processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 2600+ stepping : 0 cpu MHz : 1913.142 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow up bogomips : 3826.28 clflush size : 32 cache_alignment : 32 address sizes : 34 bits physical, 32 bits virtual power management: ts fid vid -[0000:00]-+-00.0 NVIDIA Corporation nForce2 IGP2 [10de:01e0] +-00.1 NVIDIA Corporation nForce2 Memory Controller 1 [10de:01eb] +-00.2 NVIDIA Corporation nForce2 Memory Controller 4 [10de:01ee] +-00.3 NVIDIA Corporation nForce2 Memory Controller 3 [10de:01ed] +-00.4 NVIDIA Corporation nForce2 Memory Controller 2 [10de:01ec] +-00.5 NVIDIA Corporation nForce2 Memory Controller 5 [10de:01ef] +-01.0 NVIDIA Corporation nForce2 ISA Bridge [10de:0060] +-01.1 NVIDIA Corporation nForce2 SMBus (MCP) [10de:0064] +-02.0 NVIDIA Corporation nForce2 USB Controller [10de:0067] +-02.1 NVIDIA Corporation nForce2 USB Controller [10de:0067] +-02.2 NVIDIA Corporation nForce2 USB Controller [10de:0068] +-06.0 NVIDIA Corporation nForce2 AC97 Audio Controler (MCP) [10de:006a] +-08.0-[02-07]--+-03.0 Ricoh Co Ltd RL5c476 II [1180:0476] | +-03.1 Ricoh Co Ltd RL5c476 II [1180:0476] | +-03.2 Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] | +-03.3 Ricoh Co Ltd R5C576 SD Bus Host Adapter [1180:0576] | +-03.4 Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] | +-0f.0 ADMtek 21x4x DEC-Tulip compatible 10/100 Ethernet [1317:9511] | \-0f.1 ADMtek HSP MicroModem 56 [1317:2850] +-09.0 NVIDIA Corporation nForce2 IDE [10de:0065] \-1e.0-[01]----00.0 NVIDIA Corporation NV18 [GeForce4 MX - nForce GPU] [10de:01f0] # dmidecode 2.11 SMBIOS 2.3 present. 47 structures occupying 1373 bytes. Table at 0x000F0800. Handle 0x0000, DMI type 0, 20 bytes BIOS Information Vendor: Phoenix Technologies, LTD Version: P6.00/225A1500 Release Date: 11/25/2003 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Function key-initiated network boot is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: NEC Product Name: PC-VG26N2ZGG Version: Serial Number: XXXXXXXXXXXXXXXXXXXXXXX UUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX Wake-up Type: Other Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: NEC Product Name: G1AXD Version: B Serial Number: XXXXXXXXXX Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: NEC Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: U20 Type: Central Processor Family: Athlon XP Manufacturer: AMD ID: A0 06 00 00 FF FB 83 03 Signature: Family 6, Model 10, Stepping 0 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) Version: AMD Athlon(tm) XP Voltage: 3.3 V External Clock: 166 MHz Max Speed: 3000 MHz Current Speed: 1916 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Handle 0x0005, DMI type 5, 20 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 2048 MB Supported Speeds: Other Supported Memory Types: DIMM SDRAM Memory Module Voltage: 5.0 V Associated Memory Slots: 2 0x0006 0x0007 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM1 Bank Connections: 0 1 Current Speed: 60 ns Type: DIMM SDRAM Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM2 Bank Connections: 2 3 Current Speed: 60 ns Type: DIMM SDRAM Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0008, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 kB Maximum Size: 128 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: None System Type: Other Associativity: 4-way Set-associative Handle 0x0009, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 kB Maximum Size: 512 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: Other Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: None Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: Not Specified External Connector Type: None Port Type: None Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: Not Specified External Connector Type: None Port Type: None Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: Not Specified External Connector Type: None Port Type: None Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB Internal Connector Type: None External Reference Designator: Null External Connector Type: Other Port Type: USB Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB Internal Connector Type: None External Reference Designator: Null External Connector Type: Other Port Type: USB Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB Internal Connector Type: None External Reference Designator: Null External Connector Type: Other Port Type: USB Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB Internal Connector Type: None External Reference Designator: Null External Connector Type: Other Port Type: USB Handle 0x0014, DMI type 11, 5 bytes OEM Strings String 1: PC-VG26N2EGUACGZJCAA String 2: String 3: $BIOSE0001101010110124000 String 4: String 5: Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CARDBUS Internal Connector Type: None External Reference Designator: Null External Connector Type: IEEE 1394 Port Type: Cardbus Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CARDBUS Internal Connector Type: None External Reference Designator: SD/MS External Connector Type: Other Port Type: Cardbus Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: External Connector Type: Circular DIN-8 female Port Type: Audio Port Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CDIN1 M/B Internal Connector Type: None External Reference Designator: External Connector Type: On Board Sound Input From CD-ROM Port Type: Audio Port Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: External Connector Type: DB-15 female Port Type: Video Port Handle 0x001B, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Short ID: 1 Characteristics: 3.3 V is provided PME signal is supported Handle 0x001C, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Available Length: Short ID: 2 Characteristics: 3.3 V is provided PME signal is supported Handle 0x001D, DMI type 9, 13 bytes System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: Available Length: Short ID: 3 Characteristics: 3.3 V is provided PME signal is supported Handle 0x001E, DMI type 9, 13 bytes System Slot Information Designation: PCI CARD 1 Type: 32-bit PC Card (PCMCIA) Current Usage: Unknown Length: Short ID: Adapter 1, Socket 0 Characteristics: 3.3 V is provided PME signal is supported Handle 0x001F, DMI type 9, 13 bytes System Slot Information Designation: PCI CARD 2 Type: 32-bit PC Card (PCMCIA) Current Usage: Unknown Length: Short ID: Adapter 2, Socket 0 Characteristics: 3.3 V is provided PME signal is supported Handle 0x0020, DMI type 10, 10 bytes On Board Device 1 Information Type: Video Status: Enabled Description: nForce2 Integrated Video On Board Device 2 Information Type: Sound Status: Enabled Description: AD1981B Audio On Board Device 3 Information Type: Other Status: Enabled Description: USB nVidia Handle 0x0021, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x0022, DMI type 15, 27 bytes System Event Log Area Length: 128 bytes Header Start Offset: 0x0002 Header Length: 14 bytes Data Start Offset: 0x0010 Access Method: Memory-mapped physical 32-bit address Access Address: 0xFFFFCE00 Status: Valid, Not Full Change Token: 0x00000001 Header Format: Type 1 Supported Log Type Descriptors: 2 Descriptor 1: POST error Data Format 1: POST results bitmap Descriptor 2: Log area reset/cleared Data Format 2: None Handle 0x0023, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 1 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0024, DMI type 17, 27 bytes Memory Device Array Handle: 0x0023 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: Bank0 Type: SDRAM Type Detail: Synchronous Speed: 166 MHz Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x0025, DMI type 17, 27 bytes Memory Device Array Handle: 0x0023 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM2 Bank Locator: Bank1 Type: SDRAM Type Detail: Synchronous Speed: 166 MHz Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x0026, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x0023 Partition Width: 2 Handle 0x0027, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0024 Memory Array Mapped Address Handle: 0x0026 Partition Row Position: 1 Handle 0x0028, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00040000000 Ending Address: 0x0007FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0025 Memory Array Mapped Address Handle: 0x0026 Partition Row Position: 1 Handle 0x0029, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: Flash Memory Error Correction Type: None Maximum Capacity: 512 kB Error Information Handle: Not Provided Number Of Devices: 1 Handle 0x002A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 4 bits Data Width: 4 bits Size: 512 kB Form Factor: Other Set: None Locator: U20 M/B Bank Locator: Type: Flash Type Detail: Non-Volatile Speed: 33 MHz Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x002B, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000007FFFF Range Size: 512 kB Physical Array Handle: 0x0029 Partition Width: 1 Handle 0x002C, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000007FFFF Range Size: 512 kB Physical Device Handle: 0x002A Memory Array Mapped Address Handle: 0x002B Partition Row Position: 1 Handle 0x002D, DMI type 32, 11 bytes System Boot Information Status: No errors detected Handle 0x002E, DMI type 127, 4 bytes End Of Table Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-431.1.2.el6.i686 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu Dec 12 13:59:21 CST 2013 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007dff0000 (usable) BIOS-e820: 000000007dff0000 - 000000007dff3000 (ACPI NVS) BIOS-e820: 000000007dff3000 - 000000007e000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.3 present. SMBIOS version 2.3 @ 0xF13E0 DMI: NEC PC-VG26N2ZGG/G1AXD, BIOS P6.00/225A1500 11/25/2003 Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7dff0 max_arch_pfn = 0x400000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07E000000 mask FFE000000 uncachable 2 base 0D8000000 mask FFC000000 write-combining 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01000000 init_memory_mapping: 0000000000000000-00000000375fe000 Using x86 segment limits to approximate NX protection 0000000000 - 0000200000 page 4k 0000200000 - 0037400000 page 2M 0037400000 - 00375fe000 page 4k kernel direct mapping tables up to 375fe000 @ 10000-19000 RAMDISK: 370df000 - 37fef60e Allocated new RAMDISK: 00ca2000 - 01bb260e Move RAMDISK from 00000000370df000 - 0000000037fef60d to 00ca2000 - 01bb260d ACPI: RSDP 000f7140 00014 (v00 NEC ) ACPI: RSDT 7dff3000 0002C (v01 NEC Dmodel30 00000001 AWRD 0100000E) ACPI: FACP 7dff3040 00074 (v01 NEC Dmodel30 00000001 AWRD 0100000E) ACPI: DSDT 7dff30c0 03D0F (v01 NEC DMODEL30 00000001 MSFT 0100000E) ACPI: FACS 7dff0000 00040 ACPI: APIC 7dff6e00 0006E (v01 NEC Dmodel30 00000001 AWRD 0100000E) ACPI: Local APIC address 0xfee00000 1129MB HIGHMEM available. 885MB LOWMEM available. mapped low ram: 0 - 375fe000 low ram: 0 - 375fe000 node 0 low ram: 00000000 - 375fe000 node 0 bootmap 00014000 - 0001aec0 (9 early reservations) ==> bootmem [0000000000 - 00375fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0000c981d0] TEXT DATA BSS ==> [0000400000 - 0000c981d0] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000c99000 - 0000ca11e7] BRK ==> [0000c99000 - 0000ca11e7] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #7 [0000ca2000 - 0001bb260e] NEW RAMDISK ==> [0000ca2000 - 0001bb260e] #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000] Reserving 129MB of memory at 32MB for crashkernel (System RAM: 2015MB) Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000375fe HighMem 0x000375fe -> 0x0007dff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007dff0 On node 0 totalpages: 515967 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 2260 pages used for memmap HighMem zone: 287006 pages, LIFO batch:31 Using APIC driver default Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 7e000000 (gap: 7e000000:80c00000) Booting paravirtualized kernel on bare hardware NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @cae00000 s36056 r0 d21288 u2097152 pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511935 Kernel command line: ro root=UUID=529da12b-e4c1-474d-ade2-6f9a56f65dbc rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000375fe:0007dff0) Memory: 1889252k/2064320k available (4504k kernel code, 173788k reserved, 2561k data, 524k init, 1157064k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) .init : 0xc0ae7000 - 0xc0b6a000 ( 524 kB) .data : 0xc0866238 - 0xc0ae6808 (2561 kB) .text : 0xc0400000 - 0xc0866238 (4504 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:2304 nr_irqs:256 Console: colour VGA+ 80x25 console [tty0] enabled allocated 4194304 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 1913.142 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3826.28 BogoMIPS (lpj=1913142) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio mce: CPU supports 4 MCE banks SMP alternatives: switching to UP code Freeing SMP alternatives: 17k freed ACPI: Core revision 20090903 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) XP 2600+ stepping 00 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f Brought up 1 CPUs Total of 1 processors activated (3826.28 BogoMIPS). sizeof(vma)=100 bytes sizeof(page)=32 bytes sizeof(inode)=352 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=508 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=1348 bytes devtmpfs: initialized PM: Registering ACPI NVS region at 7dff0000 (12288 bytes) regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb060, last bus=4 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cef] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x7e000000-0xfebfffff] (ignored) PCI: root bus 00: using default resources PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3ffffffff] pci 0000:00:00.0: reg 10: [mem 0xd8000000-0xdbffffff pref] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup pci 0000:00:01.1: reg 10: [io 0xe400-0xe41f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10: [mem 0xe0002000-0xe0002fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10: [mem 0xe0003000-0xe0003fff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:02.2: reg 10: [mem 0xe0004000-0xe00040ff] pci 0000:00:02.2: supports D1 D2 pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.2: PME# disabled pci 0000:00:06.0: reg 10: [io 0xd000-0xd0ff] pci 0000:00:06.0: reg 14: [io 0xd400-0xd47f] pci 0000:00:06.0: reg 18: [mem 0xe0005000-0xe0005fff] pci 0000:00:06.0: supports D1 D2 pci 0000:00:09.0: reg 20: [io 0xf000-0xf00f] pci 0000:02:03.0: proprietary Ricoh MMC controller disabled (via cardbus function) pci 0000:02:03.0: MMC cards are now supported by standard SDHCI controller pci 0000:02:03.0: reg 10: [mem 0xdd00d000-0xdd00dfff] pci 0000:02:03.0: supports D1 D2 pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:03.0: PME# disabled pci 0000:02:03.1: reg 10: [mem 0xdd004000-0xdd004fff] pci 0000:02:03.1: supports D1 D2 pci 0000:02:03.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:03.1: PME# disabled pci 0000:02:03.2: reg 10: [mem 0xdd009000-0xdd0097ff] pci 0000:02:03.2: PME# supported from D0 D3hot D3cold pci 0000:02:03.2: PME# disabled pci 0000:02:03.3: reg 10: [mem 0xdd00a000-0xdd00a0ff] pci 0000:02:03.3: supports D1 D2 pci 0000:02:03.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:03.3: PME# disabled pci 0000:02:03.4: reg 10: [mem 0xdd00b000-0xdd00b0ff] pci 0000:02:03.4: supports D1 D2 pci 0000:02:03.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:03.4: PME# disabled pci 0000:02:0f.0: reg 10: [io 0xc000-0xc0ff] pci 0000:02:0f.0: reg 14: [mem 0xdd00c000-0xdd00c3ff] pci 0000:02:0f.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:02:0f.0: supports D1 D2 pci 0000:02:0f.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:0f.0: PME# disabled pci 0000:02:0f.1: reg 10: [io 0xc400-0xc43f] pci 0000:02:0f.1: reg 14: [mem 0xdd00e000-0xdd00e1ff] pci 0000:02:0f.1: supports D1 D2 pci 0000:02:0f.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:0f.1: PME# disabled pci 0000:00:08.0: PCI bridge to [bus 02-04] pci 0000:00:08.0: bridge window [io 0xa000-0xcfff] pci 0000:00:08.0: bridge window [mem 0xdc000000-0xddffffff] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci_bus 0000:04: [bus 04-07] partially hidden behind bridge 0000:02 [bus 02-04] pci 0000:01:00.0: reg 10: [mem 0xde000000-0xdeffffff] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd3ffffff pref] pci 0000:01:00.0: reg 18: [mem 0xd4000000-0xd407ffff pref] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdfffffff] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 *4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 *4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16) ACPI: PCI Interrupt Link [APC2] (IRQs *17) ACPI: PCI Interrupt Link [APC3] (IRQs *18) ACPI: PCI Interrupt Link [APC4] (IRQs *18) ACPI: PCI Interrupt Link [APC5] (IRQs *19) ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23) ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 64 bytes, but clflush_size = 32 PCI: pci_cache_line_size set to 32 bytes lo: Dropping TSO features since no CSUM feature. NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource jiffies pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [io 0x4000-0x407f] pnp 00:00: [io 0x4080-0x40ff] pnp 00:00: [io 0x4400-0x447f] pnp 00:00: [io 0x4480-0x44ff] pnp 00:00: [io 0x4200-0x427f] pnp 00:00: [io 0x4280-0x42ff] pnp 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:01: [io 0x5000-0x503f] pnp 00:01: [io 0x5100-0x513f] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [mem 0x000d6800-0x000d7fff] pnp 00:02: [mem 0x000f0000-0x000f7fff] pnp 00:02: [mem 0x000f8000-0x000fbfff] pnp 00:02: [mem 0x000fc000-0x000fffff] pnp 00:02: [mem 0x7dff0000-0x7dffffff] pnp 00:02: [mem 0xffff0000-0xffffffff] pnp 00:02: [mem 0x00000000-0x0009ffff] pnp 00:02: [mem 0x00100000-0x7dfeffff] pnp 00:02: [mem 0xfec00000-0xfec00fff] pnp 00:02: [mem 0xfee00000-0xfee00fff] pnp 00:02: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:03: [io 0x0cf8-0x0cff] pnp 00:03: [io 0x0cf0-0x0cf7] pnp 00:03: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:04: [io 0x0010-0x001f] pnp 00:04: [io 0x0022-0x003f] pnp 00:04: [io 0x0044-0x005f] pnp 00:04: [io 0x0062-0x0063] pnp 00:04: [io 0x0065-0x006f] pnp 00:04: [io 0x0074-0x007f] pnp 00:04: [io 0x0091-0x0093] pnp 00:04: [io 0x00a2-0x00bf] pnp 00:04: [io 0x00e0-0x00ef] pnp 00:04: [io 0x04d0-0x04d1] pnp 00:04: [io 0x0800-0x087f] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:05: [dma 4] pnp 00:05: [io 0x0000-0x000f] pnp 00:05: [io 0x0080-0x0090] pnp 00:05: [io 0x0094-0x009f] pnp 00:05: [io 0x00c0-0x00df] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:06: [io 0x0070-0x0073] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0061] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:08: [io 0x00f0-0x00ff] pnp 00:08: [irq 13] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:09: [io 0x03f0-0x03f5] pnp 00:09: [io 0x03f7] pnp 00:09: [irq 6] pnp 00:09: [dma 2] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:0a: [io 0x0378-0x037f] pnp 00:0a: [irq 7] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) pnp 00:0b: [irq 12] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:0c: [io 0x0060] pnp 00:0c: [io 0x0064] pnp 00:0c: [irq 1] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:00: [io 0x4000-0x407f] has been reserved system 00:00: [io 0x4080-0x40ff] has been reserved system 00:00: [io 0x4400-0x447f] has been reserved system 00:00: [io 0x4480-0x44ff] has been reserved system 00:00: [io 0x4200-0x427f] has been reserved system 00:00: [io 0x4280-0x42ff] has been reserved system 00:01: [io 0x5000-0x503f] has been reserved system 00:01: [io 0x5100-0x513f] has been reserved system 00:02: [mem 0x000d6800-0x000d7fff] has been reserved system 00:02: [mem 0x000f0000-0x000f7fff] could not be reserved system 00:02: [mem 0x000f8000-0x000fbfff] could not be reserved system 00:02: [mem 0x000fc000-0x000fffff] could not be reserved system 00:02: [mem 0x7dff0000-0x7dffffff] could not be reserved system 00:02: [mem 0xffff0000-0xffffffff] has been reserved system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved system 00:02: [mem 0x00100000-0x7dfeffff] could not be reserved system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved system 00:04: [io 0x04d0-0x04d1] has been reserved system 00:04: [io 0x0800-0x087f] has been reserved Switching to clocksource acpi_pm PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:08.0: BAR 15: assigned [mem 0x80000000-0x89ffffff pref] pci 0000:02:03.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] pci 0000:02:03.0: BAR 16: can't assign mem (size 0x4000000) pci 0000:02:03.1: BAR 15: assigned [mem 0x84000000-0x87ffffff pref] pci 0000:02:03.1: BAR 16: can't assign mem (size 0x4000000) pci 0000:02:0f.0: BAR 6: assigned [mem 0x88000000-0x8801ffff pref] pci 0000:02:03.0: BAR 13: assigned [io 0xa000-0xa0ff] pci 0000:02:03.0: BAR 14: assigned [io 0xa400-0xa4ff] pci 0000:02:03.1: BAR 13: assigned [io 0xa800-0xa8ff] pci 0000:02:03.1: BAR 14: assigned [io 0xac00-0xacff] pci 0000:02:03.0: CardBus bridge to [bus 03-03] pci 0000:02:03.0: bridge window [io 0xa000-0xa0ff] pci 0000:02:03.0: bridge window [io 0xa400-0xa4ff] pci 0000:02:03.0: bridge window [mem 0x80000000-0x83ffffff pref] pci 0000:02:03.1: CardBus bridge to [bus 04-07] pci 0000:02:03.1: bridge window [io 0xa800-0xa8ff] pci 0000:02:03.1: bridge window [io 0xac00-0xacff] pci 0000:02:03.1: bridge window [mem 0x84000000-0x87ffffff pref] pci 0000:00:08.0: PCI bridge to [bus 02-04] pci 0000:00:08.0: PCI bridge to [bus 02-04] pci 0000:00:08.0: bridge window [io 0xa000-0xcfff] pci 0000:00:08.0: bridge window [mem 0xdc000000-0xddffffff] pci 0000:00:08.0: bridge window [mem 0x80000000-0x89ffffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xd4080000-0xd409ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdfffffff] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff pref] pci 0000:00:08.0: setting latency timer to 64 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:02:03.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:02:03.1: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3ffffffff] pci_bus 0000:02: resource 0 [io 0xa000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xddffffff] pci_bus 0000:02: resource 2 [mem 0x80000000-0x89ffffff pref] pci_bus 0000:03: resource 0 [io 0xa000-0xa0ff] pci_bus 0000:03: resource 1 [io 0xa400-0xa4ff] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref] pci_bus 0000:04: resource 0 [io 0xa800-0xa8ff] pci_bus 0000:04: resource 1 [io 0xac00-0xacff] pci_bus 0000:04: resource 2 [mem 0x84000000-0x87ffffff pref] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdfffffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, high) -> IRQ 22 pci 0000:00:02.0: PCI INT A disabled ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 pci 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 21 (level, high) -> IRQ 21 pci 0000:00:02.1: PCI INT B disabled ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 pci 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 20 (level, high) -> IRQ 20 pci 0000:00:02.2: PCI INT C disabled pci 0000:01:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 15425k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) type=2000 audit(1388315917.656:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1461 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 345CFC0C90A28E9 - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386) GHES: HEST is not enabled! isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart: Detected NVIDIA nForce2 chipset agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xd8000000 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial 0000:02:0f.1: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 20 (level, high) -> IRQ 20 ehci_hcd 0000:00:02.2: setting latency timer to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: debug port 1 ehci_hcd 0000:00:02.2: cache line size of 32 is not supported ehci_hcd 0000:00:02.2: irq 20, io mem 0xe0004000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-431.1.2.el6.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:02.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xe0002000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-431.1.2.el6.i686 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 21 (level, high) -> IRQ 21 ohci_hcd 0000:00:02.1: setting latency timer to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 21, io mem 0xe0003000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-431.1.2.el6.i686 ohci_hcd usb usb3: SerialNumber: 0000:00:02.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver GRE over IPv4 demultiplexor driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: Trying ACPI perflib powernow: ACPI perflib can not be used on this platform powernow: ACPI and legacy methods failed Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos 00:06: setting system clock to 2013-12-29 11:18:38 UTC (1388315918) Initalizing network drop monitor service Freeing unused kernel memory: 524k freed Write protecting the kernel text: 4508k Write protecting the kernel read-only data: 1980k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 dracut: dracut-004-336.el6 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com udev: starting version 147 ACPI: WMI: Mapper loaded psmouse serio1: ID: 10 00 64 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [APC5] enabled at IRQ 19 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 nouveau 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 19 (level, high) -> IRQ 19 nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x01f000a5 nouveau [ DEVICE][0000:01:00.0] Chipset: nForce2 (NV1F) nouveau [ DEVICE][0000:01:00.0] Family : NV10 nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... nouveau [ VBIOS][0000:01:00.0] ... checksum invalid nouveau [ VBIOS][0000:01:00.0] checking PROM for image... nouveau [ VBIOS][0000:01:00.0] ... signature not found nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... nouveau [ VBIOS][0000:01:00.0] ... signature not found nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image... nouveau [ VBIOS][0000:01:00.0] ... appears to be valid nouveau [ VBIOS][0000:01:00.0] using image from PCIROM nouveau [ VBIOS][0000:01:00.0] BMP version 5.15 nouveau [ VBIOS][0000:01:00.0] version 04.1f.00.09.00 nouveau W[ VBIOS][0000:01:00.0] unknown i2c type 3 nouveau W[ VBIOS][0000:01:00.0] unknown i2c type 3 nouveau W[ PTIMER][0000:01:00.0] unknown input clock freq nouveau [ PFB][0000:01:00.0] RAM type: stolen system memory nouveau [ PFB][0000:01:00.0] RAM size: 32 MiB nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags Refined TSC clocksource calibration: 1913.183 MHz. Switching to clocksource tsc agpgart-nvidia 0000:00:00.0: AGP 2.0 bridge agpgart-nvidia 0000:00:00.0: putting AGP V2 device into 4x mode nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [TTM] Zone kernel: Available graphics memory: 374494 kiB [TTM] Zone highmem: Available graphics memory: 953026 kiB [TTM] Initializing pool allocator nouveau [ DRM] VRAM: 31 MiB nouveau [ DRM] GART: 64 MiB nouveau [ DRM] BMP version 5.21 nouveau [ DRM] DCB version 2.0 nouveau [ DRM] DCB outp 00: 02000330 00007530 nouveau [ DRM] DCB outp 01: 01100332 00000010 nouveau [ DRM] DCB outp 03: 02010231 00000703 nouveau [ DRM] DCB outp 04: 01120132 00000010 nouveau [ DRM] DCB outp 05: 01120232 00000010 nouveau [ DRM] Merging DCB entries 1 and 3 nouveau [ DRM] Merging DCB entries 1 and 4 Slow work thread pool: Starting up Slow work thread pool: Ready nouveau [ DRM] Saving VGA fonts nouveau [ I2C][0000:01:00.0] detected TMDS transmitter: sil164 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. nouveau W[ DRM] Unknown memclock table version 0. nouveau [ DRM] 0 available performance level(s) nouveau [ DRM] c: core 200MHz memory 167045M nouveau [ DRM] MM: using M2MF for buffer copies nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2) nouveau [ DRM] Load detected on output B nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo f6634800 fbcon: nouveaufb (fb0) is primary device [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10] fbcon_init: detected unhandled fb_set_par error, error code -22 [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10] Console: switching to colour frame buffer device 90x36 [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device nouveau 0000:01:00.0: registered panic notifier [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0 dracut: Starting plymouth daemon [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10] IBM TrackPoint firmware: 0x0b, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10] pata_amd 0000:00:09.0: version 0.4.1 pata_amd 0000:00:09.0: setting latency timer to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata1.00: ATA-6: SAMSUNG SV6004H, PY100-11, max UDMA/100 ata1.00: 117306000 sectors, multi 16: LBA ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA SAMSUNG SV6004H PY10 PQ: 0 ANSI: 5 ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A112, max UDMA/66 ata2: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc600c000) ACPI=0x701f (60:600:0x13) ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4040B A112 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: [sda] 117306000 512-byte logical blocks: (60.0 GB/55.9 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk yenta_cardbus 0000:02:03.0: CardBus bridge found [1033:820d] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x0000, PCI irq 16 yenta_cardbus 0000:02:03.0: Socket status: 30000006 yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge window: [io 0xa000-0xcfff] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xcfff: clean. yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge window: [mem 0xdc000000-0xddffffff] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x89ffffff pref] yenta_cardbus 0000:02:03.1: CardBus bridge found [1033:820d] yenta_cardbus 0000:02:03.1: ISA IRQ mask 0x0000, PCI irq 17 yenta_cardbus 0000:02:03.1: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07 yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge window: [io 0xa000-0xcfff] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa000-0xcfff: clean. yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge window: [mem 0xdc000000-0xddffffff] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge window: [mem 0x80000000-0x89ffffff pref] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 firewire_ohci 0000:02:03.2: PCI INT C -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18 firewire_ohci: Added fw-ohci device 0000:02:03.2, OHCI version 1.0 firewire_core: created device fw0: GUID 00004ce033016218, S400 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/sda1 SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1388315922.578:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root readahead-collector: starting udev: starting version 147 i2c i2c-2: nForce2 SMBus adapter at 0x5000 i2c i2c-3: nForce2 SMBus adapter at 0x5100 [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, high) -> IRQ 22 Intel ICH 0000:00:06.0: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50921 usecs (2368 samples) intel8x0: clocking to 49545 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 18 r592 0000:02:03.4: PCI INT D -> Link[APC4] -> GSI 18 (level, high) -> IRQ 18 r592 0000:02:03.4: setting latency timer to 64 r592: driver succesfully loaded Linux Tulip driver version 1.1.15 (Feb 27, 2007) tulip 0000:02:0f.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1. eth0: ADMtek Comet rev 1 at MMIO 0xdd00c000, xx:xx:xx:xx:xx:xx, IRQ 17. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: CPU0: AMD CPU family 0x6 not supported Microcode Update Driver: v2.00 , Peter Oruba parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] ppdev: user-space parallel port driver Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Adding 1022968k swap on /dev/sda2. Priority:-1 extents:1 across:1022968k readahead-disable-service: delaying service auditd NET: Registered protocol family 10 lo: Disabled Privacy Extensions 0000:02:0f.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0x172002) eth0: Setting full-duplex based on MII#1 link partner capability of cde1. RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. eth0: no IPv6 routers present type=1305 audit(1388315953.981:14881): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1 type=1305 audit(1388315953.981:14882): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1 readahead-collector: starting delayed service auditd readahead-collector: sorting readahead-collector: finished