processor : 0 cpu : 405EX clock : 600.000000MHz revision : 20.127 (pvr 1291 147f) bogomips : 1196.03 timebase : 600000000 platform : OpenBlockS 600 model : PlatHome,OpenBlockS 600 Memory : 1024 MB Using OpenBlockS 600 machine description Linux version 2.6.29 (root@obs600-official) (gcc version 4.2.3) #1 Wed Aug 27 12:17:53 JST 2014 Found initrd at 0xcfdfc000:0xcfe62b1f Found legacy serial port 0 for /plb/opb/serial@ef600200 mem=ef600200, taddr=ef600200, irq=0, clk=7407407, speed=0 Found legacy serial port 1 for /plb/opb/serial@ef600300 mem=ef600300, taddr=ef600300, irq=0, clk=7407407, speed=0 Top of RAM: 0x40000000, Total RAM: 0x40000000 Memory hole size: 0MB Zone PFN ranges: DMA 0x00000000 -> 0x00020000 Normal 0x00020000 -> 0x00020000 HighMem 0x00020000 -> 0x00040000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00040000 On node 0 totalpages: 262144 free_area_init_node: node 0, pgdat c039dbe0, node_mem_map c0628000 DMA zone: 1024 pages used for memmap DMA zone: 0 pages reserved DMA zone: 130048 pages, LIFO batch:31 HighMem zone: 1024 pages used for memmap HighMem zone: 130048 pages, LIFO batch:31 MMU: Allocated 1088 bytes of context maps for 255 contexts Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 Kernel command line: ramdisk_size=8192 root=LABEL=/ rootdelay=15 console=ttyS0,115200 UIC0 (32 IRQ sources) at DCR 0xc0 UIC1 (32 IRQ sources) at DCR 0xd0 UIC2 (32 IRQ sources) at DCR 0xe0 PID hash table entries: 2048 (order: 11, 8192 bytes) time_init: decrementer frequency = 600.000000 MHz time_init: processor frequency = 600.000000 MHz clocksource: timebase mult[6aaaab] shift[22] registered clockevent: decrementer mult[9999] shift[16] cpu[0] Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) High memory: 524288k Memory: 1034500k/1048576k available (3560k kernel code, 12896k reserved, 148k data, 102k bss, 140k init) Calibrating delay loop... 1196.03 BogoMIPS (lpj=2392064) Mount-cache hash table entries: 512 net_namespace: 988 bytes NET: Registered protocol family 16 bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 410k freed setup_kcore: restrict size=3fffffff audit: initializing netlink socket (disabled) type=2000 audit(0.604:1): initialized highmem bounce pool size: 64 pages Registering unionfs 2.5.7 (for xxx.xxx.xxx.xxx) msgmni has been set to 999 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered OBS600 LED driver v0.2 Push switch driver v0.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xef600200 (irq = 26) is a 16550A console [ttyS0] enabled serial8250.0: ttyS1 at MMIO 0xef600300 (irq = 16) is a 16550A brd: module loaded PPC 4xx OCP EMAC driver, version 3.54 MAL v2 /plb/mcmal, 2 TX channels, 2 RX channels RGMII /plb/opb/emac-rgmii@ef600b00 initialized with MDIO support /plb/opb/emac-rgmii@ef600b00: input 0 in RGMII mode eth0 (emac): not using net_device_ops yet eth0: EMAC-0 /plb/opb/ethernet@ef600900, MAC xx:xx:xx:xx:xx:xx eth0: found Generic MII PHY (0x02) /plb/opb/emac-rgmii@ef600b00: input 1 in RGMII mode eth1 (emac): not using net_device_ops yet eth1: EMAC-1 /plb/opb/ethernet@ef600a00, MAC xx:xx:xx:xx:xx:xx eth1: found Generic MII PHY (0x03) Driver 'sd' needs updating - please use bus_type methods f8000000.nor_flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 f8000000.nor_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available Creating 7 MTD partitions on "f8000000.nor_flash": 0x000000000000-0x000003de0000 : "kernel + initrd" 0x000003de0000-0x000003e60000 : "user config area" 0x000003e60000-0x000007e60000 : "user program area" 0x000007e60000-0x000007ee0000 : "flat device tree" 0x000007ee0000-0x000007f60000 : "test program" 0x000007f60000-0x000007fa0000 : "u-boot env" 0x000007fa0000-0x000008000000 : "u-boot" Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. dwc_otg: version 2.60a 22-NOV-2006 dwc_otg: Shared Tx FIFO mode dwc_otg: Using DMA mode dwc_otg dwc_otg.0: DWC OTG Controller dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1 dwc_otg dwc_otg.0: irq 17, io mem 0x00000000 dwc_otg: Init: Port Power? op_state=1 dwc_otg: Init: Power Port (0) usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: DWC OTG Controller usb usb1: Manufacturer: Linux 2.6.29 dwc_otg_hcd usb usb1: SerialNumber: dwc_otg.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected mice: PS/2 mouse device common for all mice i2c /dev entries driver ibm-iic ef600400.i2c: using standard (100 kHz) mode ibm-iic ef600500.i2c: using standard (100 kHz) mode DS1340: I2C based RTC driver. DS1340: found DS1340 on IBM IIC Netfilter messages via NETLINK v0.30. NET: Registered protocol family 17 registered taskstats version 1 Waiting 15sec before mounting root device... usb 1-1: new high speed USB device using dwc_otg and address 2 usb 1-1: New USB device found, idVendor=0424, idProduct=2514 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-1.1: new high speed USB device using dwc_otg and address 3 usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0702 usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1.1: Product: USB Storage usb 1-1.1: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning scsi 0:0:0:0: Direct-Access TRANSCEN D 0014 PQ: 0 ANSI: 0 sd 0:0:0:0: [sda] 1993824 512-byte hardware sectors: (1.02 GB/973 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] 1993824 512-byte hardware sectors: (1.02 GB/973 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk usb-storage: device scan complete RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) on device 1:0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:1. Trying to move old root to /initrd ... /initrd does not exist. Ignored. Unmounting old root Trying to free ramdisk memory ... okay [prepare_namespace] Executing flashcfg... [prepare_namespace] Finished executing flashcfg Freeing unused kernel memory: 140k init EXT3 FS on sda1, internal journal Adding 99544k swap on /dev/sda2. Priority:-1 extents:1 across:99544k 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller eth0: link is up, 1000 FDX, pause enabled eth1: link is down NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready eth0: no IPv6 routers present RPC: Registered udp transport module. RPC: Registered tcp transport module.