IP27 PROM SGI Version 6.156 built 11:27:56 AM Nov 18, 2003 Testing/Initializing memory ............... DONE Copying PROM code to memory ............... DONE Discovering local IO ...................... Found an io Board with nic 030-0948-003. Found an io Board with nic 030-1305-001. DONE Discovering NUMAlink connectivity ......... DONE Found 6 objects (4 hubs, 2 routers) in 66463 usec Waiting for peers to complete discovery.... DONE Recognized 390 MHz midplane Global master is /hw/module/1/slot/n1 Testing/Initializing all memory ........... DONE Checking partitioning information ......... DONE Loading BASEIO prom ....................... DONE BASEIO PROM Monitor SGI Version 6.156 built 11:26:28 AM Nov 18, 2003 (BE64) 8 CPUs on 4 nodes found. Installing PROM Device drivers ............ Base I/O Ethernet set to /dev/ethernet/ef0 Walking SCSI Adapter 0 (/hw/module/1/slot/io1), (pci id 0) 1+ 2- 3- 4- 5- 6+ 7- 8- 9- 10- 11- 12- 13- 14- 15- = 2 device(s) Walking SCSI Adapter 1 (/hw/module/1/slot/io1), (pci id 1) 1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s) Initializing PROM Device drivers .......... DONE Checking hardware inventory ............... DONE **** System Configuration and Diagnostics Summary **** CONFIG: No. of NODEs enabled = 4 No. of NODEs disabled = 0 No. of CPUs enabled = 8 No. of CPUs disabled = 0 Mem enabled = 2048 MB Mem disabled = 0 MB No. of RTRs enabled = 2 No. of RTRs disabled = 0 DIAG RESULTS: ALL DIAGS PASSED. **** End System Configuration and Diagnostics Summary **** System Maintenance Menu 1) Start System 2) Install System Software 3) Run Diagnostics 4) Recover System 5) Enter Command Monitor Option? 1 Starting up the system... IRIX Release 6.5 IP27 Version 07202013 System V - 64 Bit Copyright 1987-2006 Silicon Graphics, Inc. All Rights Reserved. Setting rbaud to 19200 NOTICE: Starting failsoftd The system is coming up.   Starting new eventmond... No System change detected. inst: inst: Software installation has installed new configuration files and/or saved inst: the previous version in some cases. You may need to update or merge inst: old configuration files with the newer versions. See the "Updating inst: Configuration Files" section in the versions(1M) manual page for details. inst: The shell command "versions changed" will list the affected files. inst: inst: These directories were unable to be moved properly during the inst: installation process. Check for any user-modified files, then inst: delete the directories. inst: /usr/include/Vk.O nekogumo console login: root IRIX Release 6.5 IP27 nekogumo Copyright 1987-2006 Silicon Graphics, Inc. All Rights Reserved. Last login: Fri Mar 8 13:51:19 JST 2013 by UNKNOWN@172.16.88.254 TERM = (vt100) nekogumo 1# hinv -vvm Location: /hw/module/1/slot/n1/node MODULEID Board: barcode K0021792 part rev Group ff Capability ffffffff Variety ff Laser 00000056f803 8P12_MPLN Board: barcode JEE587 part 030-0762-006 rev M Group ff Capability ffffffff Variety ff Laser 000000345006 IP31PIMM Board: barcode HXE888 part 030-1313-002 rev A Group ff Capability ffffffff Variety ff Laser 000000344a5e IP31 Board: barcode HXP154 part 030-1255-003 rev D Group ff Capability ffffffff Variety ff Laser 00000033cc3b Location: /hw/module/1/slot/n2/node IP31PIMM Board: barcode JEG840 part 030-1313-002 rev A Group ff Capability ffffffff Variety ff Laser 00000032a13c IP31 Board: barcode JHF097 part 030-1255-003 rev D Group ff Capability ffffffff Variety ff Laser 0000003c40ad Location: /hw/module/1/slot/n3/node IP31PIMM Board: barcode FXZ252 part 030-1313-002 rev A Group ff Capability ffffffff Variety ff Laser 00000033cffc IP31 Board: barcode JEA513 part 030-1255-003 rev D Group ff Capability ffffffff Variety ff Laser 00000033ec13 Location: /hw/module/1/slot/n4/node IP31 Board: barcode JEA250 part 030-1255-003 rev D Group ff Capability ffffffff Variety ff Laser 00000033eb26 IP31PIMM Board: barcode FXZ063 part 030-1313-002 rev A Group ff Capability ffffffff Variety ff Laser 000000343677 Location: /hw/module/1/slot/r1/router ROUTER_IR1 Board: barcode HKH858 part 030-0841-003 rev B Group ff Capability ffffffff Variety ff Laser 000000322d79 Location: /hw/module/1/slot/r2/router ROUTER_IR1 Board: barcode HKH550 part 030-0841-003 rev B Group ff Capability ffffffff Variety ff Laser 00000031d5f0 Location: /hw/module/1/slot/io4/quad_atm QUAD_ATM Board: barcode HLN918 part 030-0948-003 rev E Group ff Capability ffffffff Variety ff Laser 0000002e2e6e Location: /hw/module/1/slot/io2/divo DIVO Board: barcode JHH112 part 030-1305-001 rev E Group ff Capability ffffffff Variety ff Laser 00000034a3f4 Location: /hw/module/1/slot/io12/divo DIVO Board: barcode JHH121 part 030-1305-001 rev E Group ff Capability ffffffff Variety ff Laser 00000034a89a Location: /hw/module/1/slot/io11/divo DIVO Board: barcode JHA463 part 030-1305-001 rev E Group ff Capability ffffffff Variety ff Laser 0000003475d4 Location: /hw/module/1/slot/io1/baseio MIO Board: barcode HKZ701 part 030-0880-003 rev G Group ff Capability ffffffff Variety ff Laser 00000039228c BASEIO Board: barcode HRC656 part 030-0734-002 rev N Group ff Capability ffffffff Variety ff Laser 00000039137f Location: /hw/module/1/slot/io7/mscsi MSCSI Board: barcode HPY619 part 030-1243-001 rev M Group ff Capability ffffffff Variety ff Laser 00000031c437 Location: /hw/module/1/slot/io9/xtalk_pci XTALK_PCI Board: barcode MNZ923 part 030-1275-004 rev B Group 11 Capability ffffffff Variety ff Laser 00000059bea1 8 250 MHZ IP27 Processors CPU: MIPS R10000 Processor Chip Revision: 3.4 FPU: MIPS R10010 Floating Point Chip Revision: 3.4 Location: /hw/module/1/slot/n1/node/cpubus/0/a CPU 0 at Module 1/Slot 1/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 Location: /hw/module/1/slot/n1/node/cpubus/0/b CPU 1 at Module 1/Slot 1/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 Location: /hw/module/1/slot/n2/node/cpubus/0/a CPU 2 at Module 1/Slot 2/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 Location: /hw/module/1/slot/n2/node/cpubus/0/b CPU 3 at Module 1/Slot 2/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 Location: /hw/module/1/slot/n3/node/cpubus/0/a CPU 4 at Module 1/Slot 3/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 Location: /hw/module/1/slot/n3/node/cpubus/0/b CPU 5 at Module 1/Slot 3/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 Location: /hw/module/1/slot/n4/node/cpubus/0/a CPU 6 at Module 1/Slot 4/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 Location: /hw/module/1/slot/n4/node/cpubus/0/b CPU 7 at Module 1/Slot 4/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 Main memory size: 2048 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 4 Mbytes Location: /hw/module/1/slot/n1/node/memory Memory at Module 1/Slot 1: 512 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Location: /hw/module/1/slot/n2/node/memory Memory at Module 1/Slot 2: 512 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Location: /hw/module/1/slot/n3/node/memory Memory at Module 1/Slot 3: 512 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Location: /hw/module/1/slot/n4/node/memory Memory at Module 1/Slot 4: 512 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Location: /hw/module/1/slot/r1/router ROUTER in Module 1/Slot 2: Revision 2: Active Ports [4,5,6] (enabled) Location: /hw/module/1/slot/r2/router ROUTER in Module 1/Slot 4: Revision 2: Active Ports [4,5,6] (enabled) Integral SCSI controller 2: Version QL1040B (rev. 2), differential Integral SCSI controller 3: Version QL1040B (rev. 2), differential Integral SCSI controller 4: Version QL1040B (rev. 2), differential Integral SCSI controller 5: Version QL1040B (rev. 2), differential Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) CDROM: unit 6 on SCSI controller 0 Integral SCSI controller 1: Version QL1040B (rev. 2), single ended IOC3/IOC4 serial port: tty1 IOC3/IOC4 serial port: tty2 IOC3/IOC4 serial port: tty3 IOC3/IOC4 serial port: tty4 IOC3 parallel port: plp1 Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Gigabit Ethernet: eg0, module 1, XIO slot io9, firmware version 0.0.0 Iris Audio Processor: version RAD revision 7.0, number 1 PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0 PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 1 Origin BASEIO board, module 1 slot 1: Revision 4 PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0 PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2 PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0 PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0 PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2 PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2 Origin MSCSI board, module 1 slot 7: Revision 4 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7 PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 1 IOC3/IOC4 external interrupts: 1 Location: /hw/module/1/slot/n1/node/hub HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled) Location: /hw/module/1/slot/n2/node/hub HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled) Location: /hw/module/1/slot/n3/node/hub HUB in Module 1/Slot 3: Revision 5 Speed 100.00 Mhz (enabled) Location: /hw/module/1/slot/n4/node/hub HUB in Module 1/Slot 4: Revision 5 Speed 100.00 Mhz (enabled) Location: /hw/module/1/slot/n1/node/prom IP27prom in Module 1/Slot n1: Revision 6.156 Location: /hw/module/1/slot/n2/node/prom IP27prom in Module 1/Slot n2: Revision 6.156 Location: /hw/module/1/slot/n3/node/prom IP27prom in Module 1/Slot n3: Revision 6.156 Location: /hw/module/1/slot/n4/node/prom IP27prom in Module 1/Slot n4: Revision 6.156 Location: /hw/module/1/slot/io1/baseio IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156 nekogumo 2#