processor  : 0
vendor     : GenuineIntel
arch       : IA-64
family     : 31
model      : 0
model name : McKinley
revision   : 7
archrev    : 0
features   : branchlong
cpu number : 0
cpu regs   : 4
cpu MHz    : 900.000
itc MHz    : 900.000000
BogoMIPS   : 1347.58
siblings   : 1
physical id: 0

00:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA controller])
	Subsystem: ATI Technologies Inc Device 010a
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 192 (2000ns min), Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 57
	Region 0: Memory at 80000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 0d00 [size=256]
	Region 2: Memory at 88020000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at 88000000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
		Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

a0:01.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation Hama USB 2.0 CardBus
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128 (250ns min, 10500ns max), Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 51
	Region 0: Memory at d0022000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ohci_hcd

a0:01.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation Hama USB 2.0 CardBus
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128 (250ns min, 10500ns max), Cache Line Size: 128 bytes
	Interrupt: pin B routed to IRQ 52
	Region 0: Memory at d0021000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ohci_hcd

a0:01.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
	Subsystem: NEC Corporation USB 2.0
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128 (4000ns min, 8500ns max), Cache Line Size: 128 bytes
	Interrupt: pin C routed to IRQ 53
	Region 0: Memory at d0020000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd

a0:02.0 IDE interface: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max)
	Interrupt: pin A routed to IRQ 56
	Region 0: I/O ports at a0e8 [size=8]
	Region 1: I/O ports at a0f4 [size=4]
	Region 2: I/O ports at a0e0 [size=8]
	Region 3: I/O ports at a0f0 [size=4]
	Region 4: I/O ports at a0d0 [size=16]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=3 PME-
	Kernel driver in use: pata_cmd64x

a0:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
	Subsystem: Hewlett-Packard Company Device 1274
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128 (63750ns min), Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 54
	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at a080 [size=64]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [e4] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=4096 OST=2
		Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
	Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Kernel driver in use: e1000

a0:04.0 Multimedia audio controller: Fortemedia, Inc Xwave QS3000A [FM801] (rev b2)
	Subsystem: Fortemedia, Inc FM801 PCI Audio
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128 (1000ns min, 10000ns max)
	Interrupt: pin A routed to IRQ 58
	Region 0: I/O ports at a000 [size=128]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: FM801

a0:04.1 Input device controller: Fortemedia, Inc Xwave QS3000A [FM801 game port] (rev b2)
	Subsystem: Fortemedia, Inc FM801 PCI Joystick
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128 (1000ns min, 10000ns max)
	Region 0: I/O ports at a0c0 [size=16]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1+,D2-,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: FM801_gameport

c0:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 66MHz  Ultra3 SCSI Adapter (rev 01)
	Subsystem: Hewlett-Packard Company Ultra160 SCSI [A7059A]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 55
	Region 0: I/O ports at c000 [size=256]
	Region 1: Memory at e0022000 (64-bit, non-prefetchable) [size=1K]
	Region 3: Memory at e0020000 (64-bit, non-prefetchable) [size=8K]
	Expansion ROM at e0000000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: sym53c8xx

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-mckinley (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 05:18:01 UTC 2013
[    0.000000] EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
[    0.000000] booting generic kernel on platform hpzx1
[    0.000000] PCDP: v0 at 0x3fb2c000
[    0.000000] ACPI: RSDP 000000003fb2e000 00028 (v02     HP)
[    0.000000] ACPI: XSDT 000000003fb2e02c 0007C (v01     HP   zx2000 00000000   HP 00000000)
[    0.000000] ACPI: FACP 000000003fb373e0 000F4 (v03     HP   zx2000 00000000   HP 00000000)
[    0.000000] ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20090903/tbfadt-526)
[    0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20090903/tbfadt-526)
[    0.000000] ACPI: DSDT 000000003fb2e0e0 05781 (v01     HP   zx2000 00000007 INTL 02012044)
[    0.000000] ACPI: FACS 000000003fb374d8 00040
[    0.000000] ACPI: SPCR 000000003fb37518 00050 (v01     HP   zx2000 00000000   HP 00000000)
[    0.000000] ACPI: DBGP 000000003fb37568 00034 (v01     HP   zx2000 00000000   HP 00000000)
[    0.000000] ACPI: APIC 000000003fb37628 00084 (v01     HP   zx2000 00000000   HP 00000000)
[    0.000000] ACPI: SPMI 000000003fb375a0 00050 (v04     HP   zx2000 00000000   HP 00000000)
[    0.000000] ACPI: CPEP 000000003fb375f0 00034 (v01     HP   zx2000 00000000   HP 00000000)
[    0.000000] ACPI: SSDT 000000003fb33870 00A14 (v01     HP   zx2000 00000006 INTL 02012044)
[    0.000000] ACPI: SSDT 000000003fb34290 022E2 (v01     HP   zx2000 00000006 INTL 02012044)
[    0.000000] ACPI: SSDT 000000003fb36580 00342 (v01     HP   zx2000 00000006 INTL 02012044)
[    0.000000] ACPI: SSDT 000000003fb368d0 00A16 (v01     HP   zx2000 00000006 INTL 02012044)
[    0.000000] ACPI: SSDT 000000003fb372f0 000EB (v01     HP   zx2000 00000006 INTL 02012044)
[    0.000000] ACPI: Local APIC address c0000000fee00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Initial ramdisk at: 0xe0000040fdf41000 (17114214 bytes)
[    0.000000] SAL 3.1: HP version 2.31
[    0.000000] SAL Platform features: None
[    0.000000] SAL: AP wakeup using external interrupt vector 0xff
[    0.000000] ACPI: Local APIC address c0000000fee00000
[    0.000000] GSI 47 (level, low) -> CPU 0 (0x0000) vector 48
[    0.000000] 1 CPUs available, 1 CPUs total
[    0.000000] MCA related initialization done
[    0.000000] Virtual mem_map starts at 0xa0007fffc7200000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000400 -> 0x00040000
[    0.000000]   Normal   0x00040000 -> 0x01040000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000400 -> 0x0000fd79
[    0.000000]     0: 0x0000fec0 -> 0x0000fecb
[    0.000000]     0: 0x01010000 -> 0x0102576d
[    0.000000]     0: 0x0102576e -> 0x0103ff4a
[    0.000000]     0: 0x0103ff59 -> 0x0103ff84
[    0.000000]     0: 0x0103ffa0 -> 0x0103fff2
[    0.000000] On node 0 totalpages: 260426
[    0.000000] free_area_init_node: node 0, pgdat e000000001300000, node_mem_map a0007fffc720e000
[    0.000000]   DMA zone: 893 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 62983 pages, LIFO batch:7
[    0.000000]   Normal zone: 57344 pages used for memmap
[    0.000000]   Normal zone: 139206 pages, LIFO batch:7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 202189
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/vmlinuz root=/dev/sda2  ro
[    0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes)
[    0.000000] Memory: 4120480k/4137840k available (7344k code, 46336k reserved, 3571k data, 736k init)
[    0.000000] Leaving McKinley Errata 9 workaround enabled
[    0.000000] SLUB: Genslabs=16, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=256
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1024
[    0.000000] CPU 0: base freq=200.000MHz, ITC ratio=9/2, ITC freq=900.000MHz+/-450ppm
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.004000] Calibrating delay loop... 1347.58 BogoMIPS (lpj=2695168)
[    0.096064] Security Framework initialized
[    0.096106] SELinux:  Disabled at boot.
[    0.096404] Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
[    0.101233] Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
[    0.103657] Mount-cache hash table entries: 1024
[    0.104152] Initializing cgroup subsys ns
[    0.104192] Initializing cgroup subsys cpuacct
[    0.104230] Initializing cgroup subsys devices
[    0.104267] Initializing cgroup subsys freezer
[    0.104303] Initializing cgroup subsys net_cls
[    0.104376] ACPI: Core revision 20090903
[    0.108872] Boot processor id 0x0/0x0
[    0.109024] Brought up 1 CPUs
[    0.109058] Total of 1 processors activated (1347.58 BogoMIPS).
[    0.109533] CPU0 attaching NULL sched-domain.
[    0.109734] devtmpfs: initialized
[    0.110168] DMI 2.3 present.
[    0.110625] regulator: core version 0.5
[    0.110761] NET: Registered protocol family 16
[    0.110979] ACPI: bus type pci registered
[    0.111840] bio: create slab <bio-0> at 0
[    0.112764] ACPI: EC: Look up EC in DSDT
[    0.124986] ACPI: Interpreter enabled
[    0.125022] ACPI: (supports S0 S5)
[    0.125105] ACPI: Using IOSAPIC for interrupt routing
[    0.452878] ACPI: No dock devices found.
[    0.475470] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.521367] pci 0000:00:00.0: reg 10 32bit mmio pref: [0x80000000-0x87ffffff]
[    0.521497] pci 0000:00:00.0: reg 14 io port: [0xd00-0xdff]
[    0.521625] pci 0000:00:00.0: reg 18 32bit mmio: [0x88020000-0x8802ffff]
[    0.522119] pci 0000:00:00.0: reg 30 32bit mmio pref: [0x88000000-0x8801ffff]
[    0.522222] pci 0000:00:00.0: Boot video device
[    0.523143] pci 0000:00:00.0: supports D1 D2
[    0.524290] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI0._PRT]
[    0.586517] ACPI: PCI Root Bridge [PCI4] (0000:80)
[    0.627829] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI4._PRT]
[    0.700887] ACPI: PCI Root Bridge [PCI5] (0000:a0)
[    0.752854] pci 0000:a0:01.0: reg 10 32bit mmio: [0xd0022000-0xd0022fff]
[    0.755150] pci 0000:a0:01.0: supports D1 D2
[    0.755156] pci 0000:a0:01.0: PME# supported from D0 D1 D2 D3hot
[    0.755294] pci 0000:a0:01.0: PME# disabled
[    0.756553] pci 0000:a0:01.1: reg 10 32bit mmio: [0xd0021000-0xd0021fff]
[    0.758845] pci 0000:a0:01.1: supports D1 D2
[    0.758850] pci 0000:a0:01.1: PME# supported from D0 D1 D2 D3hot
[    0.758987] pci 0000:a0:01.1: PME# disabled
[    0.760305] pci 0000:a0:01.2: reg 10 32bit mmio: [0xd0020000-0xd00200ff]
[    0.762596] pci 0000:a0:01.2: supports D1 D2
[    0.762601] pci 0000:a0:01.2: PME# supported from D0 D1 D2 D3hot
[    0.762739] pci 0000:a0:01.2: PME# disabled
[    0.764255] pci 0000:a0:02.0: reg 10 io port: [0xa0e8-0xa0ef]
[    0.764461] pci 0000:a0:02.0: reg 14 io port: [0xa0f4-0xa0f7]
[    0.764666] pci 0000:a0:02.0: reg 18 io port: [0xa0e0-0xa0e7]
[    0.764872] pci 0000:a0:02.0: reg 1c io port: [0xa0f0-0xa0f3]
[    0.765077] pci 0000:a0:02.0: reg 20 io port: [0xa0d0-0xa0df]
[    0.766622] pci 0000:a0:02.0: supports D1 D2
[    0.768405] pci 0000:a0:03.0: reg 10 32bit mmio: [0xd0000000-0xd001ffff]
[    0.768810] pci 0000:a0:03.0: reg 18 io port: [0xa080-0xa0bf]
[    0.771402] pci 0000:a0:03.0: PME# supported from D0 D3hot D3cold
[    0.771539] pci 0000:a0:03.0: PME# disabled
[    0.773005] pci 0000:a0:04.0: reg 10 io port: [0xa000-0xa07f]
[    0.775297] pci 0000:a0:04.0: supports D2
[    0.776503] pci 0000:a0:04.1: reg 10 io port: [0xa0c0-0xa0cf]
[    0.778796] pci 0000:a0:04.1: supports D1
[    0.778801] pci 0000:a0:04.1: PME# supported from D1 D3hot
[    0.778938] pci 0000:a0:04.1: PME# disabled
[    0.780864] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI5._PRT]
[    0.835139] ACPI: PCI Root Bridge [PCI6] (0000:c0)
[    0.876281] pci 0000:c0:01.0: reg 10 io port: [0xc000-0xc0ff]
[    0.876727] pci 0000:c0:01.0: reg 14 64bit mmio: [0xe0022000-0xe00223ff]
[    0.877173] pci 0000:c0:01.0: reg 1c 64bit mmio: [0xe0020000-0xe0021fff]
[    0.877619] pci 0000:c0:01.0: reg 30 32bit mmio pref: [0xe0000000-0xe001ffff]
[    0.878831] pci 0000:c0:01.0: supports D1 D2
[    0.880726] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI6._PRT]
[    0.924065] vgaarb: device added: PCI:0000:00:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.924124] vgaarb: loaded
[    0.985427] IOC: reserving 512Mb of IOVA space at 0x60000000 for agpgart
[    0.985478] IOC: zx1 2.2 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
[    1.106629] Switching to clocksource itc
[    1.106842] pnp: PnP ACPI init
[    1.106892] ACPI: bus type pnp registered
[    1.336082] GSI 45 (edge, high) -> CPU 0 (0x0000) vector 49
[    1.337829] GSI 46 (edge, high) -> CPU 0 (0x0000) vector 50
[    1.378473] pnp: PnP ACPI: found 8 devices
[    1.378510] ACPI: ACPI bus type pnp unregistered
[    1.378942] NET: Registered protocol family 2
[    1.379209] IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
[    1.380846] TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
[    1.390482] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
[    1.391740] TCP: Hash tables configured (established 524288 bind 65536)
[    1.391780] TCP reno registered
[    1.392028] NET: Registered protocol family 1
[    1.392386] GSI 38 (level, low) -> CPU 0 (0x0000) vector 51
[    1.392427] pci 0000:a0:01.0: PCI INT A -> GSI 38 (level, low) -> IRQ 51
[    1.392621] pci 0000:a0:01.0: PCI INT A disabled
[    1.392660] GSI 38 (level, low) -> CPU 0 (0x0000) vector 51 unregistered
[    1.392921] GSI 39 (level, low) -> CPU 0 (0x0000) vector 51
[    1.392960] pci 0000:a0:01.1: PCI INT B -> GSI 39 (level, low) -> IRQ 52
[    1.393152] pci 0000:a0:01.1: PCI INT B disabled
[    1.393190] GSI 39 (level, low) -> CPU 0 (0x0000) vector 51 unregistered
[    1.393489] GSI 40 (level, low) -> CPU 0 (0x0000) vector 51
[    1.393527] pci 0000:a0:01.2: PCI INT C -> GSI 40 (level, low) -> IRQ 53
[    1.393720] pci 0000:a0:01.2: PCI INT C disabled
[    1.393758] GSI 40 (level, low) -> CPU 0 (0x0000) vector 51 unregistered
[    1.393928] Unpacking initramfs...
[    2.351158] Freeing initrd memory: 16688kB freed
[    2.351733] perfmon: version 2.0 IRQ 238
[    2.351777] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
[    2.352469] perfmon: added sampling format default_format
[    2.352507] perfmon_default_smpl: default_format v2.0 registered
[    2.352754] audit: initializing netlink socket (disabled)
[    2.352817] type=2000 audit(1365399259.349:1): initialized
[    2.357585] HugeTLB registered 256 MB page size, pre-allocated 0 pages
[    2.360671] VFS: Disk quotas dquot_6.5.2
[    2.360838] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[    2.361093] msgmni has been set to 8080
[    2.361529] alg: No test for stdrng (krng)
[    2.361669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.361720] io scheduler noop registered
[    2.361755] io scheduler anticipatory registered
[    2.361790] io scheduler deadline registered
[    2.361949] io scheduler cfq registered (default)
[    2.362351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.362401] ACPI: Power Button [PWRF]
[    2.362530] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[    2.362579] ACPI: Sleep Button [SLPF]
[    2.363379] processor LNXCPU:00: registered as cooling_device0
[    2.569143] thermal LNXTHERM:01: registered as thermal_zone0
[    2.569190] ACPI: Thermal Zone [THM0] (27 C)
[    2.571965] Linux agpgart interface v0.103
[    2.662148] agpgart: HP ZX1 IOC: IOPDIR shared with sba_iommu
[    2.662564]  <NULL>: AGP aperture is 512M @ 0x60000000
[    2.662602] agpgart: Detected HP ZX1 HWP0003 AGP chipset (ioc=fed01000, lba=fed20000)
[    2.662685] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.663177] 00:05: ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A
[    2.664342] 00:06: ttyS1 at MMIO 0xff5e2000 (irq = 50) is a 16550A
[    2.664694] mice: PS/2 mouse device common for all mice
[    2.664845] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[    2.665773] TCP cubic registered
[    2.665810] NET: Registered protocol family 17
[    2.666019] registered taskstats version 1
[    2.672733] rtc-efi rtc-efi: setting system clock to 2013-04-08 05:34:20 UTC (1365399260)
[    2.672877] Freeing unused kernel memory: 736kB freed
[    2.709417] udev[45]: starting version 164
[    2.991431] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[    2.991480] Copyright (c) 1999-2006 Intel Corporation.
[    2.991836] GSI 42 (level, low) -> CPU 0 (0x0000) vector 51
[    2.991875] e1000 0000:a0:03.0: PCI INT A -> GSI 42 (level, low) -> IRQ 54
[    3.269806] e1000: 0000:a0:03.0: e1000_probe: (PCI:33MHz:32-bit) xx:xx:xx:xx:xx:xx
[    3.271227] SCSI subsystem initialized
[    3.301688] usbcore: registered new interface driver usbfs
[    3.301982] usbcore: registered new interface driver hub
[    3.302274] usbcore: registered new device driver usb
[    3.330136] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.371062] libata version 3.00 loaded.
[    3.374989] GSI 49 (level, low) -> CPU 0 (0x0000) vector 52
[    3.375035] sym53c8xx 0000:c0:01.0: PCI INT A -> GSI 49 (level, low) -> IRQ 55
[    3.527169] sym0: <1010-66> rev 0x1 at pci 0000:c0:01.0 irq 55
[    3.530096] sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
[    3.530137] sym0: open drain IRQ line driver, using on-chip SRAM
[    3.530175] sym0: using LOAD/STORE-based firmware.
[    3.530210] sym0: handling phase mismatch from SCRIPTS.
[    3.573562] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[    3.573711] GSI 40 (level, low) -> CPU 0 (0x0000) vector 53
[    3.573751] ehci_hcd 0000:a0:01.2: PCI INT C -> GSI 40 (level, low) -> IRQ 53
[    3.573898] ehci_hcd 0000:a0:01.2: EHCI Host Controller
[    3.573976] ehci_hcd 0000:a0:01.2: new USB bus registered, assigned bus number 1
[    3.577263] sym0: SCSI BUS has been reset.
[    3.582576] scsi0 : sym-2.2.3
[    3.597467] ehci_hcd 0000:a0:01.2: irq 53, io mem 0xd0020000
[    3.609289] ehci_hcd 0000:a0:01.2: USB 2.0 started, EHCI 0.95
[    3.609379] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.609419] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.609468] usb usb1: Product: EHCI Host Controller
[    3.609504] usb usb1: Manufacturer: Linux 2.6.32-5-mckinley ehci_hcd
[    3.609542] usb usb1: SerialNumber: 0000:a0:01.2
[    3.609839] usb usb1: configuration #1 chosen from 1 choice
[    3.609991] hub 1-0:1.0: USB hub found
[    3.610050] hub 1-0:1.0: 5 ports detected
[    3.610479] GSI 43 (level, low) -> CPU 0 (0x0000) vector 54
[    3.610520] pata_cmd64x 0000:a0:02.0: PCI INT A -> GSI 43 (level, low) -> IRQ 56
[    3.613344] scsi1 : pata_cmd64x
[    3.614522] scsi2 : pata_cmd64x
[    3.614652] ata1: PATA max UDMA/100 cmd 0xa0e8 ctl 0xa0f4 bmdma 0xa0d0 irq 56
[    3.614693] ata2: PATA max UDMA/100 cmd 0xa0e0 ctl 0xa0f0 bmdma 0xa0d8 irq 56
[    3.617444] pata_cmd64x: active 10 recovery 10 setup 3.
[    3.617613] pata_cmd64x: active 10 recovery 10 setup 3.
[    3.637995] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.638152] GSI 38 (level, low) -> CPU 0 (0x0000) vector 55
[    3.638192] ohci_hcd 0000:a0:01.0: PCI INT A -> GSI 38 (level, low) -> IRQ 51
[    3.638341] ohci_hcd 0000:a0:01.0: OHCI Host Controller
[    3.638403] ohci_hcd 0000:a0:01.0: new USB bus registered, assigned bus number 2
[    3.638496] ohci_hcd 0000:a0:01.0: irq 51, io mem 0xd0022000
[    4.215947] pata_cmd64x: active 10 recovery 10 setup 3.
[    4.216105] pata_cmd64x: active 10 recovery 10 setup 3.
[    4.216396] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    4.216437] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.216486] usb usb2: Product: OHCI Host Controller
[    4.216522] usb usb2: Manufacturer: Linux 2.6.32-5-mckinley ohci_hcd
[    4.216560] usb usb2: SerialNumber: 0000:a0:01.0
[    4.216876] usb usb2: configuration #1 chosen from 1 choice
[    4.217025] hub 2-0:1.0: USB hub found
[    4.217084] hub 2-0:1.0: 3 ports detected
[    4.217276] GSI 39 (level, low) -> CPU 0 (0x0000) vector 56
[    4.217315] ohci_hcd 0000:a0:01.1: PCI INT B -> GSI 39 (level, low) -> IRQ 52
[    4.217460] ohci_hcd 0000:a0:01.1: OHCI Host Controller
[    4.217510] ohci_hcd 0000:a0:01.1: new USB bus registered, assigned bus number 3
[    4.217587] ohci_hcd 0000:a0:01.1: irq 52, io mem 0xd0021000
[    4.780024] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.780066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.780115] usb usb3: Product: OHCI Host Controller
[    4.780151] usb usb3: Manufacturer: Linux 2.6.32-5-mckinley ohci_hcd
[    4.780189] usb usb3: SerialNumber: 0000:a0:01.1
[    4.780459] usb usb3: configuration #1 chosen from 1 choice
[    4.780600] hub 3-0:1.0: USB hub found
[    4.780656] hub 3-0:1.0: 2 ports detected
[    4.801859] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8160B, 0013, max UDMA/33
[    4.801936] pata_cmd64x: active 3 recovery 1 setup 1.
[    4.817753] ata2.00: configured for UDMA/33
[    4.818655] scsi: waiting for bus probes to complete ...
[    5.137295] usb 2-2: new low speed USB device using ohci_hcd and address 2
[    5.344635] usb 2-2: New USB device found, idVendor=0566, idProduct=3029
[    5.344677] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.345000] usb 2-2: configuration #1 chosen from 1 choice
[    5.377745] usbcore: registered new interface driver hiddev
[    5.384961] input: HID 0566:3029 as /devices/pci0000:a0/0000:a0:01.0/usb2/2-2/2-2:1.0/input/input2
[    5.385174] generic-usb 0003:0566:3029.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0566:3029] on usb-0000:a0:01.0-2/input0
[    5.396881] input: HID 0566:3029 as /devices/pci0000:a0/0000:a0:01.0/usb2/2-2/2-2:1.1/input/input3
[    5.397058] generic-usb 0003:0566:3029.0002: input,hidraw1: USB HID v1.11 Device [HID 0566:3029] on usb-0000:a0:01.0-2/input1
[    5.397148] usbcore: registered new interface driver usbhid
[    5.397814] usbhid: v2.6:USB HID core driver
[    6.581113] scsi 0:0:0:0: Direct-Access     SEAGATE  ST336706LW       HPS1 PQ: 0 ANSI: 2
[    6.581176] scsi target0:0:0: tagged command queuing enabled, command queue depth 16.
[    6.581234] scsi target0:0:0: Beginning Domain Validation
[    6.596084] scsi target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
[    6.608864] scsi target0:0:0: Ending Domain Validation
[   10.782828] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8160B 0013 PQ: 0 ANSI: 5
[   10.815705] sd 0:0:0:0: [sda] 71132960 512-byte logical blocks: (36.4 GB/33.9 GiB)
[   10.816973] sd 0:0:0:0: [sda] Write Protect is off
[   10.817014] sd 0:0:0:0: [sda] Mode Sense: 9f 00 10 08
[   10.820863] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   10.825114]  sda: sda1 sda2 sda3
[   10.858387] sd 0:0:0:0: [sda] Attached SCSI disk
[   10.890788] sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
[   10.890836] Uniform CD-ROM driver Revision: 3.20
[   10.891588] sr 2:0:0:0: Attached scsi CD-ROM sr0
[   10.905163] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.906007] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   11.542916] EXT4-fs (sda2): mounted filesystem with ordered data mode
[   12.747336] udev[329]: starting version 164
[   13.312902] gameport: FM801 is pci0000:a0:04.1/gameport0, io 0xa0c0, speed 698kHz
[   13.429987] [drm] Initialized drm 1.1.0 20060810
[   14.262211] [drm] radeon defaulting to userspace modesetting.
[   14.262595] GSI 16 (level, low) -> CPU 0 (0x0000) vector 57
[   14.262636] pci 0000:00:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 57
[   14.263835] [drm] Initialized radeon 1.32.0 20080528 for 0000:00:00.0 on minor 0
[   14.529221] Linux video capture interface: v2.00
[   14.702147] GSI 41 (level, low) -> CPU 0 (0x0000) vector 58
[   14.702195] FM801 0000:a0:04.0: PCI INT A -> GSI 41 (level, low) -> IRQ 58
[   15.159977] Adding 1503904k swap on /dev/sda3.  Priority:-1 extents:1 across:1503904k 
[   15.452797] loop: module loaded
[   17.085703] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   18.589542] NET: Registered protocol family 10
[   29.561287] eth0: no IPv6 routers present
[  467.073367] EFI Variables Facility v0.08 2004-May-17