processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping : 6 cpu MHz : 1999.998 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 6000.18 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping : 6 cpu MHz : 1999.998 cache size : 4096 KB physical id : 3 siblings : 2 core id : 0 cpu cores : 2 apicid : 6 initial apicid : 6 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 6000.04 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping : 6 cpu MHz : 1999.998 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 6000.18 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping : 6 cpu MHz : 1999.998 cache size : 4096 KB physical id : 3 siblings : 2 core id : 1 cpu cores : 2 apicid : 7 initial apicid : 7 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca lahf_lm dts tpr_shadow bogomips : 6000.04 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: -[0000:00]-+-00.0 Intel Corporation 5000P Chipset Memory Controller Hub [8086:25d8] +-02.0-[09-12]--+-00.0-[0a-0f]--+-00.0-[0b-0d]-- | | +-01.0-[0e]-- | | \-02.0-[0f]-- | \-00.3-[10-12]-- +-03.0-[06-08]----00.0-[07-08]--+-04.0-[08]-- | \-08.0 Hewlett-Packard Company Smart Array E200i (SAS Controller) [103c:3238] +-04.0-[13-15]-- +-05.0-[16]-- +-06.0-[02-03]----00.0-[03]----00.0 Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] +-07.0-[04-05]----00.0-[05]----00.0 Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] +-10.0 Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] +-10.1 Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] +-10.2 Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] +-11.0 Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] +-13.0 Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] +-15.0 Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] +-16.0 Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] +-1d.0 Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] +-1d.1 Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] +-1d.2 Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] +-1d.3 Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] +-1d.7 Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] +-1e.0-[01]--+-03.0 Advanced Micro Devices [AMD] nee ATI ES1000 [1002:515e] | +-04.0 Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] | +-04.2 Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] | +-04.4 Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller [103c:3300] | \-04.6 Hewlett-Packard Company Integrated Lights-Out Standard KCS Interface [103c:3302] +-1f.0 Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] \-1f.1 Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] # dmidecode 2.11 SMBIOS 2.4 present. 69 structures occupying 1951 bytes. Table at 0x000EE000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: HP Version: P58 Release Date: 05/02/2011 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 4096 kB Characteristics: PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported EDD is supported 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported BIOS boot specification is supported Function key-initiated network boot is supported Targeted content distribution is supported Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: HP Product Name: ProLiant DL360 G5 Version: Not Specified Serial Number: XXXXXXXXXX UUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX Wake-up Type: Power Switch SKU Number: 416559-291 Family: ProLiant Handle 0x0300, DMI type 3, 17 bytes Chassis Information Manufacturer: HP Type: Rack Mount Chassis Lock: Not Present Version: Not Specified Serial Number: XXXXXXXXXX Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0400, DMI type 4, 40 bytes Processor Information Socket Designation: Proc 1 Type: Central Processor Family: Xeon Manufacturer: Intel ID: F6 06 00 00 FF FB EB BF Signature: Type 0, Family 6, Model 15, Stepping 6 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Not Specified Voltage: 1.4 V External Clock: 1333 MHz Max Speed: 4800 MHz Current Speed: 3000 MHz Status: Populated, Enabled Upgrade: Socket LGA771 L1 Cache Handle: 0x0710 L2 Cache Handle: 0x0720 L3 Cache Handle: 0x0730 Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Core Count: 2 Core Enabled: 2 Thread Count: 2 Characteristics: 64-bit capable Handle 0x0406, DMI type 4, 40 bytes Processor Information Socket Designation: Proc 2 Type: Central Processor Family: Xeon Manufacturer: Intel ID: F6 06 00 00 FF FB EB BF Signature: Type 0, Family 6, Model 15, Stepping 6 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Not Specified Voltage: 1.4 V External Clock: 1333 MHz Max Speed: 4800 MHz Current Speed: 3000 MHz Status: Populated, Idle Upgrade: Socket LGA771 L1 Cache Handle: 0x0716 L2 Cache Handle: 0x0726 L3 Cache Handle: 0x0736 Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Core Count: 2 Core Enabled: 2 Thread Count: 2 Characteristics: 64-bit capable Handle 0x0710, DMI type 7, 19 bytes Cache Information Socket Designation: Processor 1 Internal L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 64 kB Maximum Size: 128 kB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative Handle 0x0716, DMI type 7, 19 bytes Cache Information Socket Designation: Processor 2 Internal L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 64 kB Maximum Size: 128 kB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative Handle 0x0720, DMI type 7, 19 bytes Cache Information Socket Designation: Processor 1 Internal L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 4096 kB Maximum Size: 16384 kB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unknown Associativity: 8-way Set-associative Handle 0x0726, DMI type 7, 19 bytes Cache Information Socket Designation: Processor 2 Internal L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 4096 kB Maximum Size: 16384 kB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unknown Associativity: 8-way Set-associative Handle 0x0730, DMI type 7, 19 bytes Cache Information Socket Designation: Processor 1 Internal L3 Cache Configuration: Disabled, Not Socketed, Level 3 Operational Mode: Unknown Location: Internal Installed Size: 0 kB Maximum Size: 8192 kB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unknown Associativity: Other Handle 0x0736, DMI type 7, 19 bytes Cache Information Socket Designation: Processor 2 Internal L3 Cache Configuration: Disabled, Not Socketed, Level 3 Operational Mode: Unknown Location: Internal Installed Size: 0 kB Maximum Size: 8192 kB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unknown Associativity: Other Handle 0x0801, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J58 Internal Connector Type: Access Bus (USB) External Reference Designator: USB Port 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0802, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J58 Internal Connector Type: Access Bus (USB) External Reference Designator: USB Port 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0803, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J58 Internal Connector Type: Access Bus (USB) External Reference Designator: USB Port 3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0804, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J58 Internal Connector Type: Access Bus (USB) External Reference Designator: USB Port 4 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0901, DMI type 9, 13 bytes System Slot Information Designation: PCI-E Slot 1 Type: x8 PCI Express Current Usage: Available Length: Short ID: 1 Characteristics: 3.3 V is provided PME signal is supported Handle 0x0902, DMI type 9, 13 bytes System Slot Information Designation: PCI-E Slot 2 Type: x8 PCI Express Current Usage: Available Length: Long ID: 2 Characteristics: 3.3 V is provided PME signal is supported Handle 0x0B00, DMI type 11, 5 bytes OEM Strings String 1: Product ID: 416559-291 Handle 0x1000, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Single-bit ECC Maximum Capacity: 64 GB Error Information Handle: Not Provided Number Of Devices: 8 Handle 0x1100, DMI type 17, 23 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: FB-DIMM Set: 1 Locator: DIMM 1A Bank Locator: Not Specified Type: DDR2 FB-DIMM Type Detail: Synchronous Speed: 667 MHz Handle 0x1101, DMI type 17, 23 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: No Module Installed Form Factor: FB-DIMM Set: 3 Locator: DIMM 2C Bank Locator: Not Specified Type: DDR2 FB-DIMM Type Detail: Synchronous Speed: Unknown Handle 0x1102, DMI type 17, 23 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: FB-DIMM Set: 1 Locator: DIMM 3A Bank Locator: Not Specified Type: DDR2 FB-DIMM Type Detail: Synchronous Speed: 667 MHz Handle 0x1103, DMI type 17, 23 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: No Module Installed Form Factor: FB-DIMM Set: 3 Locator: DIMM 4C Bank Locator: Not Specified Type: DDR2 FB-DIMM Type Detail: Synchronous Speed: Unknown Handle 0x1104, DMI type 17, 23 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: FB-DIMM Set: 2 Locator: DIMM 5B Bank Locator: Not Specified Type: DDR2 FB-DIMM Type Detail: Synchronous Speed: 667 MHz Handle 0x1105, DMI type 17, 23 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: No Module Installed Form Factor: FB-DIMM Set: 4 Locator: DIMM 6D Bank Locator: Not Specified Type: DDR2 FB-DIMM Type Detail: Synchronous Speed: Unknown Handle 0x1106, DMI type 17, 23 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: FB-DIMM Set: 2 Locator: DIMM 7B Bank Locator: Not Specified Type: DDR2 FB-DIMM Type Detail: Synchronous Speed: 667 MHz Handle 0x1107, DMI type 17, 23 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: No Module Installed Form Factor: FB-DIMM Set: 4 Locator: DIMM 8D Bank Locator: Not Specified Type: DDR2 FB-DIMM Type Detail: Synchronous Speed: Unknown Handle 0x1300, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0022FFFFFFF Range Size: 8960 MB Physical Array Handle: 0x1000 Partition Width: 2 Handle 0x1400, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0022FFFFFFF Range Size: 8960 MB Physical Device Handle: 0x1100 Memory Array Mapped Address Handle: 0x1300 Partition Row Position: 1 Interleave Position: 1 Interleaved Data Depth: Unknown Handle 0x1401, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x1101 Memory Array Mapped Address Handle: 0x1300 Partition Row Position: 1 Interleave Position: 1 Interleaved Data Depth: Unknown Handle 0x1402, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0022FFFFFFF Range Size: 8960 MB Physical Device Handle: 0x1102 Memory Array Mapped Address Handle: 0x1300 Partition Row Position: 1 Interleave Position: 2 Interleaved Data Depth: Unknown Handle 0x1403, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x1103 Memory Array Mapped Address Handle: 0x1300 Partition Row Position: 1 Interleave Position: 2 Interleaved Data Depth: Unknown Handle 0x1404, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0022FFFFFFF Range Size: 8960 MB Physical Device Handle: 0x1104 Memory Array Mapped Address Handle: 0x1300 Partition Row Position: 1 Interleave Position: 1 Interleaved Data Depth: Unknown Handle 0x1405, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x1105 Memory Array Mapped Address Handle: 0x1300 Partition Row Position: 1 Interleave Position: 1 Interleaved Data Depth: Unknown Handle 0x1406, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0022FFFFFFF Range Size: 8960 MB Physical Device Handle: 0x1106 Memory Array Mapped Address Handle: 0x1300 Partition Row Position: 1 Interleave Position: 2 Interleaved Data Depth: Unknown Handle 0x1407, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x1107 Memory Array Mapped Address Handle: 0x1300 Partition Row Position: 1 Interleave Position: 2 Interleaved Data Depth: Unknown Handle 0x2000, DMI type 32, 11 bytes System Boot Information Status: Firmware-detected hardware failure Handle 0x2600, DMI type 38, 18 bytes IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA2 (I/O) Register Spacing: Successive Byte Boundaries Handle 0xC100, DMI type 193, 7 bytes OEM-specific Type Header and Data: C1 07 00 C1 01 01 02 Strings: 05/01/2007 09/18/2006 Handle 0xC200, DMI type 194, 5 bytes OEM-specific Type Header and Data: C2 05 00 C2 01 Handle 0xC300, DMI type 195, 5 bytes OEM-specific Type Header and Data: C3 05 00 C3 01 Strings: $0E110763 Handle 0xC400, DMI type 196, 5 bytes OEM-specific Type Header and Data: C4 05 00 C4 00 Handle 0xC500, DMI type 197, 10 bytes OEM-specific Type Header and Data: C5 0A 00 C5 00 04 00 01 FF 01 Handle 0xDF00, DMI type 223, 7 bytes OEM-specific Type Header and Data: DF 07 00 DF 66 46 70 Handle 0xC506, DMI type 197, 10 bytes OEM-specific Type Header and Data: C5 0A 06 C5 06 04 06 00 FF 02 Handle 0xD300, DMI type 211, 7 bytes OEM-specific Type Header and Data: D3 07 00 D3 00 04 4A Handle 0xD306, DMI type 211, 7 bytes OEM-specific Type Header and Data: D3 07 06 D3 06 04 50 Handle 0xC600, DMI type 198, 11 bytes OEM-specific Type Header and Data: C6 0B 00 C6 17 00 00 01 3C 00 01 Handle 0xC700, DMI type 199, 124 bytes OEM-specific Type Header and Data: C7 7C 00 C7 0B 0A 00 00 10 20 28 09 7A 06 01 00 0F 06 00 00 10 20 29 09 76 06 01 00 0F 06 00 00 10 20 29 09 76 06 01 00 04 04 00 00 07 20 08 06 74 06 01 00 04 04 00 00 07 20 08 06 74 06 01 00 BC 00 00 00 10 20 03 10 FB 06 00 00 BC 00 00 00 10 20 03 10 FB 06 00 00 6B 00 00 00 10 20 02 10 F7 06 00 00 D2 00 00 00 10 20 01 10 F6 06 00 00 02 00 00 00 05 20 15 12 64 0F 00 00 Handle 0xCD00, DMI type 205, 22 bytes OEM-specific Type Header and Data: CD 16 00 CD 01 01 46 41 54 78 00 00 E0 FF 00 00 00 00 00 00 0C 00 Handle 0xCA00, DMI type 202, 8 bytes OEM-specific Type Header and Data: CA 08 00 CA 00 11 FF 01 Handle 0xCA01, DMI type 202, 8 bytes OEM-specific Type Header and Data: CA 08 01 CA 01 11 FF 02 Handle 0xCA02, DMI type 202, 8 bytes OEM-specific Type Header and Data: CA 08 02 CA 02 11 FF 03 Handle 0xCA03, DMI type 202, 8 bytes OEM-specific Type Header and Data: CA 08 03 CA 03 11 FF 04 Handle 0xCA04, DMI type 202, 8 bytes OEM-specific Type Header and Data: CA 08 04 CA 04 11 FF 05 Handle 0xCA05, DMI type 202, 8 bytes OEM-specific Type Header and Data: CA 08 05 CA 05 11 FF 06 Handle 0xCA06, DMI type 202, 8 bytes OEM-specific Type Header and Data: CA 08 06 CA 06 11 FF 07 Handle 0xCA07, DMI type 202, 8 bytes OEM-specific Type Header and Data: CA 08 07 CA 07 11 FF 08 Handle 0xD100, DMI type 209, 20 bytes HP BIOS NIC PCI and MAC Information NIC 1: PCI device 03:00.0, MAC address xx:xx:xx:xx:xx:xx NIC 2: PCI device 05:00.0, MAC address xx:xx:xx:xx:xx:xx Handle 0xD400, DMI type 212, 24 bytes OEM-specific Type Header and Data: D4 18 00 D4 24 43 52 55 00 D8 F6 FF 00 00 00 00 00 40 00 00 00 00 00 00 Handle 0xD500, DMI type 213, 28 bytes OEM-specific Type Header and Data: D5 1C 00 D5 00 00 36 00 00 00 BF 1F 00 00 46 00 00 00 00 00 00 00 00 00 00 00 00 00 Handle 0xD600, DMI type 214, 44 bytes OEM-specific Type Header and Data: D6 2C 00 D6 31 31 00 02 0E 20 00 00 13 20 00 00 00 60 00 00 00 20 00 00 02 20 00 00 04 20 00 00 06 20 00 00 0C 20 00 00 08 20 00 00 Handle 0xD700, DMI type 215, 6 bytes OEM-specific Type Header and Data: D7 06 00 D7 00 05 Handle 0xDB00, DMI type 219, 8 bytes OEM-specific Type Header and Data: DB 08 00 DB FF 08 00 00 Handle 0xDC00, DMI type 218, 45 bytes OEM-specific Type Header and Data: DA 2D 00 DC 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Handle 0xDC01, DMI type 220, 45 bytes OEM-specific Type Header and Data: DC 2D 01 DC 08 00 00 C5 00 FF 01 00 C5 01 FF 02 00 C5 02 FF 03 00 C5 03 FF 04 06 C5 02 FF 05 06 C5 03 FF 06 06 C5 00 FF 07 06 C5 01 FF Handle 0xDD00, DMI type 221, 20 bytes HP BIOS iSCSI NIC PCI and MAC Information NIC 1: PCI device 03:00.0, MAC address xx:xx:xx:xx:xx:xx NIC 2: PCI device 05:00.0, MAC address xx:xx:xx:xx:xx:xx Handle 0xE500, DMI type 229, 20 bytes OEM-specific Type Header and Data: E5 14 00 E5 24 53 52 42 00 00 FC CF 00 00 00 00 00 00 01 00 Handle 0x7F00, DMI type 127, 4 bytes End Of Table Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-358.18.1.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Tue Aug 27 14:23:09 CDT 2013 Command line: ro root=UUID=70778e40-fa2e-45d5-8020-cb150d285e07 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe44000 (usable) BIOS-e820: 00000000cfe44000 - 00000000cfe4c000 (ACPI data) BIOS-e820: 00000000cfe4c000 - 00000000cfe4d000 (usable) BIOS-e820: 00000000cfe4d000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000022ffff000 (usable) DMI 2.4 present. SMBIOS version 2.4 @ 0xF4F40 DMI: HP ProLiant DL360 G5, BIOS P58 05/02/2011 e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x22ffff max_arch_pfn = 0x400000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0D0000000 mask FF0000000 uncachable 1 base 0E0000000 mask FE0000000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xcfe4d max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cfe4d000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cfe4d000 page 4k kernel direct mapping tables up to cfe4d000 @ 8000-e000 init_memory_mapping: 0000000100000000-000000022ffff000 0100000000 - 022fe00000 page 2M 022fe00000 - 022ffff000 page 4k kernel direct mapping tables up to 22ffff000 @ c000-17000 RAMDISK: 3707c000 - 37fefc0b ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) ACPI: XSDT 00000000cfe447c0 0007C (v01 HP ProLiant 00000002 Ò? 0000162E) ACPI: FACP 00000000cfe44840 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E) ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607) ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20090903/tbfadt-607) ACPI: DSDT 00000000cfe44940 02148 (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 00000000cfe44100 00040 ACPI: SPCR 00000000cfe44140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) ACPI: MCFG 00000000cfe441c0 0003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 00000000cfe44200 00038 (v01 HP ProLiant 00000002 Ò? 0000162E) ACPI: SPMI 00000000cfe44240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) ACPI: ERST 00000000cfe44280 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: APIC 00000000cfe44480 0009E (v01 HP ProLiant 00000002 00000000) ACPI: FFFF 00000000cfe44540 00176 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: BERT 00000000cfe446c0 00030 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: HEST 00000000cfe44700 000BC (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: SSDT 00000000cfe49000 00C85 (v01 HP SSDTP 00000001 INTL 20061109) ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. No NUMA configuration found Faking a node at 0000000000000000-000000022ffff000 Bootmem setup node 0 0000000000000000-000000022ffff000 NODE_DATA [0000000000012000 - 0000000000045fff] bootmap [0000000000046000 - 000000000008bfff] pages 46 (8 early reservations) ==> bootmem [0000000000 - 022ffff000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000201b0a4] TEXT DATA BSS ==> [0001000000 - 000201b0a4] #3 [003707c000 - 0037fefc0b] RAMDISK ==> [003707c000 - 0037fefc0b] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #5 [000201c000 - 000201c118] BRK ==> [000201c000 - 000201c118] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #7 [000000c000 - 0000012000] PGTABLE ==> [000000c000 - 0000012000] found SMP MP-table at [ffff8800000f4f80] f4f80 Reserving 129MB of memory at 48MB for crashkernel (System RAM: 8959MB) [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0022ffff Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x000cfe44 0: 0x000cfe4c -> 0x000cfe4d 0: 0x00100000 -> 0x0022ffff On node 0 totalpages: 2096610 DMA zone: 56 pages used for memmap DMA zone: 109 pages reserved DMA zone: 3833 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833149 pages, LIFO batch:31 Normal zone: 17024 pages used for memmap Normal zone: 1228159 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 4 hotplug CPUs nr_irqs_gsi: 48 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfe44000 - 00000000cfe4c000 PM: Registered nosave memory: 00000000cfe4d000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u262144 pcpu-alloc: s94552 r8192 d24232 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065141 Policy zone: Normal Kernel command line: ro root=UUID=70778e40-fa2e-45d5-8020-cb150d285e07 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 8037708k/9175036k available (5222k kernel code, 788596k absent, 348732k reserved, 7119k data, 1264k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:880 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 33554432 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration failed TSC: PIT calibration matches HPET. 1 loops Detected 3000.093 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.18 BogoMIPS (lpj=3000093) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21439 entries in 85 pages APIC routing finalized to flat. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 Performance Events: PEBS fmt0-, Core2 events, Broken BIOS detected, complain to your hardware vendor. [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 43003c) Intel PMU driver. PEBS disabled due to CPU errata. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 #2 #3 Brought up 4 CPUs Total of 4 processors activated (24000.45 BogoMIPS). sizeof(vma)=200 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2648 bytes devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access PCI: HP ProLiant DL360 detected, enabling pci=bfsort. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff88022c8d7600), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. HEST: Table parsing has been initialized. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x1000-0x101f] pci 0000:00:1d.1: reg 20: [io 0x1020-0x103f] pci 0000:00:1d.2: reg 20: [io 0x1040-0x105f] pci 0000:00:1d.3: reg 20: [io 0x1060-0x107f] pci 0000:00:1d.7: reg 10: [mem 0xf7df0000-0xf7df03ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] pci 0000:00:1f.1: reg 20: [io 0x0500-0x050f] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:09:00.3: PME# supported from D0 D3hot D3cold pci 0000:09:00.3: PME# disabled pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:02.0: PCI bridge to [bus 09-12] pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold pci 0000:0a:00.0: PME# disabled pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold pci 0000:0a:01.0: PME# disabled pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold pci 0000:0a:02.0: PME# disabled pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:09:00.0: PCI bridge to [bus 0a-0f] pci 0000:09:00.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:09:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:09:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:0a:00.0: PCI bridge to [bus 0b-0d] pci 0000:0a:00.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:0a:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:0a:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:0a:01.0: PCI bridge to [bus 0e-0e] pci 0000:0a:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:0a:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:0a:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:0a:02.0: PCI bridge to [bus 0f-0f] pci 0000:0a:02.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:0a:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:0a:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:09:00.3: PCI bridge to [bus 10-12] pci 0000:09:00.3: bridge window [io 0xf000-0x0000] (disabled) pci 0000:09:00.3: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:09:00.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:03.0: PCI bridge to [bus 06-08] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:07:08.0: reg 10: [mem 0xfde80000-0xfdefffff 64bit] pci 0000:07:08.0: reg 18: [io 0x4000-0x40ff] pci 0000:07:08.0: reg 1c: [mem 0xfde70000-0xfde77fff] pci 0000:07:08.0: reg 30: [mem 0x00000000-0x00003fff pref] pci 0000:07:08.0: supports D1 pci 0000:06:00.0: PCI bridge to [bus 07-08] pci 0000:06:00.0: bridge window [io 0x4000-0x4fff] pci 0000:06:00.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:07:04.0: PCI bridge to [bus 08-08] pci 0000:07:04.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) pci 0000:07:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:07:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:04.0: PCI bridge to [bus 13-15] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:05.0: PCI bridge to [bus 16-16] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:06.0: PCI bridge to [bus 02-03] pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:06.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x000007ff pref] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:07.0: PCI bridge to [bus 04-05] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:07.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:05:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x000007ff pref] pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:04:00.0: PCI bridge to [bus 05-05] pci 0000:04:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:01:03.0: reg 10: [mem 0xd8000000-0xdfffffff pref] pci 0000:01:03.0: reg 14: [io 0x3000-0x30ff] pci 0000:01:03.0: reg 18: [mem 0xf7ff0000-0xf7ffffff] pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:03.0: supports D1 D2 pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff] pci 0000:01:04.0: reg 14: [mem 0xf7fe0000-0xf7fe01ff] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold pci 0000:01:04.0: PME# disabled pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff] pci 0000:01:04.2: reg 14: [mem 0xf7fd0000-0xf7fd07ff] pci 0000:01:04.2: reg 18: [mem 0xf7fc0000-0xf7fc3fff] pci 0000:01:04.2: reg 1c: [mem 0xf7f00000-0xf7f7ffff] pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold pci 0000:01:04.2: PME# disabled pci 0000:01:04.4: reg 20: [io 0x3800-0x381f] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold pci 0000:01:04.4: PME# disabled pci 0000:01:04.6: reg 10: [mem 0xf7ef0000-0xf7ef00ff] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold pci 0000:01:04.6: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xf7e00000-0xf7ffffff] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT] ACPI Warning for \_SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20090903/nspredef-440) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.P2P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07.NB02._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) Unable to assume _OSC PCIe control. Disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11) vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:03.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 PNP0a08 (active) pnp 00:01: [io 0x0070-0x0077] pnp 00:01: [io 0x0408-0x040f] pnp 00:01: [io 0x04d0-0x04d1] pnp 00:01: [io 0x0020-0x003f] pnp 00:01: [io 0x00a0-0x00bf] pnp 00:01: [io 0x0090-0x009f] pnp 00:01: [io 0x0050-0x0053] pnp 00:01: [io 0x0700-0x071f] pnp 00:01: [io 0x0800-0x083f] pnp 00:01: [io 0x0900-0x097f] pnp 00:01: [io 0x0010-0x001f] pnp 00:01: [io 0x0c80-0x0c83] pnp 00:01: [io 0x0cd4-0x0cd7] pnp 00:01: [io 0x0f50-0x0f58] pnp 00:01: [io 0x00f0] pnp 00:01: [io 0x0ca0-0x0ca1] pnp 00:01: [io 0x0ca4-0x0ca5] pnp 00:01: [mem 0xe0000000-0xefffffff] pnp 00:01: [mem 0xfe000000-0xfebfffff] pnp 00:01: [io 0x02f8-0x02ff] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0ca2-0x0ca3] pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: [dma 7] pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0060] pnp 00:06: [io 0x0064] pnp 00:06: [irq 1] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:07: [irq 12] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) pnp 00:08: [io 0x002e-0x002f] pnp 00:08: [io 0x004e-0x004f] pnp 00:08: [io 0x0620-0x065f] pnp 00:08: [io 0x0680-0x069f] pnp 00:08: [io 0x0600-0x061f] pnp 00:08: [io 0x0660-0x067f] pnp 00:08: [io 0x0300-0x030f] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active) pnp 00:09: [irq 4] pnp 00:09: [io 0x03f8-0x03ff] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x0408-0x040f] has been reserved system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0700-0x071f] has been reserved system 00:01: [io 0x0800-0x083f] has been reserved system 00:01: [io 0x0900-0x097f] has been reserved system 00:01: [io 0x0c80-0x0c83] has been reserved system 00:01: [io 0x0cd4-0x0cd7] has been reserved system 00:01: [io 0x0f50-0x0f58] has been reserved system 00:01: [io 0x0ca0-0x0ca1] has been reserved system 00:01: [io 0x0ca4-0x0ca5] has been reserved system 00:01: [io 0x02f8-0x02ff] has been reserved system 00:01: [mem 0xe0000000-0xefffffff] has been reserved system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved PCI: max bus depth: 3 pci_try_num: 4 pci 0000:00:03.0: BAR 15: assigned [mem 0xd0000000-0xd00fffff pref] pci 0000:00:06.0: BAR 15: assigned [mem 0xd0100000-0xd01fffff pref] pci 0000:00:07.0: BAR 15: assigned [mem 0xd0200000-0xd02fffff pref] pci 0000:0a:00.0: PCI bridge to [bus 0b-0d] pci 0000:0a:00.0: PCI bridge to [bus 0b-0d] pci 0000:0a:00.0: bridge window [io disabled] pci 0000:0a:00.0: bridge window [mem disabled] pci 0000:0a:00.0: bridge window [mem pref disabled] pci 0000:0a:01.0: PCI bridge to [bus 0e-0e] pci 0000:0a:01.0: PCI bridge to [bus 0e-0e] pci 0000:0a:01.0: bridge window [io disabled] pci 0000:0a:01.0: bridge window [mem disabled] pci 0000:0a:01.0: bridge window [mem pref disabled] pci 0000:0a:02.0: PCI bridge to [bus 0f-0f] pci 0000:0a:02.0: PCI bridge to [bus 0f-0f] pci 0000:0a:02.0: bridge window [io disabled] pci 0000:0a:02.0: bridge window [mem disabled] pci 0000:0a:02.0: bridge window [mem pref disabled] pci 0000:09:00.0: PCI bridge to [bus 0a-0f] pci 0000:09:00.0: PCI bridge to [bus 0a-0f] pci 0000:09:00.0: bridge window [io disabled] pci 0000:09:00.0: bridge window [mem disabled] pci 0000:09:00.0: bridge window [mem pref disabled] pci 0000:09:00.3: PCI bridge to [bus 10-12] pci 0000:09:00.3: PCI bridge to [bus 10-12] pci 0000:09:00.3: bridge window [io disabled] pci 0000:09:00.3: bridge window [mem disabled] pci 0000:09:00.3: bridge window [mem pref disabled] pci 0000:00:02.0: PCI bridge to [bus 09-12] pci 0000:00:02.0: PCI bridge to [bus 09-12] pci 0000:00:02.0: bridge window [io disabled] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:00:02.0: bridge window [mem pref disabled] pci 0000:06:00.0: BAR 15: assigned [mem 0xd0000000-0xd00fffff pref] pci 0000:07:08.0: BAR 6: assigned [mem 0xd0000000-0xd0003fff pref] pci 0000:07:04.0: PCI bridge to [bus 08-08] pci 0000:07:04.0: PCI bridge to [bus 08-08] pci 0000:07:04.0: bridge window [io disabled] pci 0000:07:04.0: bridge window [mem disabled] pci 0000:07:04.0: bridge window [mem pref disabled] pci 0000:06:00.0: PCI bridge to [bus 07-08] pci 0000:06:00.0: PCI bridge to [bus 07-08] pci 0000:06:00.0: bridge window [io 0x4000-0x4fff] pci 0000:06:00.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:06:00.0: bridge window [mem 0xd0000000-0xd00fffff pref] pci 0000:00:03.0: PCI bridge to [bus 06-08] pci 0000:00:03.0: PCI bridge to [bus 06-08] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xd00fffff pref] pci 0000:00:04.0: PCI bridge to [bus 13-15] pci 0000:00:04.0: PCI bridge to [bus 13-15] pci 0000:00:04.0: bridge window [io disabled] pci 0000:00:04.0: bridge window [mem disabled] pci 0000:00:04.0: bridge window [mem pref disabled] pci 0000:00:05.0: PCI bridge to [bus 16-16] pci 0000:00:05.0: PCI bridge to [bus 16-16] pci 0000:00:05.0: bridge window [io disabled] pci 0000:00:05.0: bridge window [mem disabled] pci 0000:00:05.0: bridge window [mem pref disabled] pci 0000:02:00.0: BAR 15: assigned [mem 0xd0100000-0xd01fffff pref] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0100000-0xd01007ff pref] pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: bridge window [io disabled] pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:02:00.0: bridge window [mem 0xd0100000-0xd01fffff pref] pci 0000:00:06.0: PCI bridge to [bus 02-03] pci 0000:00:06.0: PCI bridge to [bus 02-03] pci 0000:00:06.0: bridge window [io disabled] pci 0000:00:06.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:06.0: bridge window [mem 0xd0100000-0xd01fffff pref] pci 0000:04:00.0: BAR 15: assigned [mem 0xd0200000-0xd02fffff pref] pci 0000:05:00.0: BAR 6: assigned [mem 0xd0200000-0xd02007ff pref] pci 0000:04:00.0: PCI bridge to [bus 05-05] pci 0000:04:00.0: PCI bridge to [bus 05-05] pci 0000:04:00.0: bridge window [io disabled] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:04:00.0: bridge window [mem 0xd0200000-0xd02fffff pref] pci 0000:00:07.0: PCI bridge to [bus 04-05] pci 0000:00:07.0: PCI bridge to [bus 04-05] pci 0000:00:07.0: bridge window [io disabled] pci 0000:00:07.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:00:07.0: bridge window [mem 0xd0200000-0xd02fffff pref] pci 0000:01:03.0: BAR 6: assigned [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:04.2: BAR 6: assigned [mem 0xf7e20000-0xf7e2ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xf7e00000-0xf7ffffff] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] pci 0000:00:02.0: setting latency timer to 64 pci 0000:09:00.0: setting latency timer to 64 alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:0a:00.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:0a:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:0a:01.0: setting latency timer to 64 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:0a:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:0a:02.0: setting latency timer to 64 pci 0000:09:00.3: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:06:00.0: setting latency timer to 64 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: setting latency timer to 64 pci 0000:02:00.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xdfffffff] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff] pci_bus 0000:09: resource 1 [mem 0xfdf00000-0xfdffffff] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff pref] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff] pci_bus 0000:07: resource 1 [mem 0xfde00000-0xfdefffff] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff pref] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf9ffffff] pci_bus 0000:02: resource 2 [mem 0xd0100000-0xd01fffff pref] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf9ffffff] pci_bus 0000:03: resource 2 [mem 0xd0100000-0xd01fffff pref] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbffffff] pci_bus 0000:04: resource 2 [mem 0xd0200000-0xd02fffff pref] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff] pci_bus 0000:05: resource 2 [mem 0xd0200000-0xd02fffff pref] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7ffffff] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 7 [mem 0xd0000000-0xdfffffff] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1d.0: PCI INT A disabled pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1d.1: PCI INT B disabled pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1d.2: PCI INT C disabled alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1d.3: PCI INT D disabled pci 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1d.7: PCI INT A disabled pci 0000:00:1f.0: rerouting interrupts for [8086:2670] pci 0000:01:03.0: Boot video device alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 pci 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22 pci 0000:01:04.4: PCI INT B disabled Trying to unpack rootfs image as initramfs... Freeing initrd memory: 15823k freed platform rtc_cmos: registered platform RTC device (no PNP device found) audit: initializing netlink socket (disabled) type=2000 audit(1380086382.463:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 15729 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 2731FE4BFA852F66 - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 intel_idle: MWAIT substates: 0x20 intel_idle: does not run on family 6 model 15 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding ACPI-specified kcs state machine ipmi_si: Adding SMBIOS-specified kcs state machine: duplicate interface alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ipmi_si: Adding PCI-specified kcs state machine ipmi_si: Adding ACPI-specified kcs state machine: duplicate interface ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 21 IRQ 21/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs Using irq 21 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x11) IPMI kcs interface initialized input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ACPI: SSDT 00000000cfe4f800 000AD (v01 HP CPU0CST 00000001 INTL 20061109) ACPI: SSDT 00000000cfe4f900 000AD (v01 HP CPU1CST 00000001 INTL 20061109) ACPI: SSDT 00000000cfe4fe00 000AD (v01 HP CPU6CST 00000001 INTL 20061109) ACPI: SSDT 00000000cfe4ff00 000AD (v01 HP CPU7CST 00000001 INTL 20061109) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (8 C) [Firmware Bug]: APEI: Invalid bit width + offset in GAR [0xe8028/64/0/2/0] GHES: APEI firmware first mode is enabled by WHEA _OSC. Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input1 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:01:04.4 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos rtc_cmos: RTC can wake from S4 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos rtc_cmos: setting system clock to 2013-09-25 05:19:43 UTC (1380086383) Initalizing network drop monitor service Freeing unused kernel memory: 1264k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 900k freed Freeing unused kernel memory: 1672k freed dracut: dracut-004-303.el6 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com udev: starting version 147 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 radeon 0000:01:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB). [drm] register mmio base: 0xF7FF0000 [drm] register mmio size: 65536 radeon 0000:01:03.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (32M used) radeon 0000:01:03.0: GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 4028684 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 32M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCI GART of 512M enabled (table at 0x0000000037880000). radeon 0000:01:03.0: WB disabled radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000b8000000 and cpu addr 0xffff880037834000 [drm] Loading R100 Microcode platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin [drm] radeon: ring at 0x00000000B8001000 [drm] ring test succeeded in 1 usecs Refined TSC clocksource calibration: 3000.106 MHz. Switching to clocksource tsc usb 6-1: new full speed USB device number 2 using uhci_hcd usb 6-1: New USB device found, idVendor=03f0, idProduct=1027 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: Virtual Keyboard usb 6-1: Manufacturer: HP usb 6-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input2 generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input3 generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA-1 [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] VGA-2 [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] fb mappable at 0xD8040000 [drm] vram apper at 0xD8000000 [drm] size 786432 [drm] fb depth is 8 [drm] pitch is 1024 fbcon: radeondrmfb (fb0) is primary device usb 3-1: new full speed USB device number 2 using uhci_hcd Console: switching to colour frame buffer device 128x48 fb0: radeondrmfb frame buffer device drm: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready [drm] Initialized radeon 2.22.0 20080528 for 0000:01:03.0 on minor 0 usb 3-1: New USB device found, idVendor=046e, idProduct=5400 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Data Desk usb 3-1: Manufacturer: ALCOR usb 3-1: configuration #1 chosen from 1 choice hub 3-1:1.0: USB hub found hub 3-1:1.0: 3 ports detected dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 usb 3-1.1: new full speed USB device number 3 using uhci_hcd ata1.00: ATAPI: HL-DT-ST GCR-8240N, 2.03, max MWDMA2 ata1.00: configured for MWDMA2 scsi 0:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8240N 2.03 PQ: 0 ANSI: 5 usb 3-1.1: New USB device found, idVendor=046e, idProduct=5300 usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.1: Product: Data Desk usb 3-1.1: Manufacturer: ALCOR usb 3-1.1: configuration #1 chosen from 1 choice input: ALCOR Data Desk as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input4 generic-usb 0003:046E:5300.0003: input,hidraw2: USB HID v1.00 Keyboard [ALCOR Data Desk ] on usb-0000:00:1d.1-1.1/input0 input: ALCOR Data Desk as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input5 generic-usb 0003:046E:5300.0004: input,hiddev96,hidraw3: USB HID v1.00 Device [ALCOR Data Desk ] on usb-0000:00:1d.1-1.1/input1 HP CISS Driver (v 3.6.28-RH1) cciss 0000:07:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 alloc irq_desc for 48 on node -1 alloc kstat_irqs on node -1 cciss 0000:07:08.0: irq 48 for MSI/MSI-X usb 3-1.3: new low speed USB device number 4 using uhci_hcd cciss 0000:07:08.0: cciss0: <0x3238> at PCI 0000:07:08.0 IRQ 48 using DAC cciss/c0d0: p1 p2 p3 sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 usb 3-1.3: New USB device found, idVendor=0a09, idProduct=0001 usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.3: Product: Datadesk Trackball usb 3-1.3: Manufacturer: Datadesk Tec. usb 3-1.3: configuration #1 chosen from 1 choice input: Datadesk Tec. Datadesk Trackball as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3:1.0/input/input6 generic-usb 0003:0A09:0001.0005: input,hidraw4: USB HID v1.00 Mouse [Datadesk Tec. Datadesk Trackball] on usb-0000:00:1d.1-1.3/input0 EXT4-fs (cciss!c0d0p3): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/cciss/c0d0p3 SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1380086385.796:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root readahead: starting udev: starting version 147 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 EDAC MC: Ver: 2.1.0 Aug 27 2013 EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) intel_rng: FWH not detected iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS sr 0:0:0:0: Attached scsi generic sg0 type 5 microcode: CPU0 sig=0x6f6, pf=0x4, revision=0xd2 platform microcode: firmware: requesting intel-ucode/06-0f-06 microcode: CPU1 sig=0x6f6, pf=0x4, revision=0xd2 platform microcode: firmware: requesting intel-ucode/06-0f-06 microcode: CPU2 sig=0x6f6, pf=0x4, revision=0xd2 platform microcode: firmware: requesting intel-ucode/06-0f-06 microcode: CPU3 sig=0x6f6, pf=0x4, revision=0xd2 platform microcode: firmware: requesting intel-ucode/06-0f-06 Microcode Update Driver: v2.00 , Peter Oruba hpwdt 0000:01:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 hpwdt: New timer passed in is 30 seconds. hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF), priority: LAST (default = 0/LAST). hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.3.0, timer margin: 30 seconds (nowayout=0). hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012) bnx2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 18, node addr xx:xx:xx:xx:xx:xx bnx2 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw bnx2 0000:05:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 19, node addr xx:xx:xx:xx:xx:xx EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode. Opts: Adding 2097144k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:2097144k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team alloc irq_desc for 49 on node -1 alloc kstat_irqs on node -1 bnx2 0000:03:00.0: irq 49 for MSI/MSI-X bnx2 0000:03:00.0: eth0: using MSI ADDRCONF(NETDEV_UP): eth0: link is not ready bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible. p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. usb 3-1: USB disconnect, device number 2 usb 3-1.1: USB disconnect, device number 3 usb 3-1.3: USB disconnect, device number 4