processor : 0 vendor_id : GenuineIntel cpu family : 5 model : 4 model name : Pentium MMX stepping : 3 cpu MHz : 199.920 cache size : 0 KB fdiv_bug : no hlt_bug : no f00f_bug : yes coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr mce cx8 mmx bogomips : 399.84 clflush size : 32 cache_alignment : 32 address sizes : 32 bits physical, 32 bits virtual power management: -[0000:00]-+-00.0 VIA Technologies, Inc. VT82C595/97 [Apollo VP2/97] [1106:1595] +-0d.0 S3 Inc. 86c375 [ViRGE/DX] or 86c385 [ViRGE/GX] [5333:8a01] +-10.0 Compaq Computer Corporation Netelligent 10/100 TX Embedded UTP [0e11:b011] +-14.0 VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] [1106:0586] +-14.1 VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] +-14.2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] \-14.3 VIA Technologies, Inc. VT82C586B ACPI [1106:3040] /proc/interrupts CPU0 0: 18292 XT-PIC-XT-PIC timer 1: 8 XT-PIC-XT-PIC i8042 2: 0 XT-PIC-XT-PIC cascade 5: 1 XT-PIC-XT-PIC ES18xx 6: 3 XT-PIC-XT-PIC floppy 7: 1 XT-PIC-XT-PIC parport0 8: 0 XT-PIC-XT-PIC rtc0 9: 0 XT-PIC-XT-PIC acpi 11: 472 XT-PIC-XT-PIC uhci_hcd:usb1, eth0 12: 4 XT-PIC-XT-PIC i8042 14: 1801 XT-PIC-XT-PIC pata_via 15: 93 XT-PIC-XT-PIC pata_via NMI: 0 Non-maskable interrupts LOC: 0 Local timer interrupts SPU: 0 Spurious interrupts PMI: 0 Performance monitoring interrupts IWI: 0 IRQ work interrupts ERR: 0 MIS: 0 /proc/ioports 0000-0cf7 : PCI Bus 0000:00 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0071 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 015c-015d : pnp 00:0b 0170-0177 : 0000:00:14.1 0170-0177 : pata_via 01f0-01f7 : 0000:00:14.1 01f0-01f7 : pata_via 0213-0213 : ISAPnP 0220-022f : ES18xx 02f8-02ff : serial 0330-0331 : MPU401 UART 0376-0376 : 0000:00:14.1 0376-0376 : pata_via 0378-037a : parport0 037b-037f : parport0 0388-0389 : OPL2/3 (left) 038a-038b : OPL2/3 (right) 03c0-03df : vga+ 03f2-03f2 : floppy 03f4-03f5 : floppy 03f6-03f6 : 0000:00:14.1 03f6-03f6 : pata_via 03f7-03f7 : floppy 03f8-03ff : serial 04d0-04d1 : pnp 00:0b 077e-077f : pnp 00:0b 0800-0807 : ES18xx - CTRL 0a79-0a79 : isapnp write 0c06-0c07 : pnp 00:0b 0c50-0c51 : pnp 00:0b 0c70-0c77 : pnp 00:0b 0c70-0c73 : ACPI PM1b_EVT_BLK 0c82-0c82 : pnp 00:0b 0cf8-0cff : PCI conf1 0d00-ffff : PCI Bus 0000:00 1000-101f : 0000:00:14.2 1000-101f : uhci_hcd 1020-102f : 0000:00:10.0 1020-102f : TLAN 1030-103f : 0000:00:14.1 1030-103f : pata_via fc00-fc1f : pnp 00:0c fc00-fc03 : ACPI PM1a_EVT_BLK fc04-fc05 : ACPI PM1a_CNT_BLK fc08-fc0b : ACPI PM_TMR fc10-fc15 : ACPI CPU throttle fc20-fc3f : pnp 00:0c fc20-fc23 : ACPI GPE0_BLK fc2e-fc2f : ACPI PM1b_CNT_BLK fc40-fc5f : pnp 00:0c fc40-fc45 : vt586b_smbus fc60-fc7f : pnp 00:0c fc80-fc9f : pnp 00:0c fca0-fcbf : pnp 00:0c fcc0-fcdf : pnp 00:0c fce0-fcff : pnp 00:0c /proc/asound/cards 0 [ES1868 ]: ES1868 - ESS AudioDrive ES1868 ESS AudioDrive ES1868 at 0x220, irq 5, dma1 1, dma2 0 # dmidecode 2.11 # No SMBIOS nor DMI entry point found, sorry. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-486 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.65-1+deb7u1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable) [ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI not present or invalid. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288 [ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0010000000 page 2M [ 0.000000] kernel direct mapping tables up to 10000000 @ 17f9000-1800000 [ 0.000000] RAMDISK: 0eeca000 - 0f867000 [ 0.000000] ACPI: RSDP 000e0010 00014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 000e0080 00038 (v01 COMPAQ CPQAE70 19990803 00000000) [ 0.000000] ACPI: FACP 000e00cc 00074 (v01 COMPAQ CAPONE 00000001 00000000) [ 0.000000] ACPI: DSDT 000e0140 00961 (v01 COMPAQ DSDT 00000001 MSFT 01000004) [ 0.000000] ACPI: FACS 000e0040 00040 [ 0.000000] ACPI: SSDT 000e0aa1 00C77 (v01 COMPAQ VILLTBL1 00000001 MSFT 01000004) [ 0.000000] ACPI: SSDT 000e1b7e 0016F (v01 COMPAQ COMM2 00000001 MSFT 01000004) [ 0.000000] ACPI: SSDT 000e181e 00360 (v01 COMPAQ PNP_PRSS 00000001 MSFT 01000004) [ 0.000000] ACPI: SSDT 000e1dfd 000EE (v01 COMPAQ COM2_PNP 00000001 MSFT 01000004) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 256MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 10000000 [ 0.000000] low ram: 0 - 10000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00010000 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00010000 [ 0.000000] On node 0 totalpages: 65423 [ 0.000000] free_area_init_node: node 0, pgdat c13c7b28, node_mem_map cfdff200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 60960 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xfc08 [ 0.000000] No local APIC present or hardware disabled [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:effe0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64911 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-486 root=UUID=ecc885aa-4060-46ef-80f0-3e15d11a00e4 ro quiet [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 244672k/262144k available (2602k kernel code, 17020k reserved, 1295k data, 456k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] .init : 0xc13cf000 - 0xc1441000 ( 456 kB) [ 0.000000] .data : 0xc128aaac - 0xc13ce780 (1295 kB) [ 0.000000] .text : 0xc1000000 - 0xc128aaac (2602 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=ce806000 soft=ce808000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 199.920 MHz processor. [ 0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 399.84 BogoMIPS (lpj=799680) [ 0.004086] pid_max: default: 32768 minimum: 301 [ 0.005205] Security Framework initialized [ 0.005273] AppArmor: AppArmor disabled by boot time parameter [ 0.005501] Mount-cache hash table entries: 512 [ 0.009284] Initializing cgroup subsys cpuacct [ 0.009356] Initializing cgroup subsys memory [ 0.009789] Initializing cgroup subsys devices [ 0.009829] Initializing cgroup subsys freezer [ 0.009866] Initializing cgroup subsys net_cls [ 0.009902] Initializing cgroup subsys blkio [ 0.010219] Initializing cgroup subsys perf_event [ 0.010822] Intel Pentium with F0 0F bug - workaround enabled. [ 0.011251] CPU: Intel Pentium MMX stepping 03 [ 0.014141] ACPI: Core revision 20110623 [ 0.032416] ACPI: setting ELCR to 0200 (from 0800) [ 0.036898] Performance Events: no PMU driver, software events only. [ 0.044316] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.047924] devtmpfs: initialized [ 0.056599] print_constraints: dummy: [ 0.058672] NET: Registered protocol family 16 [ 0.066076] EISA bus registered [ 0.068247] ACPI: bus type pci registered [ 0.071526] PCI: PCI BIOS revision 2.10 entry at 0xee1f7, last bus=0 [ 0.071564] PCI: Using configuration type 1 for base access [ 0.123421] bio: create slab at 0 [ 0.126292] ACPI: Added _OSI(Module Device) [ 0.126342] ACPI: Added _OSI(Processor Device) [ 0.126386] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.126432] ACPI: Added _OSI(Processor Aggregator Device) [ 0.129970] ACPI: EC: Look up EC in DSDT [ 0.151283] ACPI: Interpreter enabled [ 0.151324] ACPI: (supports S0 S1 S4 S5) [ 0.151622] ACPI: Using PIC for interrupt routing [ 0.205847] ACPI: No dock devices found. [ 0.205885] HEST: Table not found. [ 0.205927] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.207817] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.212317] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.212369] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.212418] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.212466] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] [ 0.212514] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xfffbffff] [ 0.212890] pci 0000:00:00.0: [1106:1595] type 0 class 0x000600 [ 0.213367] pci 0000:00:0d.0: [5333:8a01] type 0 class 0x000300 [ 0.213440] pci 0000:00:0d.0: reg 10: [mem 0x40000000-0x43ffffff] [ 0.213546] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.213919] pci 0000:00:10.0: [0e11:b011] type 0 class 0x000280 [ 0.213985] pci 0000:00:10.0: reg 10: [io 0x1020-0x102f] [ 0.214041] pci 0000:00:10.0: reg 14: [mem 0x44000000-0x4400000f] [ 0.214135] pci 0000:00:10.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.214523] pci 0000:00:14.0: [1106:0586] type 0 class 0x000601 [ 0.214971] pci 0000:00:14.1: [1106:0571] type 0 class 0x000101 [ 0.215078] pci 0000:00:14.1: reg 20: [io 0x1030-0x103f] [ 0.215493] pci 0000:00:14.2: [1106:3038] type 0 class 0x000c03 [ 0.215600] pci 0000:00:14.2: reg 20: [io 0x1000-0x101f] [ 0.215989] pci 0000:00:14.3: [1106:3040] type 0 class 0x000000 [ 0.216233] pci_bus 0000:00: on NUMA node 0 [ 0.216294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.217556] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.232624] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11) [ 0.233550] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.234460] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.235376] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11) [ 0.236419] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 6 7 10 *11) [ 0.240184] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.240254] vgaarb: loaded [ 0.240279] vgaarb: bridge control possible 0000:00:0d.0 [ 0.244381] PCI: Using ACPI for IRQ routing [ 0.244424] PCI: pci_cache_line_size set to 32 bytes [ 0.244620] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.248814] Switching to clocksource pit [ 0.289923] pnp: PnP ACPI init [ 0.290242] ACPI: bus type pnp registered [ 0.293798] pnp 00:00: [bus 00-ff] [ 0.293852] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.293899] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.293948] pnp 00:00: [io 0x0d00-0xffff window] [ 0.293997] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.294047] pnp 00:00: [mem 0x000c8000-0x000dffff window] [ 0.294098] pnp 00:00: [mem 0x10000000-0xfffbffff window] [ 0.295331] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.295683] pnp 00:01: [io 0x00f0-0x00ff] [ 0.295741] pnp 00:01: [irq 13] [ 0.296851] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.297166] pnp 00:02: [io 0x0000-0x000f] [ 0.297216] pnp 00:02: [io 0x0080-0x008f] [ 0.297261] pnp 00:02: [io 0x00c0-0x00df] [ 0.297306] pnp 00:02: [dma 4] [ 0.298371] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.298637] pnp 00:03: [io 0x0070-0x0071] [ 0.298690] pnp 00:03: [irq 8] [ 0.300073] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.300328] pnp 00:04: [io 0x0061] [ 0.301429] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.301689] pnp 00:05: [irq 12] [ 0.302980] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.303359] pnp 00:06: [io 0x0060] [ 0.303406] pnp 00:06: [io 0x0064] [ 0.303454] pnp 00:06: [irq 1] [ 0.304717] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.308585] pnp 00:07: [irq 7] [ 0.308632] pnp 00:07: [dma 3] [ 0.308676] pnp 00:07: [io 0x0378-0x037f] [ 0.308723] pnp 00:07: [io 0x0778-0x077d] [ 0.311064] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.313315] pnp 00:08: [irq 4] [ 0.313365] pnp 00:08: [io 0x03f8-0x03ff] [ 0.315574] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.318021] pnp 00:09: [irq 6] [ 0.318068] pnp 00:09: [dma 2] [ 0.318113] pnp 00:09: [io 0x03f0-0x03f5] [ 0.319493] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.321663] pnp 00:0a: [irq 3] [ 0.321713] pnp 00:0a: [io 0x02f8-0x02ff] [ 0.323616] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.323936] pnp 00:0b: [io 0x0010-0x001f] [ 0.323986] pnp 00:0b: [io 0x0072-0x0075] [ 0.324031] pnp 00:0b: [io 0x0076-0x0077] [ 0.324075] pnp 00:0b: [io 0x0078-0x007f] [ 0.324120] pnp 00:0b: [io 0x0090-0x009f] [ 0.324165] pnp 00:0b: [io 0x015c-0x015d] [ 0.324208] pnp 00:0b: [io 0x04d0-0x04d1] [ 0.324252] pnp 00:0b: [io 0x077e-0x077f] [ 0.324295] pnp 00:0b: [io 0x0c06-0x0c07] [ 0.324339] pnp 00:0b: [io 0x0c50-0x0c51] [ 0.324382] pnp 00:0b: [io 0x0c70-0x0c77] [ 0.324425] pnp 00:0b: [io 0x0c82] [ 0.325719] system 00:0b: [io 0x015c-0x015d] has been reserved [ 0.325777] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.325830] system 00:0b: [io 0x077e-0x077f] has been reserved [ 0.325883] system 00:0b: [io 0x0c06-0x0c07] has been reserved [ 0.325934] system 00:0b: [io 0x0c50-0x0c51] has been reserved [ 0.325986] system 00:0b: [io 0x0c70-0x0c77] has been reserved [ 0.326036] system 00:0b: [io 0x0c82] has been reserved [ 0.326092] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.326398] pnp 00:0c: [io 0xfc00-0xfc1f] [ 0.326446] pnp 00:0c: [io 0xfc20-0xfc3f] [ 0.326491] pnp 00:0c: [io 0xfc40-0xfc5f] [ 0.326535] pnp 00:0c: [io 0xfc60-0xfc7f] [ 0.326580] pnp 00:0c: [io 0xfc80-0xfc9f] [ 0.326624] pnp 00:0c: [io 0xfca0-0xfcbf] [ 0.326669] pnp 00:0c: [io 0xfcc0-0xfcdf] [ 0.326713] pnp 00:0c: [io 0xfce0-0xfcff] [ 0.328167] system 00:0c: [io 0xfc00-0xfc1f] has been reserved [ 0.328225] system 00:0c: [io 0xfc20-0xfc3f] has been reserved [ 0.328277] system 00:0c: [io 0xfc40-0xfc5f] has been reserved [ 0.328329] system 00:0c: [io 0xfc60-0xfc7f] has been reserved [ 0.328381] system 00:0c: [io 0xfc80-0xfc9f] has been reserved [ 0.328431] system 00:0c: [io 0xfca0-0xfcbf] has been reserved [ 0.328482] system 00:0c: [io 0xfcc0-0xfcdf] has been reserved [ 0.328533] system 00:0c: [io 0xfce0-0xfcff] has been reserved [ 0.328594] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.330149] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.330204] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.330252] pnp 00:0d: [mem 0x00100000-0x0fffffff] [ 0.330300] pnp 00:0d: [mem 0xfffc0000-0xffffffff] [ 0.331680] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.331741] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.331794] system 00:0d: [mem 0x00100000-0x0fffffff] could not be reserved [ 0.331848] system 00:0d: [mem 0xfffc0000-0xffffffff] could not be reserved [ 0.331908] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.332013] pnp: PnP ACPI: found 14 devices [ 0.332044] ACPI: ACPI bus type pnp unregistered [ 0.332080] PnPBIOS: Disabled by ACPI PNP [ 0.464436] Switching to clocksource acpi_pm [ 0.464543] PCI: max bus depth: 0 pci_try_num: 1 [ 0.464648] pci 0000:00:0d.0: BAR 6: assigned [mem 0x10000000-0x1000ffff pref] [ 0.464712] pci 0000:00:10.0: BAR 6: assigned [mem 0x10010000-0x1001ffff pref] [ 0.464767] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.464810] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.464853] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.464898] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff] [ 0.464943] pci_bus 0000:00: resource 8 [mem 0x10000000-0xfffbffff] [ 0.466525] NET: Registered protocol family 2 [ 0.517559] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.522503] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.524663] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.525707] TCP: Hash tables configured (established 8192 bind 8192) [ 0.525743] TCP reno registered [ 0.525788] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.525978] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.527862] NET: Registered protocol family 1 [ 0.528183] pci 0000:00:0d.0: Boot video device [ 0.528255] pci 0000:00:14.0: Activating ISA DMA hang workarounds [ 0.529949] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 11 [ 0.529990] PCI: setting IRQ 11 as level-triggered [ 0.530101] PCI: CLS 32 bytes, default 32 [ 0.530843] Unpacking initramfs... [ 9.939586] Freeing initrd memory: 9844k freed [ 10.292210] audit: initializing netlink socket (disabled) [ 10.292422] type=2000 audit(1424692514.288:1): initialized [ 10.478561] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 10.481095] VFS: Disk quotas dquot_6.5.2 [ 10.481472] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.483091] msgmni has been set to 497 [ 10.486626] alg: No test for stdrng (krng) [ 10.487623] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 10.487674] io scheduler noop registered [ 10.487704] io scheduler deadline registered [ 10.487870] io scheduler cfq registered (default) [ 10.493117] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.494954] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 10.494996] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 10.500488] ERST: Table is not found! [ 10.500520] GHES: HEST is not enabled! [ 10.500799] isapnp: Scanning for PnP cards... [ 10.632387] 01:01: card 'ESS ES1868 Plug and Play AudioDrive' [ 10.632428] isapnp: 1 Plug & Play card detected total [ 10.634167] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 10.656550] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.658134] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 10.685825] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.688540] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 10.694408] Linux agpgart interface v0.103 [ 10.705472] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 10.708897] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.708993] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 10.714479] mousedev: PS/2 mouse device common for all mice [ 10.715998] rtc_cmos 00:03: RTC can wake from S4 [ 10.718093] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 10.718246] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 10.720873] EISA: Probing bus 0 at eisa.0 [ 10.721034] EISA: Cannot allocate resource for mainboard [ 10.721191] Cannot allocate resource for EISA slot 1 [ 10.721343] Cannot allocate resource for EISA slot 2 [ 10.721494] Cannot allocate resource for EISA slot 3 [ 10.721645] Cannot allocate resource for EISA slot 4 [ 10.721796] Cannot allocate resource for EISA slot 5 [ 10.721946] Cannot allocate resource for EISA slot 6 [ 10.722098] Cannot allocate resource for EISA slot 7 [ 10.722249] Cannot allocate resource for EISA slot 8 [ 10.722281] EISA: Detected 0 cards. [ 10.722314] cpuidle: using governor ladder [ 10.722346] cpuidle: using governor menu [ 10.725671] TCP cubic registered [ 10.726135] NET: Registered protocol family 10 [ 10.735863] Mobile IPv6 [ 10.735907] NET: Registered protocol family 17 [ 10.736002] Registering the dns_resolver key type [ 10.736259] Using IPI Shortcut mode [ 10.740255] PM: Hibernation image not present or could not be loaded. [ 10.740427] registered taskstats version 1 [ 10.741700] rtc_cmos 00:03: setting system clock to 2015-02-23 11:55:15 UTC (1424692515) [ 10.742487] Initializing network drop monitor service [ 10.745521] Freeing unused kernel memory: 456k freed [ 10.760980] Write protecting the kernel text: 2604k [ 10.761280] Write protecting the kernel read-only data: 1032k [ 10.780580] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 11.006177] udevd[42]: starting version 175 [ 11.288237] Refined TSC clocksource calibration: 199.903 MHz. [ 11.288307] Switching to clocksource tsc [ 11.748527] tlan: ThunderLAN driver v1.17 [ 11.750369] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 11.866956] tlan 0000:00:10.0: eth0: irq=11, io=1020, Compaq Netelligent 10/100 TX Embedded UTP, Rev. 16 [ 11.867858] tlan: 1 device installed, PCI: 1 EISA: 0 [ 12.497774] thermal LNXTHERM:00: registered as thermal_zone0 [ 12.497820] ACPI: Thermal Zone [THRM] (25 C) [ 12.817075] Floppy drive(s): fd0 is 1.44M [ 12.834339] FDC 0 is a National Semiconductor PC87306 [ 13.082955] SCSI subsystem initialized [ 13.211157] usbcore: registered new interface driver usbfs [ 13.224292] usbcore: registered new interface driver hub [ 13.225607] usbcore: registered new device driver usb [ 13.337252] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.383330] uhci_hcd: USB Universal Host Controller Interface driver [ 13.383955] uhci_hcd 0000:00:14.2: UHCI Host Controller [ 13.408519] uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1 [ 13.408853] uhci_hcd 0000:00:14.2: irq 11, io base 0x00001000 [ 13.410438] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 13.410489] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.410532] usb usb1: Product: UHCI Host Controller [ 13.410567] usb usb1: Manufacturer: Linux 3.2.0-4-486 uhci_hcd [ 13.410605] usb usb1: SerialNumber: 0000:00:14.2 [ 13.419244] hub 1-0:1.0: USB hub found [ 13.419400] hub 1-0:1.0: 2 ports detected [ 13.754404] libata version 3.00 loaded. [ 13.793447] pata_via 0000:00:14.1: version 0.3.4 [ 13.880269] scsi0 : pata_via [ 13.891131] scsi1 : pata_via [ 13.893564] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1030 irq 14 [ 13.893617] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1038 irq 15 [ 14.068726] ata1.00: ATA-4: ST33221A, 3.04, max UDMA/33 [ 14.068781] ata1.00: 6303024 sectors, multi 8: LBA [ 14.084547] ata1.00: configured for UDMA/33 [ 14.086847] scsi 0:0:0:0: Direct-Access ATA ST33221A 3.04 PQ: 0 ANSI: 5 [ 14.268554] ata2.00: ATAPI: HITACHI CDR-8230, 0014, max MWDMA2 [ 14.284487] ata2.00: configured for MWDMA2 [ 14.293491] scsi 1:0:0:0: CD-ROM HITACHI CDR-8230 0014 PQ: 0 ANSI: 5 [ 14.513501] sd 0:0:0:0: [sda] 6303024 512-byte logical blocks: (3.22 GB/3.00 GiB) [ 14.515230] sd 0:0:0:0: [sda] Write Protect is off [ 14.515281] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.515997] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.540248] sr0: scsi3-mmc drive: 8x/20x cd/rw xa/form2 cdda caddy [ 14.540299] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 14.549825] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 14.578061] sda: sda1 sda2 sda3 [ 14.591850] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.691314] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.700619] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 16.256352] microcode: CPU0 not a capable Intel processor [ 16.268288] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 16.566601] PM: Starting manual resume from disk [ 16.566652] PM: Hibernation image partition 8:2 present [ 16.566681] PM: Looking for hibernation image. [ 16.588697] PM: Image not found (code -22) [ 16.588734] PM: Hibernation image not present or could not be loaded. [ 17.119096] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 23.230005] udevd[282]: starting version 175 [ 24.778424] Marking TSC unstable due to TSC halts in idle [ 24.778545] ACPI: acpi_idle registered with cpuidle [ 24.785528] Switching to clocksource acpi_pm [ 24.927595] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 24.927686] ACPI: Power Button [PBTN] [ 26.112639] parport_pc 00:07: reported by Plug and Play ACPI [ 26.112868] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 26.602466] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 27.892171] Error: Driver 'pcspkr' is already registered, aborting... [ 33.792645] Adding 115708k swap on /dev/sda2. Priority:-1 extents:1 across:115708k [ 34.084681] EXT4-fs (sda1): re-mounted. Opts: (null) [ 35.142652] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 36.374057] loop: module loaded [ 37.754571] es18xx 01:01.00: [io 0x0800-0x0807] [ 37.756890] es18xx 01:01.00: activated [ 37.784267] es18xx 01:01.01: [dma 1] [ 37.784328] es18xx 01:01.01: [dma 0] [ 37.784615] es18xx 01:01.01: [irq 5] [ 37.784697] es18xx 01:01.01: [io 0x0220-0x022f] [ 37.784770] es18xx 01:01.01: [io 0x0388-0x038b] [ 37.784840] es18xx 01:01.01: [io 0x0330-0x0331] [ 37.787222] es18xx 01:01.01: activated [ 54.164763] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 54.227382] tlan 0000:00:10.0: eth0: Starting autonegotiation [ 56.230306] tlan 0000:00:10.0: eth0: Autonegotiation complete [ 56.331465] tlan 0000:00:10.0: eth0: Link active [ 56.331913] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 66.408146] eth0: no IPv6 routers present