processor : 0 cpu : PPC970MP, altivec supported clock : 2500.000000MHz revision : 1.1 (pvr 0044 0101) processor : 1 cpu : PPC970MP, altivec supported clock : 2500.000000MHz revision : 1.1 (pvr 0044 0101) processor : 2 cpu : PPC970MP, altivec supported clock : 2500.000000MHz revision : 1.1 (pvr 0044 0101) processor : 3 cpu : PPC970MP, altivec supported clock : 2500.000000MHz revision : 1.1 (pvr 0044 0101) timebase : 33333333 platform : PowerMac model : PowerMac11,2 machine : PowerMac11,2 motherboard : PowerMac11,2 MacRISC4 Power Macintosh detected as : 337 (PowerMac G5 Dual Core) pmac flags : 00000000 L2 cache : 1024K unified pmac-generation : NewWorld -+-[0001:00]-+-00.0 Apple Inc. U4 HT Bridge [106b:0074] | +-01.0-[04]-- | +-02.0-[05]--+-04.0 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet [14e4:166a] | | \-04.1 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet [14e4:166a] | +-03.0-[06]-- | +-04.0-[07]-- | +-05.0-[08]-- | +-06.0-[09]-- | +-07.0-[02]-- | +-08.0-[01]--+-07.0 Apple Inc. Shasta Mac I/O [106b:004f] | | +-0b.0 NEC Corporation USB [1033:0035] | | +-0b.1 NEC Corporation USB [1033:0035] | | \-0b.2 NEC Corporation USB 2.0 [1033:00e0] | \-09.0-[03]--+-0c.0 Broadcom K2 SATA [1166:0240] | +-0d.0 Apple Inc. Shasta IDE [106b:0050] | \-0e.0 Apple Inc. Shasta Firewire [106b:0052] \-[0000:00]---0b.0-[0a]----00.0 NVIDIA Corporation NV43 [GeForce 6600] [10de:0141] [ 0.000000] Allocated 20480 bytes for 32 pacas at c00000000fffb000 [ 0.000000] DART table allocated at: c00000007f000000 [ 0.000000] Using PowerMac machine description [ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24 [ 0.000000] Found initrd at 0xc000000001700000:0xc000000002210000 [ 0.000000] Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42 [ 0.000000] Mapped at 0xd000080080000000 [ 0.000000] Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000 [ 0.000000] PowerMac motherboard: PowerMac G5 Dual Core [ 0.000000] DART IOMMU initialized for U4 type chipset [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] Freed 16384 bytes for unused pacas [ 0.000000] Starting Linux PPC64 #1 SMP Debian 3.2.54-2 [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] physicalMemorySize = 0x200000000 [ 0.000000] htab_address = 0xc000000278000000 [ 0.000000] htab_hash_mask = 0xfffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-powerpc64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2 [ 0.000000] [boot]0012 Setup Arch [ 0.000000] Top of RAM: 0x280000000, Total RAM: 0x200000000 [ 0.000000] Memory hole size: 2048MB [ 0.000000] Found U4-PCIE PCI host bridge. Firmware bus number: 0->255 [ 0.000000] PCI host bridge /pci@0,f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges: [ 0.000000] SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp. [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=306, gen1=307 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00280000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00080000 [ 0.000000] 0: 0x00100000 -> 0x00280000 [ 0.000000] On node 0 totalpages: 2097152 [ 0.000000] DMA zone: 35840 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 2061312 pages, LIFO batch:31 [ 0.000000] [boot]0015 Setup Done [ 0.000000] PERCPU: Embedded 13 pages/cpu @c000000000b00000 s20608 r0 d32640 u262144 [ 0.000000] pcpu-alloc: s20608 r0 d32640 u262144 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2061312 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] freeing bootmem node 0 [ 0.000000] Memory: 8087640k/8388608k available (7052k kernel code, 300968k reserved, 1300k data, 1922k bss, 432k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:512 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 4 CPUs [ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 124 sources [ 0.000000] mpic: Setting up HT PICs workarounds for U3/U4 [ 0.000000] mpic: - HT:01.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:02.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:03.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:04.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:05.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:06.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs [ 0.000000] time_init: decrementer frequency = 33.333333 MHz [ 0.000000] time_init: processor frequency = 2500.000000 MHz [ 0.000000] clocksource: timebase mult[7800001] shift[22] registered [ 0.000000] clockevent: decrementer mult[8888887] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.001412] pid_max: default: 32768 minimum: 301 [ 0.001592] Security Framework initialized [ 0.001602] AppArmor: AppArmor disabled by boot time parameter [ 0.002714] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.009212] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012233] Mount-cache hash table entries: 256 [ 0.014177] device-tree: Duplicate name in /ht@0,f2000000/pci@8/mac-io@7/i2c@18000, renamed to "i2c-bus@0#1" [ 0.015821] Initializing cgroup subsys cpuacct [ 0.015839] Initializing cgroup subsys memory [ 0.016142] Initializing cgroup subsys devices [ 0.016148] Initializing cgroup subsys freezer [ 0.016154] Initializing cgroup subsys net_cls [ 0.016161] Initializing cgroup subsys blkio [ 0.016177] Initializing cgroup subsys perf_event [ 0.016620] PowerMac SMP probe found 4 cpus [ 0.016728] KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000 [ 0.016737] channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1 [ 0.016762] KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000 [ 0.016771] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0 [ 0.016779] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0 [ 0.016794] SMU i2c /smu@0,0/smu-i2c-control@0 [ 0.016803] channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b [ 0.016812] channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e [ 0.016837] Processor timebase sync using platform function [ 0.016845] mpic: requesting IPIs... [ 0.016870] PPC970/FX/MP performance monitor hardware support registered [ 0.024669] Brought up 4 CPUs [ 0.025455] devtmpfs: initialized [ 0.040023] print_constraints: dummy: [ 0.040223] NET: Registered protocol family 16 [ 0.040243] IBM eBus Device Driver [ 0.040615] CPU Hotplug not supported by firmware - disabling. [ 0.043572] PCI: Probing PCI hardware [ 0.043762] pci 0000:00:0b.0: [106b:005b] type 1 class 0x000604 [ 0.043795] PCI: Fixup U4 PCIe bridge range: [mem 0x90000000-0xafffffff] [ 0.043835] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.078170] IOMMU table initialized, virtual merging enabled [ 0.078229] pci 0000:0a:00.0: [10de:0141] type 0 class 0x000300 [ 0.078244] pci 0000:0a:00.0: reg 10: [mem 0xa1000000-0xa1ffffff] [ 0.078259] pci 0000:0a:00.0: reg 14: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.078273] pci 0000:0a:00.0: reg 1c: [mem 0xa0000000-0xa0ffffff 64bit] [ 0.078290] pci 0000:0a:00.0: reg 30: [mem 0xa2000000-0xa201ffff pref] [ 0.078353] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.078371] pci 0000:00:0b.0: PCI bridge to [bus 0a-0a] [ 0.078383] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xafffffff] [ 0.078679] pci 0001:00:00.0: [106b:0074] type 0 class 0x000600 [ 0.078718] pci 0001:00:01.0: [1166:0130] type 1 class 0x000604 [ 0.078785] pci 0001:00:02.0: [1166:0130] type 1 class 0x000604 [ 0.078845] pci 0001:00:03.0: [1166:0132] type 1 class 0x000604 [ 0.078903] pci 0001:00:04.0: [1166:0132] type 1 class 0x000604 [ 0.078962] pci 0001:00:05.0: [1166:0132] type 1 class 0x000604 [ 0.079021] pci 0001:00:06.0: [1166:0132] type 1 class 0x000604 [ 0.079082] pci 0001:00:07.0: [106b:0053] type 1 class 0x000604 [ 0.079164] pci 0001:00:08.0: [106b:0054] type 1 class 0x000604 [ 0.079232] pci 0001:00:09.0: [106b:0055] type 1 class 0x000604 [ 0.079344] pci 0001:00:01.0: PCI bridge to [bus 04-04] [ 0.079393] pci 0001:05:04.0: [14e4:166a] type 0 class 0x000200 [ 0.079409] pci 0001:05:04.0: reg 10: [mem 0xfa530000-0xfa53ffff 64bit] [ 0.079420] pci 0001:05:04.0: reg 18: [mem 0xfa520000-0xfa52ffff 64bit] [ 0.079469] pci 0001:05:04.0: PME# supported from D3hot D3cold [ 0.079498] pci 0001:05:04.1: [14e4:166a] type 0 class 0x000200 [ 0.079514] pci 0001:05:04.1: reg 10: [mem 0xfa510000-0xfa51ffff 64bit] [ 0.079525] pci 0001:05:04.1: reg 18: [mem 0xfa500000-0xfa50ffff 64bit] [ 0.079574] pci 0001:05:04.1: PME# supported from D3hot D3cold [ 0.079599] pci 0001:00:02.0: PCI bridge to [bus 05-05] [ 0.079610] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff] [ 0.079657] pci 0001:00:03.0: PCI bridge to [bus 06-06] [ 0.079693] pci 0001:00:04.0: PCI bridge to [bus 07-07] [ 0.079735] pci 0001:00:05.0: PCI bridge to [bus 08-08] [ 0.079771] pci 0001:00:06.0: PCI bridge to [bus 09-09] [ 0.079825] pci 0001:00:07.0: PCI bridge to [bus 02-02] [ 0.079837] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff] [ 0.079879] pci 0001:01:07.0: [106b:004f] type 0 class 0x00ff00 [ 0.079891] pci 0001:01:07.0: reg 10: [mem 0x80000000-0x8007ffff] [ 0.079954] pci 0001:01:0b.0: [1033:0035] type 0 class 0x000c03 [ 0.079970] pci 0001:01:0b.0: reg 10: [mem 0x80082000-0x80082fff] [ 0.080031] pci 0001:01:0b.0: supports D1 D2 [ 0.080035] pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080061] pci 0001:01:0b.1: [1033:0035] type 0 class 0x000c03 [ 0.080077] pci 0001:01:0b.1: reg 10: [mem 0x80081000-0x80081fff] [ 0.080138] pci 0001:01:0b.1: supports D1 D2 [ 0.080142] pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080169] pci 0001:01:0b.2: [1033:00e0] type 0 class 0x000c03 [ 0.080185] pci 0001:01:0b.2: reg 10: [mem 0x80080000-0x800800ff] [ 0.080246] pci 0001:01:0b.2: supports D1 D2 [ 0.080250] pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080271] pci 0001:00:08.0: PCI bridge to [bus 01-01] [ 0.080284] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff] [ 0.080352] pci 0001:03:0c.0: [1166:0240] type 0 class 0x000101 [ 0.080364] pci 0001:03:0c.0: reg 10: [io 0x0000-0x0007] [ 0.080373] pci 0001:03:0c.0: reg 14: [io 0x0000-0x0003] [ 0.080381] pci 0001:03:0c.0: reg 18: [io 0x0000-0x0007] [ 0.080390] pci 0001:03:0c.0: reg 1c: [io 0x0000-0x0003] [ 0.080399] pci 0001:03:0c.0: reg 20: [io 0x0000-0x000f] [ 0.080407] pci 0001:03:0c.0: reg 24: [mem 0xfa402000-0xfa403fff] [ 0.080445] pci 0001:03:0d.0: [106b:0050] type 0 class 0x00ff00 [ 0.080456] pci 0001:03:0d.0: reg 10: [mem 0xfa404000-0xfa407fff] [ 0.080523] pci 0001:03:0e.0: [106b:0052] type 0 class 0x000c00 [ 0.080538] pci 0001:03:0e.0: reg 10: [mem 0xfa400000-0xfa400fff] [ 0.080595] pci 0001:03:0e.0: supports D1 D2 [ 0.080599] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.080616] pci 0001:00:09.0: PCI bridge to [bus 03-03] [ 0.080628] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff] [ 0.082103] PCI: max bus depth: 1 pci_try_num: 2 [ 0.082150] pci 0000:00:0b.0: PCI bridge to [bus 0a-0a] [ 0.082160] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xafffffff] [ 0.082173] pci 0001:00:01.0: PCI bridge to [bus 04-04] [ 0.082183] pci 0001:00:02.0: PCI bridge to [bus 05-05] [ 0.082191] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff] [ 0.082201] pci 0001:00:03.0: PCI bridge to [bus 06-06] [ 0.082211] pci 0001:00:04.0: PCI bridge to [bus 07-07] [ 0.082220] pci 0001:00:05.0: PCI bridge to [bus 08-08] [ 0.082230] pci 0001:00:06.0: PCI bridge to [bus 09-09] [ 0.082240] pci 0001:00:07.0: PCI bridge to [bus 02-02] [ 0.082248] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff] [ 0.082258] pci 0001:00:08.0: PCI bridge to [bus 01-01] [ 0.082266] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff] [ 0.082277] pci 0001:00:09.0: PCI bridge to [bus 03-03] [ 0.082285] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff] [ 0.082316] pci_bus 0000:00: resource 0 [io 0x10000-0x80ffff] [ 0.082321] pci_bus 0000:00: resource 1 [mem 0xf1000000-0xf1ffffff] [ 0.082325] pci_bus 0000:00: resource 2 [mem 0x90000000-0xafffffff] [ 0.082330] pci_bus 0000:0a: resource 1 [mem 0x90000000-0xafffffff] [ 0.082334] pci_bus 0001:00: resource 0 [io 0x811000-0xc10fff] [ 0.082339] pci_bus 0001:00: resource 1 [mem 0xfa000000-0xffffffff] [ 0.082343] pci_bus 0001:00: resource 2 [mem 0x80000000-0x8fffffff] [ 0.082348] pci_bus 0001:00: resource 3 [mem 0xb0000000-0xefffffff] [ 0.082352] pci_bus 0001:05: resource 1 [mem 0xfa500000-0xfa5fffff] [ 0.082357] pci_bus 0001:02: resource 1 [mem 0xfa000000-0xfa3fffff] [ 0.082362] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff] [ 0.082366] pci_bus 0001:03: resource 1 [mem 0xfa400000-0xfa4fffff] [ 0.082370] PCI: Probing PCI hardware done [ 0.086079] opal: Node not found [ 0.087592] bio: create slab at 0 [ 0.087908] vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=none,locks=none [ 0.087959] vgaarb: loaded [ 0.087963] vgaarb: bridge control possible 0000:0a:00.0 [ 0.088209] SCSI subsystem initialized [ 0.088286] libata version 3.00 loaded. [ 0.088510] Switching to clocksource timebase [ 0.096337] NET: Registered protocol family 2 [ 0.096765] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.099783] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.105893] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.107147] TCP: Hash tables configured (established 524288 bind 65536) [ 0.107158] TCP reno registered [ 0.107194] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.107314] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.107647] NET: Registered protocol family 1 [ 0.107691] PCI: CLS mismatch (32 != 64), using 128 bytes [ 0.107712] pci 0001:00:03.0: Found enabled HT MSI Mapping [ 0.107726] pci 0001:00:04.0: Found enabled HT MSI Mapping [ 0.107739] pci 0001:00:05.0: Found enabled HT MSI Mapping [ 0.107752] pci 0001:00:06.0: Found enabled HT MSI Mapping [ 0.107785] pci 0001:01:0b.0: enabling device (0000 -> 0002) [ 0.160568] pci 0001:01:0b.1: enabling device (0000 -> 0002) [ 0.216551] pci 0001:01:0b.2: enabling device (0004 -> 0006) [ 0.216667] Unpacking initramfs... [ 0.536293] Freeing initrd memory: 11328k freed [ 0.552547] Registering G5 CPU frequency driver [ 0.552556] Frequency method: SCOM, Voltage method: GPIO [ 0.552562] Low: 1250 Mhz, High: 2500 Mhz, Cur: 2500 MHz [ 0.552639] Hypercall H_BEST_ENERGY not supported [ 0.552984] audit: initializing netlink socket (disabled) [ 0.553006] type=2000 audit(1397985316.551:1): initialized [ 0.589695] HugeTLB registered 16 MB page size, pre-allocated 0 pages [ 0.590206] VFS: Disk quotas dquot_6.5.2 [ 0.590293] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.590429] msgmni has been set to 15820 [ 0.590751] alg: No test for stdrng (krng) [ 0.590821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.590833] io scheduler noop registered [ 0.590839] io scheduler deadline registered [ 0.590884] io scheduler cfq registered (default) [ 0.591442] Using unsupported 1600x1200 NVDA,Display-A at 90020000, depth=8, pitch=2048 [ 0.624813] Console: switching to colour frame buffer device 200x75 [ 0.657958] fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@0/NVDA,Display-A@0 [ 0.658326] vio_register_driver: driver hvc_console registering [ 0.658350] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.824707] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 0.824908] ttyPZ0 at MMIO 0x80013020 (irq = 23) is a Z85c30 ESCC - Serial port [ 0.825192] ttyPZ1 at MMIO 0x80013000 (irq = 24) is a Z85c30 ESCC - Serial port [ 0.825500] Linux agpgart interface v0.103 [ 0.825755] MacIO PCI driver attached to Shasta chipset [ 0.826588] pata-pci-macio 0001:03:0d.0: enabling device (0004 -> 0006) [ 0.840549] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset Shasta ATA-6, Apple bus ID 3 [ 0.841096] scsi0 : pata_macio [ 0.841318] ata1: PATA max UDMA/133 irq 38 [ 0.841604] mousedev: PS/2 mouse device common for all mice [ 0.890091] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 0.890646] TCP cubic registered [ 0.890859] NET: Registered protocol family 10 [ 0.891870] Mobile IPv6 [ 0.891938] NET: Registered protocol family 17 [ 0.892060] Registering the dns_resolver key type [ 0.892219] PM: Registered nosave memory: 000000007f000000 - 0000000080000000 [ 0.892597] PM: Hibernation image not present or could not be loaded. [ 0.892615] registered taskstats version 1 [ 0.943024] rtc-generic rtc-generic: setting system clock to 2014-04-20 09:15:17 UTC (1397985317) [ 0.943267] Initializing network drop monitor service [ 1.004904] ata1.00: ATAPI: HL-DT-ST DVD-RW GWA-4165B, C006, max UDMA/66 [ 1.020852] ata1.00: configured for UDMA/66 [ 1.030656] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4165B C006 PQ: 0 ANSI: 5 [ 1.030886] ata1.00: K2/Shasta alignment limits applied [ 1.031510] Freeing unused kernel memory: 432k freed [ 1.052241] udevd[60]: starting version 175 [ 1.091168] usbcore: registered new interface driver usbfs [ 1.091364] usbcore: registered new interface driver hub [ 1.096176] sata_svw 0001:03:0c.0: version 2.3 [ 1.096274] sata_svw 0001:03:0c.0: Using 32-bit DMA via iommu [ 1.096848] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 1.097054] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.097456] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.097647] usbcore: registered new device driver usb [ 1.099301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.099559] ehci_hcd 0001:01:0b.2: EHCI Host Controller [ 1.099758] ehci_hcd 0001:01:0b.2: new USB bus registered, assigned bus number 1 [ 1.101154] scsi1 : sata_svw [ 1.101457] scsi2 : sata_svw [ 1.101888] scsi3 : sata_svw [ 1.102235] scsi4 : sata_svw [ 1.102415] ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402000 irq 18 [ 1.102615] ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402100 irq 18 [ 1.102814] ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402200 irq 18 [ 1.103013] ata5: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402300 irq 18 [ 1.104031] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.104288] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002) [ 1.107110] tg3.c:v3.121 (November 2, 2011) [ 1.116918] tg3 0001:05:04.0: Using 32-bit DMA via iommu [ 1.125132] ehci_hcd 0001:01:0b.2: irq 70, io mem 0x80080000 [ 1.129408] tg3 0001:05:04.0: eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address xx:xx:xx:xx:xx:xx [ 1.129415] tg3 0001:05:04.0: eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.129421] tg3 0001:05:04.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.129426] tg3 0001:05:04.0: eth0: dma_rwctrl[76144000] dma_mask[40-bit] [ 1.167883] firewire_ohci: Added fw-ohci device 0001:03:0e.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 1.169774] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.174941] tg3 0001:05:04.1: Using 32-bit DMA via iommu [ 1.175812] tg3 0001:05:04.1: eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address xx:xx:xx:xx:xx:xx [ 1.175818] tg3 0001:05:04.1: eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.175824] tg3 0001:05:04.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.175829] tg3 0001:05:04.1: eth1: dma_rwctrl[76144000] dma_mask[40-bit] [ 1.232549] ehci_hcd 0001:01:0b.2: USB 2.0 started, EHCI 1.00 [ 1.241740] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.250892] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.260035] usb usb1: Product: EHCI Host Controller [ 1.269177] usb usb1: Manufacturer: Linux 3.2.0-4-powerpc64 ehci_hcd [ 1.278345] usb usb1: SerialNumber: 0001:01:0b.2 [ 1.287655] hub 1-0:1.0: USB hub found [ 1.296720] hub 1-0:1.0: 5 ports detected [ 1.305972] ohci_hcd 0001:01:0b.0: OHCI Host Controller [ 1.315202] ohci_hcd 0001:01:0b.0: new USB bus registered, assigned bus number 2 [ 1.324394] ohci_hcd 0001:01:0b.0: irq 70, io mem 0x80082000 [ 1.408405] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.417490] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.426500] usb usb2: Product: OHCI Host Controller [ 1.432582] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.440982] ata2.00: ATA-7: HDS728080PLA380 40Y9028LEN, PF2OA65A, max UDMA/133 [ 1.440987] ata2.00: 156312576 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.456960] ata2.00: configured for UDMA/133 [ 1.471161] usb usb2: Manufacturer: Linux 3.2.0-4-powerpc64 ohci_hcd [ 1.471318] scsi 1:0:0:0: Direct-Access ATA HDS728080PLA380 PF2O PQ: 0 ANSI: 5 [ 1.471608] scsi 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.498345] usb usb2: SerialNumber: 0001:01:0b.0 [ 1.507498] hub 2-0:1.0: USB hub found [ 1.516460] hub 2-0:1.0: 3 ports detected [ 1.525504] ohci_hcd 0001:01:0b.1: OHCI Host Controller [ 1.534394] ohci_hcd 0001:01:0b.1: new USB bus registered, assigned bus number 3 [ 1.543308] ohci_hcd 0001:01:0b.1: irq 70, io mem 0x80081000 [ 1.624373] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.633347] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.642354] usb usb3: Product: OHCI Host Controller [ 1.651344] usb usb3: Manufacturer: Linux 3.2.0-4-powerpc64 ohci_hcd [ 1.660329] usb usb3: SerialNumber: 0001:01:0b.1 [ 1.669472] hub 3-0:1.0: USB hub found [ 1.678280] hub 3-0:1.0: 2 ports detected [ 1.728695] firewire_core: created device fw0: GUID 001451fffe277302, S800 [ 1.737458] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 1.827371] ata3: SATA link down (SStatus 4 SControl 300) [ 1.944553] usb 2-1: new full-speed USB device number 2 using ohci_hcd [ 2.156569] usb 2-1: New USB device found, idVendor=0451, idProduct=2046 [ 2.165255] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.175700] hub 2-1:1.0: USB hub found [ 2.185570] hub 2-1:1.0: 4 ports detected [ 2.498562] usb 2-1.3: new full-speed USB device number 3 using ohci_hcd [ 2.621562] usb 2-1.3: New USB device found, idVendor=05ac, idProduct=1003 [ 2.630295] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.639010] usb 2-1.3: Product: Hub in Apple Extended USB Keyboard [ 2.647692] usb 2-1.3: Manufacturer: Mitsumi Electric [ 2.657636] hub 2-1.3:1.0: USB hub found [ 2.667562] hub 2-1.3:1.0: 3 ports detected [ 2.860548] ata4: failed to resume link (SControl 0) [ 2.869100] ata4: SATA link down (SStatus 0 SControl 0) [ 2.974560] usb 2-1.3.3: new full-speed USB device number 4 using ohci_hcd [ 3.097557] usb 2-1.3.3: New USB device found, idVendor=05ac, idProduct=020d [ 3.106316] usb 2-1.3.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 3.115173] usb 2-1.3.3: Product: Apple Extended USB Keyboard [ 3.123970] usb 2-1.3.3: Manufacturer: Mitsumi Electric [ 3.426553] usb 2-1.3.1: new low-speed USB device number 5 using ohci_hcd [ 3.546557] usb 2-1.3.1: New USB device found, idVendor=045e, idProduct=077a [ 3.555671] usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.564750] usb 2-1.3.1: Product: Express Mouse [ 3.573748] usb 2-1.3.1: Manufacturer: Microsoft [ 3.904612] ata5: failed to resume link (SControl 0) [ 3.913575] ata5: SATA link down (SStatus 0 SControl 0) [ 3.938290] sd 1:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.946020] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.0/input/input0 [ 3.946161] generic-usb 0003:05AC:020D.0001: input,hidraw0: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:01:0b.0-1.3.3/input0 [ 3.957686] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.1/input/input1 [ 3.957791] generic-usb 0003:05AC:020D.0002: input,hidraw1: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:01:0b.0-1.3.3/input1 [ 3.972273] input: Microsoft Express Mouse as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.0/input/input2 [ 3.972436] generic-usb 0003:045E:077A.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Express Mouse] on usb-0001:01:0b.0-1.3.1/input0 [ 3.972472] usbcore: registered new interface driver usbhid [ 3.972475] usbhid: USB HID core driver [ 4.024941] sd 1:0:0:0: [sda] Write Protect is off [ 4.034664] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.034696] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.065025] sda: [mac] sda1 sda2 sda3 sda4 sda5 [ 4.075713] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.581833] windfarm: initializing for dual-core desktop G5 [ 5.005529] PM: Starting manual resume from disk [ 5.015556] PM: Hibernation image partition 8:4 present [ 5.015560] PM: Looking for hibernation image. [ 5.015802] PM: Image not found (code -22) [ 5.015806] PM: Hibernation image not present or could not be loaded. [ 5.113228] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 7.056069] udevd[343]: starting version 175 [ 7.293265] i2c i2c-0: wf_smu_sat: attach_adapter method is deprecated [ 7.303751] i2c i2c-0: Please use another way to instantiate your i2c_client [ 7.314322] i2c i2c-0: wf_lm75: attach_adapter method is deprecated [ 7.324843] i2c i2c-0: Please use another way to instantiate your i2c_client [ 7.335392] i2c i2c-0: wf_max6690: attach_adapter method is deprecated [ 7.345945] i2c i2c-0: Please use another way to instantiate your i2c_client [ 7.356544] PowerMac i2c bus smu 14 registered [ 7.367264] i2c i2c-1: wf_smu_sat: attach_adapter method is deprecated [ 7.378007] i2c i2c-1: Please use another way to instantiate your i2c_client [ 7.388765] wf_sat: creating sat at address b0 [ 7.388856] wf_sat: creating sat at address b2 [ 7.388940] i2c i2c-1: wf_lm75: attach_adapter method is deprecated [ 7.399708] i2c i2c-1: Please use another way to instantiate your i2c_client [ 7.410576] i2c i2c-1: wf_max6690: attach_adapter method is deprecated [ 7.421393] i2c i2c-1: Please use another way to instantiate your i2c_client [ 7.432233] PowerMac i2c bus smu 11 registered [ 7.443043] i2c i2c-2: wf_smu_sat: attach_adapter method is deprecated [ 7.453980] i2c i2c-2: Please use another way to instantiate your i2c_client [ 7.464903] i2c i2c-2: wf_lm75: attach_adapter method is deprecated [ 7.475898] i2c i2c-2: Please use another way to instantiate your i2c_client [ 7.486881] i2c i2c-2: wf_max6690: attach_adapter method is deprecated [ 7.497853] i2c i2c-2: Please use another way to instantiate your i2c_client [ 7.508811] PowerMac i2c bus mac-io 0 registered [ 7.519756] i2c i2c-3: wf_smu_sat: attach_adapter method is deprecated [ 7.530743] i2c i2c-3: Please use another way to instantiate your i2c_client [ 7.541822] i2c i2c-3: wf_lm75: attach_adapter method is deprecated [ 7.552814] i2c i2c-3: Please use another way to instantiate your i2c_client [ 7.563922] i2c i2c-3: wf_max6690: attach_adapter method is deprecated [ 7.575014] i2c i2c-3: Please use another way to instantiate your i2c_client [ 7.586149] PowerMac i2c bus mac-io 0 registered [ 7.597315] i2c i2c-4: wf_smu_sat: attach_adapter method is deprecated [ 7.608537] i2c i2c-4: Please use another way to instantiate your i2c_client [ 7.619748] i2c i2c-4: wf_lm75: attach_adapter method is deprecated [ 7.630057] [drm] Initialized drm 1.1.0 20060810 [ 7.642244] i2c i2c-4: Please use another way to instantiate your i2c_client [ 7.653678] i2c i2c-4: wf_max6690: attach_adapter method is deprecated [ 7.665106] i2c i2c-4: Please use another way to instantiate your i2c_client [ 7.676582] found max6690, loc=BACKSIDE addr=0x98 [ 7.688216] found max6690, loc=TUNNEL addr=0x9c [ 7.699680] PowerMac i2c bus u4 1 registered [ 7.828180] [drm] nouveau 0000:0a:00.0: Detected an NV40 generation card (0x043100a4) [ 7.839755] checking generic (90020000 258000) vs hw (90000000 10000000) [ 7.839761] fb: conflicting fb hw usage nouveaufb vs OFfb NVDA,Displ - removing generic driver [ 7.851328] Console: switching to colour dummy device 80x25 [ 7.852298] [drm] nouveau 0000:0a:00.0: OF bios successfully copied (6447 bytes) [ 7.852334] [drm] nouveau 0000:0a:00.0: Checking PRAMIN for VBIOS [ 7.860547] windfarm: CPUs control loops started. [ 7.910846] [drm] nouveau 0000:0a:00.0: ... BIOS checksum invalid [ 7.910855] [drm] nouveau 0000:0a:00.0: Checking PROM for VBIOS [ 7.911003] [drm] nouveau 0000:0a:00.0: ... BIOS checksum invalid [ 7.911010] [drm] nouveau 0000:0a:00.0: Checking ACPI for VBIOS [ 7.911128] [drm] nouveau 0000:0a:00.0: ... BIOS checksum invalid [ 7.911135] [drm] nouveau 0000:0a:00.0: Checking PCIROM for VBIOS [ 7.911269] [drm] nouveau 0000:0a:00.0: ... BIOS checksum invalid [ 7.911277] [drm] nouveau 0000:0a:00.0: Using VBIOS from PRAMIN [ 7.911285] [drm] nouveau 0000:0a:00.0: BIT BIOS found [ 7.911298] [drm] nouveau 0000:0a:00.0: Bios version xxx.xxx.xxx.xxx [ 7.911311] [drm] nouveau 0000:0a:00.0: TMDS table version 1.1 [ 7.911406] i2c i2c-5: wf_smu_sat: attach_adapter method is deprecated [ 7.911414] i2c i2c-5: Please use another way to instantiate your i2c_client [ 7.911426] i2c i2c-5: wf_lm75: attach_adapter method is deprecated [ 7.911433] i2c i2c-5: Please use another way to instantiate your i2c_client [ 7.911443] i2c i2c-5: wf_max6690: attach_adapter method is deprecated [ 7.911451] i2c i2c-5: Please use another way to instantiate your i2c_client [ 7.911501] i2c i2c-6: wf_smu_sat: attach_adapter method is deprecated [ 7.911509] i2c i2c-6: Please use another way to instantiate your i2c_client [ 7.911518] i2c i2c-6: wf_lm75: attach_adapter method is deprecated [ 7.911525] i2c i2c-6: Please use another way to instantiate your i2c_client [ 7.911534] i2c i2c-6: wf_max6690: attach_adapter method is deprecated [ 7.911542] i2c i2c-6: Please use another way to instantiate your i2c_client [ 7.911604] i2c i2c-7: wf_smu_sat: attach_adapter method is deprecated [ 7.911612] i2c i2c-7: Please use another way to instantiate your i2c_client [ 7.911620] i2c i2c-7: wf_lm75: attach_adapter method is deprecated [ 7.911628] i2c i2c-7: Please use another way to instantiate your i2c_client [ 7.911636] i2c i2c-7: wf_max6690: attach_adapter method is deprecated [ 7.911644] i2c i2c-7: Please use another way to instantiate your i2c_client [ 7.911658] [drm] nouveau 0000:0a:00.0: MXM: no VBIOS data, nothing to do [ 7.911666] [drm] nouveau 0000:0a:00.0: DCB version 3.0 [ 7.911679] [drm] nouveau 0000:0a:00.0: DCB outp 00: 01000100 00000028 [ 7.911688] [drm] nouveau 0000:0a:00.0: DCB outp 01: 03000102 00000000 [ 7.911695] [drm] nouveau 0000:0a:00.0: DCB outp 02: 04011210 00000028 [ 7.911703] [drm] nouveau 0000:0a:00.0: DCB outp 03: 02111212 02000100 [ 7.911711] [drm] nouveau 0000:0a:00.0: DCB outp 04: 02011211 0020c070 [ 7.911719] [drm] nouveau 0000:0a:00.0: DCB conn 00: 1030 [ 7.911726] [drm] nouveau 0000:0a:00.0: DCB conn 01: 2130 [ 7.911740] [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 0 at offset 0x0744 [ 7.912001] [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 1 at offset 0x0B87 [ 7.924314] [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 2 at offset 0x105B [ 7.924346] [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 3 at offset 0x1195 [ 7.927597] [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 4 at offset 0x1273 [ 7.927972] nouveau 0000:0a:00.0: Using 32-bit DMA via iommu [ 7.928080] [TTM] Zone kernel: Available graphics memory: 4050210 kiB [ 7.928088] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 7.928095] [TTM] Initializing pool allocator [ 7.928136] [drm] nouveau 0000:0a:00.0: Detected 256MiB VRAM (DDR1) [ 7.946969] [drm] nouveau 0000:0a:00.0: 512 MiB GART (aperture) [ 7.948344] [drm] nouveau 0000:0a:00.0: Detected TMDS transmitter: sil164 [ 7.983009] sil164 7-0038: Detected device 1:6.0 [ 7.985796] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.985803] [drm] No driver support for vblank timestamp query. [ 7.991242] [drm] nouveau 0000:0a:00.0: 1 available performance level(s) [ 7.991253] [drm] nouveau 0000:0a:00.0: 0: core 300MHz shader 300MHz memory 500MHz fanspeed 100% [ 7.991265] [drm] nouveau 0000:0a:00.0: c: core 300MHz shader 300MHz memory 500MHz fanspeed 100% [ 7.994147] [drm] nouveau 0000:0a:00.0: 0x14C5: Parsing digital output script table [ 8.044213] [drm] nouveau 0000:0a:00.0: Setting dpms mode 3 on TV encoder (output 4) [ 8.124681] [drm] nouveau 0000:0a:00.0: allocated 1600x1200 fb: 0x49000, bo c000000271d6bc00 [ 8.135150] [drm] nouveau 0000:0a:00.0: 0x14C5: Parsing digital output script table [ 8.184679] Console: switching to colour frame buffer device 200x75 [ 8.186396] fb0: nouveaufb frame buffer device [ 8.186407] drm: registered panic notifier [ 8.186422] [drm] Initialized nouveau 1.0.0 20120316 for 0000:0a:00.0 on minor 0 [ 8.721236] sat 0 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 9.117100] Adding 3228516k swap on /dev/sda4. Priority:-1 extents:1 across:3228516k [ 9.139967] EXT4-fs (sda3): re-mounted. Opts: (null) [ 9.366201] sat 0 partition c4: c4 4 1 7f a0 12 20 5f ff 55 9a 13 7b 12 0 0 [ 9.388035] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 9.511550] loop: module loaded [ 9.683882] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa. [ 10.230786] sat 0 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 10.879651] sat 0 partition c5: c5 4 1 7f a0 12 20 5f ff 55 b8 14 7b 12 0 0 [ 11.181594] u3msi: allocated virq 0x19 (hw 0x8) addr 0xfee00000 [ 11.223878] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.409669] RPC: Registered named UNIX socket transport module. [ 11.409698] RPC: Registered udp transport module. [ 11.409710] RPC: Registered tcp transport module. [ 11.409722] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.447282] FS-Cache: Loaded [ 11.520715] FS-Cache: Netfs 'nfs' registered for caching [ 11.542721] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 11.743417] sat 1 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 12.387921] sat 1 partition c4: c4 4 1 7f a0 12 20 5f ff 55 29 14 7b 12 0 0 [ 13.252130] sat 1 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 13.901117] sat 1 partition c5: c5 4 1 7f a0 12 20 5f ff 55 48 15 7b 12 0 0 [ 14.252831] tg3 0001:05:04.0: eth0: Link is up at 1000 Mbps, full duplex [ 14.252931] tg3 0001:05:04.0: eth0: Flow control is on for TX and on for RX [ 14.254237] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.531172] windfarm: Backside control loop started. [ 14.583907] windfarm: Slots control loop started. [ 14.689253] windfarm: Drive bay control loop started. [ 24.364497] eth0: no IPv6 routers present [ 35.345248] usb 2-1.3: USB disconnect, device number 3 [ 35.345274] usb 2-1.3.1: USB disconnect, device number 5 [ 35.372843] usb 2-1.3.3: USB disconnect, device number 4