processor : 0 cpu : 740/750 temperature : 35-37 C (uncalibrated) clock : 266.666664MHz revision : 3.0 (pvr 0008 0300) bogomips : 33.32 timebase : 16664066 platform : PowerMac model : iMac,1 machine : iMac,1 motherboard : iMac MacRISC Power Macintosh detected as : 79 (Unknown Paddington-based) pmac flags : 00000000 L2 cache : 512K unified pmac-generation : NewWorld Memory : 256 MB -[0000:00]-+-00.0 Motorola MPC106 [Grackle] [1057:0002] +-10.0 Apple Inc. Paddington Mac I/O [106b:0017] +-12.0 Advanced Micro Devices [AMD] nee ATI 3D Rage Pro 215GP [1002:4750] \-14.0 OPTi Inc. 82C861 [1045:c861] [ 0.000000] Using PowerMac machine description [ 0.000000] Cannot reserve gpages without hugetlb enabled [ 0.000000] Total memory = 256MB; using 512kB for hash table (at c7f80000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-powerpc (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.60-1+deb7u3 [ 0.000000] Found initrd at 0xc1400000:0xc1e67c00 [ 0.000000] Found a Paddington mac-io controller, rev: 0, mapped at 0xff780000 [ 0.000000] PowerMac motherboard: Unknown Paddington-based [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@80000000 (primary) ranges: [ 0.000000] IO 0x00000000fe000000..0x00000000fe7fffff -> 0x0000000000000000 [ 0.000000] MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000 [ 0.000000] Removing ISA hole at 0x00000000fd000000 [ 0.000000] nvram: OF partition at 0x140 [ 0.000000] nvram: XP partition at 0x11b0 [ 0.000000] nvram: NR partition at 0x12b0 [ 0.000000] Top of RAM: 0x10000000, Total RAM: 0x10000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00010000 [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00010000 [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c055ac10, node_mem_map c06ea000 [ 0.000000] DMA zone: 512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65024 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx ro [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] High memory: 0k [ 0.000000] Memory: 241480k/262144k available (5224k kernel code, 20664k reserved, 320k data, 1512k bss, 244k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffcf000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfee9b000..0xff800000 : early ioremap [ 0.000000] * 0xd1000000..0xfee9b000 : vmalloc & ioremap [ 0.000000] NR_IRQS:512 [ 0.000000] irq: Found primary Apple PIC /pci@80000000/mac-io@10 for 64 irqs [ 0.000000] irq: System has 64 possible interrupts [ 0.000000] GMT Delta read from XPRAM: 540 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 16.664066 MHz [ 0.000000] time_init: processor frequency = 266.666664 MHz [ 0.000000] clocksource: timebase mult[f00996b] shift[22] registered [ 0.000000] clockevent: decrementer mult[44418a2] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] pmac_zilog: serial modem detected [ 0.002704] pid_max: default: 32768 minimum: 301 [ 0.002970] Security Framework initialized [ 0.003044] AppArmor: AppArmor disabled by boot time parameter [ 0.003146] Mount-cache hash table entries: 512 [ 0.004022] device-tree: Duplicate name in /cpus/PowerPC,750@0, renamed to "l2-cache#1" [ 0.007370] Initializing cgroup subsys cpuacct [ 0.007448] Initializing cgroup subsys memory [ 0.007541] Initializing cgroup subsys devices [ 0.007574] Initializing cgroup subsys freezer [ 0.007607] Initializing cgroup subsys net_cls [ 0.007639] Initializing cgroup subsys blkio [ 0.007700] Initializing cgroup subsys perf_event [ 0.010859] devtmpfs: initialized [ 0.013008] print_constraints: dummy: [ 0.013458] NET: Registered protocol family 16 [ 0.015720] PCI: Probing PCI hardware [ 0.016103] pci 0000:00:00.0: [1057:0002] type 0 class 0x000600 [ 0.016294] pci 0000:00:10.0: [106b:0017] type 0 class 0x00ff00 [ 0.016341] pci 0000:00:10.0: reg 10: [mem 0x80800000-0x8087ffff] [ 0.016465] pci 0000:00:12.0: [1002:4750] type 0 class 0x000300 [ 0.016503] pci 0000:00:12.0: reg 10: [mem 0x81000000-0x81ffffff] [ 0.016534] pci 0000:00:12.0: reg 14: [io 0x0c00-0x0cff] [ 0.016566] pci 0000:00:12.0: reg 18: [mem 0x80881000-0x80881fff] [ 0.016619] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.016712] pci 0000:00:14.0: [1045:c861] type 0 class 0x000c03 [ 0.016749] pci 0000:00:14.0: reg 10: [mem 0x80880000-0x80880fff] [ 0.018025] PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff] [ 0.018053] PCI: max bus depth: 0 pci_try_num: 1 [ 0.018107] pci 0000:00:12.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref] [ 0.018172] pci_bus 0000:00: resource 0 [io 0x0000-0x7fffff] [ 0.018197] pci_bus 0000:00: resource 1 [mem 0x80000000-0xfcffffff] [ 0.023268] bio: create slab at 0 [ 0.024145] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=mem,locks=none [ 0.024206] vgaarb: loaded [ 0.024253] vgaarb: bridge control possible 0000:00:12.0 [ 0.025034] SCSI subsystem initialized [ 0.025404] libata version 3.00 loaded. [ 0.026444] Switching to clocksource timebase [ 0.056836] NET: Registered protocol family 2 [ 0.057462] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.058991] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.059690] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.060071] TCP: Hash tables configured (established 8192 bind 8192) [ 0.060128] TCP reno registered [ 0.060171] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.060265] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.060931] NET: Registered protocol family 1 [ 0.061195] PCI: CLS 32 bytes, default 32 [ 0.061729] Unpacking initramfs... [ 2.024494] Freeing initrd memory: 10656k freed [ 2.029500] Thermal assist unit using timers, shrink_timer: 500 jiffies [ 2.032426] audit: initializing netlink socket (disabled) [ 2.032581] type=2000 audit(1411088535.027:1): initialized [ 2.122946] VFS: Disk quotas dquot_6.5.2 [ 2.123178] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.123483] msgmni has been set to 494 [ 2.124698] alg: No test for stdrng (krng) [ 2.124943] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.125021] io scheduler noop registered [ 2.125059] io scheduler deadline registered [ 2.125140] io scheduler cfq registered (default) [ 2.125896] atyfb 0000:00:12.0: enabling device (0086 -> 0087) [ 2.125985] atyfb: using auxiliary register aperture [ 2.126654] atyfb: 3D RAGE PRO (Mach64 GP, PQFP, PCI) [0x4750 rev 0x7c] [ 2.126755] atyfb: 6M SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK, 100 MHz XCLK [ 2.127372] atyfb: monitor sense=73f, mode 6 [ 2.192534] Console: switching to colour frame buffer device 128x48 [ 2.213443] atyfb: fb0: ATY Mach64 frame buffer device on PCI [ 2.215108] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.217100] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 2.217494] ttyPZ0 at MMIO 0x80813020 (irq = 16) is a Z85c30 ESCC - Internal modem [ 2.218220] ttyPZ1 at MMIO 0x80813000 (irq = 17) is a Z85c30 ESCC - Infrared port [ 2.219004] Serial: MPC52xx PSC UART driver [ 2.219503] Generic non-volatile memory driver v1.1 [ 2.219995] Linux agpgart interface v0.103 [ 2.220450] MacIO PCI driver attached to Paddington chipset [ 2.222696] swim3 0.00015000:fdc: [fd0] SWIM3 floppy controller [ 2.227076] Macintosh CUDA driver v0.5 for Unified ADB. [ 2.228609] adb: starting probe task... [ 2.281278] adb devices: [ 2.282359] adb: finished probe task... [ 3.246575] pata-macio 0.00020000:ide: Activating pata-macio chipset Heathrow ATA, Apple bus ID 0 [ 3.248395] scsi0 : pata_macio [ 3.249147] ata1: PATA max MWDMA2 irq 29 [ 3.411039] ata1.00: ATA-7: SAMSUNG SP1203N, TL100-31, max UDMA/100 [ 3.411352] ata1.00: 234493056 sectors, multi 0: LBA48 [ 3.418945] ata1.00: configured for MWDMA2 [ 3.419964] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1203N TL10 PQ: 0 ANSI: 5 [ 4.266571] pata-macio 0.00021000:ide: Activating pata-macio chipset Heathrow ATA, Apple bus ID 1 [ 4.268368] scsi1 : pata_macio [ 4.268929] ata2: PATA max MWDMA2 irq 31 [ 4.280518] mousedev: PS/2 mouse device common for all mice [ 4.292739] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 4.305209] TCP cubic registered [ 4.316095] NET: Registered protocol family 10 [ 4.330758] Mobile IPv6 [ 4.341425] NET: Registered protocol family 17 [ 4.352050] Registering the dns_resolver key type [ 4.363627] PM: Hibernation image not present or could not be loaded. [ 4.363716] registered taskstats version 1 [ 4.375541] rtc-generic rtc-generic: setting system clock to 2014-09-19 10:02:17 UTC (1411120937) [ 4.386450] Initializing network drop monitor service [ 4.442870] ata2.00: ATAPI: MATSHITA CR-175, 5ADD, max MWDMA2 [ 4.458834] ata2.00: configured for MWDMA2 [ 4.472300] scsi 1:0:0:0: CD-ROM MATSHITA CD-ROM CR-175 5ADD PQ: 0 ANSI: 5 [ 4.486386] Freeing unused kernel memory: 244k freed [ 4.647559] udevd[46]: starting version 175 [ 5.570873] mesh: configured for synchronous 5 MB/s [ 5.831401] sd 0:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/111 GiB) [ 5.855440] usbcore: registered new interface driver usbfs [ 5.887413] sd 0:0:0:0: [sda] Write Protect is off [ 5.898665] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.914873] usbcore: registered new interface driver hub [ 5.947942] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.974670] usbcore: registered new device driver usb [ 6.026368] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 [ 6.092215] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.156980] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.197795] eth0: BMAC+ at xx:xx:xx:xx:xx:xx [ 6.221245] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.238171] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.258625] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.273415] ohci_hcd 0000:00:14.0: OHCI Host Controller [ 6.307063] ohci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 6.323802] ohci_hcd 0000:00:14.0: irq 28, io mem 0x80880000 [ 6.374195] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 6.385908] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.401965] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.413754] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.425532] usb usb1: Product: OHCI Host Controller [ 6.437068] usb usb1: Manufacturer: Linux 3.2.0-4-powerpc ohci_hcd [ 6.448505] usb usb1: SerialNumber: 0000:00:14.0 [ 6.460087] mesh: performing initial bus reset... [ 6.477082] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.556002] hub 1-0:1.0: USB hub found [ 6.676888] hub 1-0:1.0: 2 ports detected [ 7.154717] usb 1-2: new full-speed USB device number 2 using ohci_hcd [ 7.383754] usb 1-2: New USB device found, idVendor=05ac, idProduct=1002 [ 7.395442] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.406745] usb 1-2: Product: Hub in Apple Extended USB Keyboard [ 7.417897] usb 1-2: Manufacturer: Mitsumi Electric [ 7.440055] hub 1-2:1.0: USB hub found [ 7.476807] hub 1-2:1.0: 3 ports detected [ 7.796594] usb 1-2.1: new full-speed USB device number 3 using ohci_hcd [ 7.915454] usb 1-2.1: New USB device found, idVendor=05ac, idProduct=0206 [ 7.926542] usb 1-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 7.937603] usb 1-2.1: Product: Apple Extended USB Keyboard [ 7.948628] usb 1-2.1: Manufacturer: Mitsumi Electric [ 8.048680] usb 1-2.2: new low-speed USB device number 4 using ohci_hcd [ 8.086653] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input0 [ 8.132061] generic-usb 0003:05AC:0206.0001: input,hidraw0: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:14.0-2.1/input0 [ 8.171459] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input1 [ 8.196512] generic-usb 0003:05AC:0206.0002: input,hidraw1: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:14.0-2.1/input1 [ 8.223941] usbcore: registered new interface driver usbhid [ 8.236792] usbhid: USB HID core driver [ 8.293344] usb 1-2.2: New USB device found, idVendor=05ac, idProduct=0306 [ 8.306261] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.318945] usb 1-2.2: Product: Apple Optical USB Mouse [ 8.331404] usb 1-2.2: Manufacturer: Logitech [ 8.370619] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input2 [ 8.412341] generic-usb 0003:05AC:0306.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:14.0-2.2/input0 [ 10.474641] scsi2 : MESH [ 10.514690] scsi: waiting for bus probes to complete ... [ 12.872932] PM: Starting manual resume from disk [ 12.885801] PM: Hibernation image partition 8:11 present [ 12.885818] PM: Looking for hibernation image. [ 12.911151] PM: Image not found (code -22) [ 12.911172] PM: Hibernation image not present or could not be loaded. [ 13.182850] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 16.395926] udevd[272]: starting version 175 [ 38.802215] Adding 535504k swap on /dev/sda11. Priority:-1 extents:1 across:535504k [ 38.990402] EXT4-fs (sda9): re-mounted. Opts: (null) [ 39.858281] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro [ 40.411034] loop: module loaded [ 41.078781] input: PowerMac Beep as /devices/pci0000:00/0000:00:10.0/input/input3 [ 47.803413] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null) [ 51.610684] phy registers: [ 51.612036] 1400 782d 7810 0001 00a1 cde1 0009 0000 [ 51.634288] 0000 0000 0000 0000 0000 0000 0000 0000 [ 51.656082] 0000 0000 4000 0000 2ffb 0010 0000 0002 [ 51.677482] 0001 0000 0000 0000 0000 0000 0000 0000 [ 52.279217] RPC: Registered named UNIX socket transport module. [ 52.290532] RPC: Registered udp transport module. [ 52.301744] RPC: Registered tcp transport module. [ 52.312850] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 52.408839] FS-Cache: Loaded [ 52.633243] FS-Cache: Netfs 'nfs' registered for caching [ 52.753919] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 62.722573] eth0: no IPv6 routers present [ 78.786171] input: Mouseemu virtual keyboard as /devices/virtual/input/input4 [ 78.800923] input: Mouseemu virtual mouse as /devices/virtual/input/input5