cpu : Alpha cpu model : EV56 cpu variation : 7 cpu revision : 0 cpu serial number : system type : Miata system variation : 0 system revision : 0 system serial number : cycle frequency [Hz] : 599795451 est. timer frequency [Hz] : 1024.00 page size [bytes] : 8192 phys. address bits : 40 max. addr. space # : 127 BogoMIPS : 1191.08 kernel unaligned acc : 0 (pc=0,va=0) user unaligned acc : 0 (pc=0,va=0) platform string : Digital Personal WorkStation 600au cpus detected : 1 L1 Icache : 8K, 1-way, 32b line L1 Dcache : 8K, 1-way, 32b line L2 cache : 96K, 3-way, 64b line L3 cache : 2048K, 1-way, 64b line -[0000:00]-+-03.0 Digital Equipment Corporation DECchip 21142/43 [1011:0019] +-04.0 Silicon Image, Inc. PCI0646 [1095:0646] +-07.0 Intel Corporation 82378ZB/IB, 82379AB (SIO, SIO.A) PCI to ISA Bridge [8086:0484] +-0c.0-[0000:01]--+-04.0 Cirrus Logic GD 5430/40 [Alpine] [1013:00a0] | \-05.0 Intergraph Corporation Device [1091:00eb] \-14.0-[0000:02]----09.0 QLogic Corp. ISP1020 Fast-wide SCSI [1077:1020] 1: 623 XT-PIC i8042 2: 0 XT-PIC cascade 8: 350403 RTC +timer 12: 170 XT-PIC i8042 14: 74 XT-PIC ide0 15: 0 XT-PIC ide1 18: 0 PYXIS halt-switch 22: 0 PYXIS timer-cascade 23: 0 PYXIS isa-cascade 24: 7581 PYXIS eth0 40: 21169 PYXIS qla1280 ERR: 0 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-0080 : rtc 00a0-00bf : pic2 00c0-00df : dma2 0170-0177 : 0000:00:04.0 0170-0177 : CMD646 01f0-01f7 : 0000:00:04.0 01f0-01f7 : CMD646 02f8-02ff : serial 0376-0376 : 0000:00:04.0 0376-0376 : CMD646 03c0-03df : vga+ 03f6-03f6 : 0000:00:04.0 03f6-03f6 : CMD646 03f8-03ff : serial 8000-8fff : PCI Bus 0000:02 8000-80ff : 0000:02:09.0 9000-907f : 0000:00:03.0 9000-907f : tulip 9080-908f : 0000:00:04.0 9080-908f : CMD646 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-alpha-generic (Debian 2.6.26-29) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sun Mar 4 21:08:03 UTC 2012 [ 0.000000] Booting GENERIC on Miata using machine vector Miata from SRM [ 0.000000] Major Options: MAGIC_SYSRQ [ 0.000000] Command line: ro root=/dev/sda3 [ 0.000000] memcluster 0, usage 1, start 0, end 248 [ 0.000000] memcluster 1, usage 0, start 248, end 131071 [ 0.000000] memcluster 2, usage 1, start 131071, end 131072 [ 0.000000] freeing pages 248:2048 [ 0.000000] freeing pages 2987:131071 [ 0.000000] reserving pages 2987:2989 [ 0.000000] Initial ramdisk at: 0xfffffc003f62c000 (9240829 bytes) [ 0.000000] 2048K Bcache detected; load hit latency 35 cycles, load miss latency 145 cycles [ 0.000000] pci: cia revision 1 (pyxis) [ 0.000000] On node 0 totalpages: 131071 [ 0.000000] DMA zone: 896 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 130175 pages, LIFO batch:15 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130175 [ 0.000000] Kernel command line: ro root=/dev/sda3 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] HWRPB cycle frequency bogus. Estimated 599795451 Hz [ 0.000000] Using epoch = 2000 [4194001.855599] Console: colour VGA+ 80x25 [4194001.855599] console [tty0] enabled [4194001.862435] Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes) [4194001.868294] Inode-cache hash table entries: 65536 (order: 6, 524288 bytes) [4194001.970833] Memory: 1020624k/1048568k available (2162k kernel code, 25336k reserved, 3314k data, 304k init) [4194001.970833] Calibrating delay loop... 1191.08 BogoMIPS (lpj=581632) [4194001.992318] Security Framework initialized [4194001.992318] Capability LSM initialized [4194001.992318] Mount-cache hash table entries: 512 [4194001.993294] Initializing cgroup subsys ns [4194001.993294] Initializing cgroup subsys cpuacct [4194001.993294] Initializing cgroup subsys devices [4194002.004037] net_namespace: 1208 bytes [4194002.005013] NET: Registered protocol family 16 [4194002.006966] EISA bus registered [4194002.007943] pci: passed tb register update test [4194002.007943] pci: passed sg loopback i/o read test [4194002.007943] pci: passed pte write cache snoop test [4194002.007943] pci: failed valid tag invalid pte reload test (mcheck; workaround available) [4194002.007943] pci: passed pci machine check test [4194002.007943] pci: tbia workaround enabled [4194002.008919] pci: enabling save/restore of SRM state [4194002.013802] PCI: Bridge: 0000:00:0c.0 [4194002.013802] IO window: disabled. [4194002.013802] MEM window: 0x0b000000-0x0b0fffff [4194002.013802] PREFETCH window: 0x0000000009000000-0x000000000affffff [4194002.013802] PCI: Bridge: 0000:00:14.0 [4194002.013802] IO window: 8000-8fff [4194002.013802] MEM window: 0x0b100000-0x0b1fffff [4194002.013802] PREFETCH window: 0x000000000b200000-0x000000000b2fffff [4194002.018685] Linux Plug and Play Support v0.97 (c) Adam Belay [4194002.028451] NET: Registered protocol family 2 [4194002.038216] IP route cache hash table entries: 8192 (order: 3, 65536 bytes) [4194002.039193] TCP established hash table entries: 32768 (order: 6, 524288 bytes) [4194002.041146] TCP bind hash table entries: 32768 (order: 5, 262144 bytes) [4194002.043099] TCP: Hash tables configured (established 32768 bind 32768) [4194002.043099] TCP reno registered [4194002.046029] NET: Registered protocol family 1 [4194002.047005] checking if image is initramfs... it is [4194007.519659] Freeing initrd memory: 9024k freed [4194007.522588] VFS: Disk quotas dquot_6.5.1 [4194007.522588] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) [4194007.522588] msgmni has been set to 2012 [4194007.524542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [4194007.524542] io scheduler noop registered [4194007.524542] io scheduler anticipatory registered [4194007.524542] io scheduler deadline registered [4194007.524542] io scheduler cfq registered (default) [4194007.524542] isapnp: Scanning for PnP cards... [4194007.879034] isapnp: No Plug & Play device found [4194007.897588] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [4194007.898565] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4194007.898565] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [4194007.910284] brd: module loaded [4194007.918096] serio: i8042 KBD port at 0x60,0x64 irq 1 [4194007.919073] serio: i8042 AUX port at 0x60,0x64 irq 12 [4194007.920049] mice: PS/2 mouse device common for all mice [4194007.921026] EISA: Probing bus 0 at eisa.0 [4194007.922979] TCP cubic registered [4194007.922979] NET: Registered protocol family 17 [4194007.923955] registered taskstats version 1 [4194007.924932] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [4194007.924932] Freeing unused kernel memory: 304k freed [4194008.421025] input: AT Translated Set 2 keyboard as /class/input/input0 [4194019.632934] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) [4194019.637817] tulip0: EEPROM default media type Autosense. [4194019.637817] tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. [4194019.637817] tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. [4194019.637817] tulip0: Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block. [4194019.637817] tulip0: Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block. [4194019.637817] tulip0: Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block. [4194019.642699] tulip0: MII transceiver #5 config 0000 status 784b advertising 01e1. [4194019.647582] eth0: Digital DS21142/43 Tulip rev 48 at Port 0x9000, xx:xx:xx:xx:xx:xx, IRQ 24. [4194019.822387] Uniform Multi-Platform E-IDE driver [4194019.822387] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4194019.961059] CMD646: IDE controller (0x1095:0x0646 rev 0x01) at PCI slot 0000:00:04.0 [4194019.961059] CMD646: not 100% native mode: will probe irqs later [4194019.961059] CMD646: MultiWord DMA limited, IRQ workaround enabled [4194019.961059] ide0: BM-DMA at 0x9080-0x9087 [4194019.961059] ide1: BM-DMA at 0x9088-0x908f [4194019.962035] Probing IDE interface ide0... [4194021.010863] SCSI subsystem initialized [4194021.188597] hda: TOSHIBA CD-ROM XM-6102B, ATAPI CD/DVD-ROM drive [4194021.657347] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO3 [4194021.657347] hda: MWDMA2 mode selected [4194021.657347] Probing IDE interface ide1... [4194022.360471] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4194022.360471] ide1 at 0x170-0x177,0x376 on irq 15 [4194022.365354] qla1280: QLA1040 found on PCI bus 2, dev 9 [4194023.256955] scsi(0:0): Resetting SCSI BUS [4194026.260860] scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter [4194026.260860] Firmware version: 7.65.06, Driver version 3.26 [4194026.380001] libata version 3.00 loaded. [4194026.381954] scsi 0:0:0:0: Direct-Access SEAGATE ST373307LW 0007 PQ: 0 ANSI: 3 [4194026.386837] scsi(0:0:0:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31 [4194026.726680] hda: ATAPI 24X CD-ROM drive, 256kB Cache [4194026.726680] Uniform CD-ROM driver Revision: 3.20 [4194027.172969] scsi 0:0:5:0: Sequential-Access DEC TLZ09 (C)DEC 03a5 PQ: 0 ANSI: 2 [4194027.175899] scsi(0:0:5:0): Sync: period 10, offset 12 [4194027.332149] scsi: waiting for bus probes to complete ... [4194029.172968] Driver 'sd' needs updating - please use bus_type methods [4194029.175898] sd 0:0:0:0: [sda] 143374744 512-byte hardware sectors (73408 MB) [4194029.176874] sd 0:0:0:0: [sda] Write Protect is off [4194029.176874] sd 0:0:0:0: [sda] Mode Sense: ab 00 10 08 [4194029.179804] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [4194029.180780] sd 0:0:0:0: [sda] 143374744 512-byte hardware sectors (73408 MB) [4194029.182734] sd 0:0:0:0: [sda] Write Protect is off [4194029.182734] sd 0:0:0:0: [sda] Mode Sense: ab 00 10 08 [4194029.253046] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [4194029.253046] sda: sda1 sda2 sda3 sda4 [4194029.265741] sd 0:0:0:0: [sda] Attached SCSI disk [4194029.546015] st: Version 20080224, fixed bufsize 32768, s/g segs 256 [4194029.546015] Driver 'st' needs updating - please use bus_type methods [4194029.547968] st 0:0:5:0: Attached scsi tape st0 [4194029.547968] st 0:0:5:0: st0: try direct i/o: yes (alignment 4 B) [4194029.572382] osst :I: Tape driver with OnStream support version 0.99.4 [4194029.572382] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [4194029.572382] Driver 'osst' needs updating - please use bus_type methods [4194031.935662] kjournald starting. Commit interval 5 seconds [4194031.935662] EXT3-fs: mounted filesystem with ordered data mode. [4194034.119254] udevd version 125 started [4194053.273542] input: PC Speaker as /class/input/input1 [4194053.929791] IBM TrackPoint firmware: 0x0b, buttons: 3/3 [4194053.943463] input: TPPS/2 IBM TrackPoint as /class/input/input2 [4194057.138774] Adding 2461768k swap on /dev/sda4. Priority:-1 extents:1 across:2461768k [4194057.644633] EXT3 FS on sda3, internal journal [4194058.590922] loop: module loaded [4194065.041114] eth0: Setting full-duplex based on MII#5 link partner capability of c5e1. [4194174.869182] NET: Registered protocol family 10 [4194174.871136] lo: Disabled Privacy Extensions [4194185.641638] eth0: no IPv6 routers present [4194581.764482] warning: `ntpd' uses 32-bit capabilities (legacy support in use)