pnp 00:0a: [irq 7] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:01:02.0: address space collision: [mem 0xefdc0000-0xefddffff pref] conflicts with PCI Bus 0000:01 [mem 0xefd00000-0xefdfffff] PCI: max bus depth: 1 pci_try_num: 2 pci 0000:01:02.0: BAR 6: assigned [mem 0xe7b00000-0xe7b1ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] pci 0000:00:1e.0: bridge window [mem 0xefd00000-0xefdfffff] pci 0000:00:1e.0: bridge window [mem 0xe7b00000-0xe7bfffff pref] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] pci_bus 0000:01: resource 1 [mem 0xefd00000-0xefdfffff] pci_bus 0000:01: resource 2 [mem 0xe7b00000-0xe7bfffff pref] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 pci 0000:00:01.0: Boot video device ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered pci 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 pci 0000:00:1f.2: PCI INT D disabled Trying to unpack rootfs image as initramfs... Freeing initrd memory: 15441k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) type=2000 audit(1388134420.647:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 994 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 345CFC0C90A28E9 - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386) GHES: HEST is not enabled! isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel i810 Chipset agpgart-intel 0000:00:00.0: detected gtt size: 65536K total, 65536K mappable agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:1f.2: setting latency timer to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 9, io base 0x0000d800 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-431.1.2.el6.i686 uhci_hcd usb usb1: SerialNumber: 0000:00:1f.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver GRE over IPv4 demultiplexor driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos 00:03: setting system clock to 2013-12-27 08:53:41 UTC (1388134421) Initalizing network drop monitor service Freeing unused kernel memory: 524k freed Write protecting the kernel text: 4508k Write protecting the kernel read-only data: 1980k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 dracut: dracut-004-336.el6 dracut: rd_NO_LUKS: removing cryptoluks activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com psmouse serio1: ID: 10 00 64 Refined TSC clocksource calibration: 797.397 MHz. Switching to clocksource tsc udev: starting version 147 IBM TrackPoint firmware: 0x0b, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata2.00: ATAPI: SAMSUNG SC-140P, pg10, max UDMA/33 ata1.00: ATA-4: QUANTUM FIREBALLP KX20.5, A1S.3700, max UDMA/66 ata1.00: 40160988 sectors, multi 16: LBA ata2.00: configured for UDMA/33 ata1.00: configured for UDMA/66 scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL A1S. PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM SAMSUNG CD-ROM SC-140P pg10 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: [sda] 40160988 512-byte logical blocks: (20.5 GB/19.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk dracut: Scanning devices sda2 for LVM logical volumes vg_wakame/lv_swap vg_wakame/lv_root dracut: inactive '/dev/vg_wakame/lv_root' [17.66 GiB] inherit dracut: inactive '/dev/vg_wakame/lv_swap' [1.00 GiB] inherit EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/mapper/vg_wakame-lv_root SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1388134425.663:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root readahead-collector: starting udev: starting version 147 intel_rng: FWH not detected ACPI: resource (null) [io 0x0428-0x042f] conflicts with ACPI region PMIO [io 0x400-0x44f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver lpc_ich: Resource conflict(s) found affecting gpio_ich sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 Intel ICH 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50888 usecs (4 samples) intel8x0: measured clock 78 rejected intel8x0_measure_ac97_clock: measured 50932 usecs (2448 samples) intel8x0: clocking to 48000 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered 8139too 0000:01:02.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 eth0: RealTek RTL8139 at 0xe0aa8f00, xx:xx:xx:xx:xx:xx, IRQ 5 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS microcode: CPU0 sig=0x686, pf=0x10, revision=0x8 platform microcode: firmware: requesting intel-ucode/06-08-06 Microcode Update Driver: v2.00 , Peter Oruba parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] ppdev: user-space parallel port driver Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: Adding 1048568k swap on /dev/mapper/vg_wakame-lv_swap. Priority:-1 extents:1 across:1048568k readahead-disable-service: delaying service auditd NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 eth0: no IPv6 routers present type=1305 audit(1388134465.685:12165): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1 type=1305 audit(1388134465.685:12166): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1 readahead-collector: starting delayed service auditd readahead-collector: sorting readahead-collector: finished