processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 30 model name : Intel(R) Core(TM) i7 CPU 880 @ 3.07GHz stepping : 5 cpu MHz : 1200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6117.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 30 model name : Intel(R) Core(TM) i7 CPU 880 @ 3.07GHz stepping : 5 cpu MHz : 1200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 1 cpu cores : 4 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6117.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 30 model name : Intel(R) Core(TM) i7 CPU 880 @ 3.07GHz stepping : 5 cpu MHz : 1200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 2 cpu cores : 4 apicid : 4 initial apicid : 4 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6117.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 30 model name : Intel(R) Core(TM) i7 CPU 880 @ 3.07GHz stepping : 5 cpu MHz : 1200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 3 cpu cores : 4 apicid : 6 initial apicid : 6 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6117.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 4 vendor_id : GenuineIntel cpu family : 6 model : 30 model name : Intel(R) Core(TM) i7 CPU 880 @ 3.07GHz stepping : 5 cpu MHz : 1200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6117.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 5 vendor_id : GenuineIntel cpu family : 6 model : 30 model name : Intel(R) Core(TM) i7 CPU 880 @ 3.07GHz stepping : 5 cpu MHz : 1200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 1 cpu cores : 4 apicid : 3 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6117.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 6 vendor_id : GenuineIntel cpu family : 6 model : 30 model name : Intel(R) Core(TM) i7 CPU 880 @ 3.07GHz stepping : 5 cpu MHz : 1200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 2 cpu cores : 4 apicid : 5 initial apicid : 5 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6117.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 7 vendor_id : GenuineIntel cpu family : 6 model : 30 model name : Intel(R) Core(TM) i7 CPU 880 @ 3.07GHz stepping : 5 cpu MHz : 1200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 3 cpu cores : 4 apicid : 7 initial apicid : 7 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6117.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: -[0000:00]-+-00.0 Intel Corporation Core Processor DMI [8086:d131] +-03.0-[01]--+-00.0 Advanced Micro Devices [AMD] nee ATI Juniper [Radeon HD 5700 Series] [1002:68b8] | \-00.1 Advanced Micro Devices [AMD] nee ATI Juniper HDMI Audio [Radeon HD 5700 Series] [1002:aa58] +-08.0 Intel Corporation Core Processor System Management Registers [8086:d155] +-08.1 Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] +-08.2 Intel Corporation Core Processor System Control and Status Registers [8086:d157] +-08.3 Intel Corporation Core Processor Miscellaneous Registers [8086:d158] +-10.0 Intel Corporation Core Processor QPI Link [8086:d150] +-10.1 Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] +-16.0 Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] +-1a.0 Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] +-1b.0 Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] +-1c.0-[02]-- +-1c.1-[03]----00.0 VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] +-1c.5-[04]----00.0 Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] +-1d.0 Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] +-1e.0-[05]-- +-1f.0 Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b08] +-1f.2 Intel Corporation 82801 SATA Controller [RAID mode] [8086:2822] \-1f.3 Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] # dmidecode 2.11 SMBIOS 2.6 present. 53 structures occupying 1849 bytes. Table at 0x000FBAC0. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Dell Inc. Version: A05 Release Date: 07/08/2010 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 8192 kB Characteristics: PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.15 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Dell Inc. Product Name: Studio XPS 8100 Version: Not Specified Serial Number: XXXXXXX UUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX Wake-up Type: Power Switch SKU Number: Family: Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: Dell Inc. Product Name: 0G3HR7 Version: A00 Serial Number: ..XXXXXXXXXXXXX. Asset Tag: Features: Board is a hosting board Board is replaceable Location In Chassis: Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: Dell Inc. Type: Desktop Lock: Not Present Version: Not Specified Serial Number: XXXXXXX Asset Tag: Not Specified Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 Handle 0x0004, DMI type 4, 42 bytes Processor Information Socket Designation: CPU 1 Type: Central Processor Family: Other Manufacturer: Intel ID: E5 06 01 00 FF FB EB BF Version: Intel(R) Core(TM) i7 CPU 880 @ 3.07GHz Voltage: Unknown External Clock: 133 MHz Max Speed: 3066 MHz Current Speed: 3066 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Core Count: 4 Core Enabled: 4 Thread Count: 8 Characteristics: 64-bit capable Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1-Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Through Location: Internal Installed Size: 256 kB Maximum Size: 256 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: Parity System Type: Instruction Associativity: 4-way Set-associative Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2-Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Through Location: Internal Installed Size: 1024 kB Maximum Size: 1024 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 8-way Set-associative Handle 0x0007, DMI type 7, 19 bytes Cache Information Socket Designation: L3-Cache Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Write Back Location: Internal Installed Size: 8192 kB Maximum Size: 8192 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 16-way Set-associative Handle 0x0008, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA-1 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: SATA-1 External Connector Type: SAS/SATA Plug Receptacle Port Type: SATA Handle 0x0009, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA-2 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: SATA-2 External Connector Type: SAS/SATA Plug Receptacle Port Type: SATA Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA-3 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: SATA-3 External Connector Type: SAS/SATA Plug Receptacle Port Type: SATA Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA-4 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: SATA-4 External Connector Type: SAS/SATA Plug Receptacle Port Type: SATA Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: eSATA-1 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: eSATA-1 External Connector Type: SAS/SATA Plug Receptacle Port Type: SATA Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USB Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Other Port Type: USB Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Other Port Type: USB Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Other Port Type: USB Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB4 External Connector Type: Other Port Type: USB Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB5 External Connector Type: Other Port Type: USB Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB6 External Connector Type: Other Port Type: USB Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB7 External Connector Type: Other Port Type: USB Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB8 External Connector Type: Other Port Type: USB Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB9 External Connector Type: Other Port Type: USB Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB10 External Connector Type: Other Port Type: USB Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB11 External Connector Type: Other Port Type: USB Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB12 External Connector Type: Other Port Type: USB Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: USB13 External Connector Type: Other Port Type: USB Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: AUDIO External Connector Type: None Port Type: Audio Port Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: ETHERNET External Connector Type: RJ-45 Port Type: Network Port Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Null Internal Connector Type: None External Reference Designator: IEEE1394 External Connector Type: IEEE 1394 Port Type: Firewire (IEEE P1394) Handle 0x001E, DMI type 9, 17 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Short ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x001F, DMI type 9, 17 bytes System Slot Information Designation: PCIE1 Type: x1 PCI Express Current Usage: Available Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0020, DMI type 9, 17 bytes System Slot Information Designation: PCIE2 Type: x1 PCI Express Current Usage: Available Length: Short ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0021, DMI type 9, 17 bytes System Slot Information Designation: PCIE3 Type: x16 PCI Express Current Usage: In Use Length: Long ID: 4 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0022, DMI type 11, 5 bytes OEM Strings String 1: www.dell.com Handle 0x0023, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x0024, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 16 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0025, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x002FFFFFFFF Range Size: 12 GB Physical Array Handle: 0x0024 Partition Width: 4 Handle 0x0026, DMI type 17, 28 bytes Memory Device Array Handle: 0x0024 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: Not Specified Type: Other Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Samsung Serial Number: XXXXXXXX Asset Tag: 000210 Part Number: M378B5273CH0-CH9 Rank: 2 Handle 0x0027, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Device Handle: 0x0026 Memory Array Mapped Address Handle: 0x0025 Partition Row Position: 1 Interleaved Data Depth: 1 Handle 0x0028, DMI type 17, 28 bytes Memory Device Array Handle: 0x0024 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: DIMM2 Bank Locator: Not Specified Type: Other Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Kingston Serial Number: XXXXXXXX Asset Tag: 000510 Part Number: KP223C-ELD Rank: 4 Handle 0x0029, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00200000000 Ending Address: 0x0027FFFFFFF Range Size: 2 GB Physical Device Handle: 0x0028 Memory Array Mapped Address Handle: 0x0025 Partition Row Position: 1 Interleaved Data Depth: 1 Handle 0x002A, DMI type 17, 28 bytes Memory Device Array Handle: 0x0024 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: DIMM3 Bank Locator: Not Specified Type: Other Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Samsung Serial Number: XXXXXXXX Asset Tag: 000210 Part Number: M378B5273CH0-CH9 Rank: 2 Handle 0x002B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00100000000 Ending Address: 0x001FFFFFFFF Range Size: 4 GB Physical Device Handle: 0x002A Memory Array Mapped Address Handle: 0x0025 Partition Row Position: 1 Interleaved Data Depth: 1 Handle 0x002C, DMI type 17, 28 bytes Memory Device Array Handle: 0x0024 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: DIMM4 Bank Locator: Not Specified Type: Other Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Kingston Serial Number: XXXXXXXX Asset Tag: 000510 Part Number: KP223C-ELD Rank: 4 Handle 0x002D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00280000000 Ending Address: 0x002FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x002C Memory Array Mapped Address Handle: 0x0025 Partition Row Position: 1 Interleaved Data Depth: 1 Handle 0x002E, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x002F, DMI type 41, 11 bytes Onboard Device Reference Designation: To Be Filled By O.E.M. Type: Video Status: Enabled Type Instance: 0 Handle 0x0030, DMI type 41, 11 bytes Onboard Device Reference Designation: To Be Filled By O.E.M. Type: SCSI Controller Status: Disabled Type Instance: 0 Handle 0x0031, DMI type 129, 8 bytes OEM-specific Type Header and Data: 81 08 31 00 01 01 02 01 Strings: Intel_ASF Intel_ASF_001 Handle 0x0032, DMI type 208, 26 bytes OEM-specific Type Header and Data: D0 1A 32 00 02 01 FE 00 0D 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Handle 0x0033, DMI type 131, 64 bytes OEM-specific Type Header and Data: 83 40 33 00 37 00 00 00 00 00 00 00 00 00 00 00 F8 00 08 3B FF FF FF FF 00 00 00 00 00 00 06 00 B8 04 1F 00 00 00 00 00 C8 00 FF FF 00 00 00 00 00 00 00 00 32 00 00 00 76 50 72 6F 00 00 00 00 Handle 0x0034, DMI type 127, 4 bytes End Of Table Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-358.18.1.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Tue Aug 27 14:23:09 CDT 2013 Command line: ro root=UUID=ce823106-aeb4-4855-930f-d264b1d87941 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000095800 (usable) BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bd780000 (usable) BIOS-e820: 00000000bd780000 - 00000000bd78e000 (ACPI data) BIOS-e820: 00000000bd78e000 - 00000000bd7d0000 (ACPI NVS) BIOS-e820: 00000000bd7d0000 - 00000000bd7e0000 (reserved) BIOS-e820: 00000000bd7ed000 - 00000000be000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000340000000 (usable) DMI present. SMBIOS version 2.6 @ 0xFA220 DMI: Dell Inc. Studio XPS 8100/0G3HR7, BIOS A05 07/08/2010 e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x340000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-E7FFF write-through E8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask E00000000 write-back 1 base 200000000 mask F00000000 write-back 2 base 300000000 mask FC0000000 write-back 3 base 0C0000000 mask FC0000000 uncachable 4 base 0BE000000 mask FFE000000 uncachable 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 8GB, type WB reg 1, base: 8GB, range: 4GB, type WB reg 2, base: 12GB, range: 1GB, type WB reg 3, base: 3GB, range: 1GB, type UC reg 4, base: 3040MB, range: 32MB, type UC total RAM covered: 12256M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3040MB, range: 32MB, type UC reg 3, base: 4GB, range: 4GB, type WB reg 4, base: 8GB, range: 4GB, type WB reg 5, base: 12GB, range: 1GB, type WB e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbd780 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bd780000 0000000000 - 00bd600000 page 2M 00bd600000 - 00bd780000 page 4k kernel direct mapping tables up to bd780000 @ 8000-d000 init_memory_mapping: 0000000100000000-0000000340000000 0100000000 - 0340000000 page 2M kernel direct mapping tables up to 340000000 @ b000-19000 RAMDISK: 37077000 - 37fefd47 ACPI: RSDP 00000000000f9b00 00024 (v02 ACPIAM) ACPI: XSDT 00000000bd780100 0006C (v01 DELL FX09 20100708 MSFT 00000097) ACPI: FACP 00000000bd780290 000F4 (v04 DELL FX09 20100708 MSFT 00000097) ACPI: DSDT 00000000bd780660 05B85 (v02 1AAAA 1AAAA000 00000000 INTL 20051117) ACPI: FACS 00000000bd78e000 00040 ACPI: APIC 00000000bd780390 0008C (v02 DELL FX09 20100708 MSFT 00000097) ACPI: MCFG 00000000bd780420 0003C (v01 DELL OEMMCFG 20100708 MSFT 00000097) ACPI: SLIC 00000000bd780460 00176 (v01 DELL FX09 20100708 MSFT 00000097) ACPI: OSFR 00000000bd7805e0 00080 (v01 DELL FX09 20100708 MSFT 00000097) ACPI: OEMB 00000000bd78e040 00072 (v01 DELL FX09 20100708 MSFT 00000097) ACPI: HPET 00000000bd78a660 00038 (v01 DELL OEMHPET 20100708 MSFT 00000097) ACPI: ASF! 00000000bd78a6a0 00099 (v32 LEGEND I865PASF 00000001 INTL 20051117) ACPI: SSDT 00000000bd790fb0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. No NUMA configuration found Faking a node at 0000000000000000-0000000340000000 Bootmem setup node 0 0000000000000000-0000000340000000 NODE_DATA [0000000000014000 - 0000000000047fff] bootmap [0000000000100000 - 0000000000167fff] pages 68 (8 early reservations) ==> bootmem [0000000000 - 0340000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000201b0a4] TEXT DATA BSS ==> [0001000000 - 000201b0a4] #3 [0037077000 - 0037fefd47] RAMDISK ==> [0037077000 - 0037fefd47] #4 [0000095800 - 0000100000] BIOS reserved ==> [0000095800 - 0000100000] #5 [000201c000 - 000201c18b] BRK ==> [000201c000 - 000201c18b] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #7 [000000b000 - 0000014000] PGTABLE ==> [000000b000 - 0000014000] found SMP MP-table at [ffff8800000ff780] ff780 Reserving 129MB of memory at 48MB for crashkernel (System RAM: 13312MB) [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880028600000-ffff880032dfffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00340000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000001 -> 0x00000095 0: 0x00000100 -> 0x000bd780 0: 0x00100000 -> 0x00340000 On node 0 totalpages: 3135252 DMA zone: 56 pages used for memmap DMA zone: 121 pages reserved DMA zone: 3811 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 757688 pages, LIFO batch:31 Normal zone: 32256 pages used for memmap Normal zone: 2327040 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0xffffffff base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000095000 - 0000000000096000 PM: Registered nosave memory: 0000000000096000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000bd780000 - 00000000bd78e000 PM: Registered nosave memory: 00000000bd78e000 - 00000000bd7d0000 PM: Registered nosave memory: 00000000bd7d0000 - 00000000bd7e0000 PM: Registered nosave memory: 00000000bd7e0000 - 00000000bd7ed000 PM: Registered nosave memory: 00000000bd7ed000 - 00000000be000000 PM: Registered nosave memory: 00000000be000000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at be000000 (gap: be000000:40e00000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u262144 pcpu-alloc: s94552 r8192 d24232 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3088539 Policy zone: Normal Kernel command line: ro root=UUID=ce823106-aeb4-4855-930f-d264b1d87941 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 12136948k/13631488k available (5222k kernel code, 1090480k absent, 404060k reserved, 7119k data, 1264k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:472 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 50331648 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 3058.874 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6117.74 BogoMIPS (lpj=3058874) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21439 entries in 85 pages APIC routing finalized to flat. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i7 CPU 880 @ 3.07GHz stepping 05 Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. CPU erratum AAJ80 worked around CPUID marked event: 'bus cycles' unavailable ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. Brought up 8 CPUs Total of 8 processors activated (48941.98 BogoMIPS). sizeof(vma)=200 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2648 bytes devtmpfs: initialized PM: Registering ACPI NVS region at bd78e000 (270336 bytes) regulator: core version 0.5 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: No dock devices found. HEST: Table not found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0xbe000000-0xdfffffff] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d17ff]) pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:16.0: reg 10: [mem 0xfbcfe000-0xfbcfe00f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0xfbcfc000-0xfbcfc3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0xfbcf6000-0xfbcf63ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f] pci 0000:00:1f.2: reg 24: [mem 0xfbcf4000-0xfbcf47ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xfbcee000-0xfbcee0ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xfbde0000-0xfbdfffff 64bit] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff] pci 0000:01:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10: [mem 0xfbdbc000-0xfbdbffff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:03.0: PCI bridge to [bus 01-01] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [mem 0xfbeff800-0xfbefffff 64bit] pci 0000:03:00.0: reg 18: [io 0xe800-0xe8ff] pci 0000:03:00.0: supports D2 pci 0000:03:00.0: PME# supported from D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:04:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit] pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.5: PCI bridge to [bus 04-04] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.5: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xbe000000-0xdfffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) Firmware did not grant requested _OSC control Unable to assume _OSC PCIe control. Disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 HPET: 8 timers in total, 5 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI hpet: hpet3 irq 25 for MSI hpet: hpet4 irq 26 for MSI hpet: hpet5 irq 27 for MSI hpet: hpet6 irq 28 for MSI Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfc000000-0xfcffffff] pnp 00:01: [mem 0xfd000000-0xfdffffff] pnp 00:01: [mem 0xfe000000-0xfebfffff] pnp 00:01: [mem 0xfed14000-0xfed19fff] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:02: [dma 4] pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0081-0x0083] pnp 00:02: [io 0x0087] pnp 00:02: [io 0x0089-0x008b] pnp 00:02: [io 0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0071] pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x00f0-0x00ff] pnp 00:05: [irq 13] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] pnp 00:06: [io 0x0a00-0x0a0f] pnp 00:06: [io 0x0a10-0x0a1f] pnp 00:06: [io 0x0a20-0x0a2f] pnp 00:06: [io 0x0a30-0x0a3f] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: [io 0x0010-0x001f] pnp 00:07: [io 0x0022-0x003f] pnp 00:07: [io 0x0044-0x005f] pnp 00:07: [io 0x0062-0x0063] pnp 00:07: [io 0x0065-0x006f] pnp 00:07: [io 0x0072-0x007f] pnp 00:07: [io 0x0080] pnp 00:07: [io 0x0084-0x0086] pnp 00:07: [io 0x0088] pnp 00:07: [io 0x008c-0x008e] pnp 00:07: [io 0x0090-0x009f] pnp 00:07: [io 0x00a2-0x00bf] pnp 00:07: [io 0x00e0-0x00ef] pnp 00:07: [io 0x04d0-0x04d1] pnp 00:07: [io 0x0800-0x087f] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] pnp 00:07: [io 0x0500-0x057f] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] pnp 00:07: [mem 0xfed20000-0xfed3ffff] pnp 00:07: [mem 0xfed40000-0xfed8ffff] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [mem 0xfed00000-0xfed003ff] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:0a: [mem 0xffc00000-0xffefffff] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [io 0x0060] pnp 00:0b: [io 0x0064] pnp 00:0b: [mem 0xfec00000-0xfec00fff] pnp 00:0b: [mem 0xfee00000-0xfee00fff] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0xe0000000-0xefffffff] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: [mem 0x00000000-0x0009ffff] pnp 00:0d: [mem 0x000c0000-0x000cffff] pnp 00:0d: [mem 0x000e0000-0x000fffff] pnp 00:0d: [mem 0x00100000-0xbdffffff] pnp 00:0d: [mem 0xfed90000-0xffffffff] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved system 00:06: [io 0x0a00-0x0a0f] has been reserved system 00:06: [io 0x0a10-0x0a1f] has been reserved system 00:06: [io 0x0a20-0x0a2f] has been reserved system 00:06: [io 0x0a30-0x0a3f] has been reserved system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: [io 0x0800-0x087f] has been reserved system 00:07: [io 0x0500-0x057f] has been reserved system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0d: [mem 0x00100000-0xbdffffff] could not be reserved system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1c.5: BAR 15: assigned [mem 0xbe000000-0xbe1fffff 64bit pref] pci 0000:00:1c.5: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbe200000-0xbe3fffff 64bit pref] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbe400000-0xbe5fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbe600000-0xbe7fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:03.0: PCI bridge to [bus 01-01] pci 0000:00:03.0: PCI bridge to [bus 01-01] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xbe400000-0xbe5fffff] pci 0000:00:1c.0: bridge window [mem 0xbe600000-0xbe7fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:00:1c.1: bridge window [mem 0xbe200000-0xbe3fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 04-04] pci 0000:00:1c.5: PCI bridge to [bus 04-04] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.5: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:1c.5: bridge window [mem 0xbe000000-0xbe1fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 05-05] pci 0000:00:1e.0: PCI bridge to [bus 05-05] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0104 -> 0107) alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.5: enabling device (0106 -> 0107) pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xbe000000-0xdfffffff] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed8ffff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xbe400000-0xbe5fffff] pci_bus 0000:02: resource 2 [mem 0xbe600000-0xbe7fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff] pci_bus 0000:03: resource 2 [mem 0xbe200000-0xbe3fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff] pci_bus 0000:04: resource 2 [mem 0xbe000000-0xbe1fffff 64bit pref] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:05: resource 7 [mem 0xbe000000-0xdfffffff] pci_bus 0000:05: resource 8 [mem 0xf0000000-0xfed8ffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1a.0: PCI INT A disabled alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1d.0: PCI INT A disabled pci 0000:01:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 15843k freed audit: initializing netlink socket (disabled) type=2000 audit(1380909904.498:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 23735 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 2731FE4BFA852F66 - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x1E intel_idle: lapic_timer_reliable_states 0x2 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000bd78e0c0 0286C (v01 DpgPmm P001Ist 00000011 INTL 20051117) ACPI: SSDT 00000000bd790930 00678 (v01 PmRef P001Cst 00003001 INTL 20051117) ERST: Table is not found! GHES: HEST is not enabled! Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbcfc000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbcf6000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:03: setting system clock to 2013-10-04 18:05:05 UTC (1380909905) Initalizing network drop monitor service Freeing unused kernel memory: 1264k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 900k freed Freeing unused kernel memory: 1672k freed dracut: dracut-004-303.el6 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com udev: starting version 147 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x174B:0xD132). [drm] register mmio base: 0xFBDE0000 [drm] register mmio size: 131072 ATOM BIOS: JUNIPER radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [drm] Detected VRAM RAM=1024M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 6078314 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 radeon 0000:01:00.0: irq 29 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] probing gen 2 caps for device 8086:d138 = 2/0 [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [drm] Loading JUNIPER Microcode platform radeon_cp.0: firmware: requesting radeon/JUNIPER_pfp.bin platform radeon_cp.0: firmware: requesting radeon/JUNIPER_me.bin platform radeon_cp.0: firmware: requesting radeon/JUNIPER_rlc.bin [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). radeon 0000:01:00.0: WB enabled radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880335498c00 radeon 0000:01:00.0: setting latency timer to 64 [drm] ring test on 0 succeeded in 1 usecs [drm] ib test on ring 0 succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] DP-1 [drm] HPD4 [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY2 [drm] Connector 1: [drm] HDMI-A-1 [drm] HPD5 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY2 [drm] Connector 2: [drm] DVI-I-1 [drm] HPD1 [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [drm] Encoders: [drm] DFP3: INTERNAL_UNIPHY1 [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 3: [drm] DVI-I-2 [drm] HPD6 [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [drm] Encoders: [drm] DFP4: INTERNAL_UNIPHY [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Internal thermal controller with fan control [drm] radeon: power management initialized [drm] fb mappable at 0xD0142000 [drm] vram apper at 0xD0000000 [drm] size 7680000 [drm] fb depth is 24 [drm] pitch is 6400 fbcon: radeondrmfb (fb0) is primary device usb 1-1: new high speed USB device number 2 using ehci_hcd usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected Console: switching to colour frame buffer device 200x75 fb0: radeondrmfb frame buffer device drm: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready [drm] Initialized radeon 2.22.0 20080528 for 0000:01:00.0 on minor 0 dracut: Starting plymouth daemon usb 2-1: new high speed USB device number 2 using ehci_hcd dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation ahci 0000:00:1f.2: version 3.0 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 30 for MSI/MSI-X ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x2f impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfbcf4000 port 0xfbcf4100 irq 30 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 30 ata3: SATA max UDMA/133 abar m2048@0xfbcf4000 port 0xfbcf4200 irq 30 ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 30 ata5: DUMMY ata6: SATA max UDMA/133 abar m2048@0xfbcf4000 port 0xfbcf4380 irq 30 usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.4: new low speed USB device number 3 using ehci_hcd usb 1-1.4: New USB device found, idVendor=0566, idProduct=3029 usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1.4: configuration #1 chosen from 1 choice input: HID 0566:3029 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3 generic-usb 0003:0566:3029.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0566:3029] on usb-0000:00:1a.0-1.4/input0 input: HID 0566:3029 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input4 generic-usb 0003:0566:3029.0002: input,hidraw1: USB HID v1.11 Device [HID 0566:3029] on usb-0000:00:1a.0-1.4/input1 usb 2-1.2: new high speed USB device number 3 using ehci_hcd ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD1001FAES-75W7A0, 05.01D05, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD1001FAES-7 05.0 PQ: 0 ANSI: 5 Refined TSC clocksource calibration: 3058.980 MHz. Switching to clocksource tsc usb 2-1.2: New USB device found, idVendor=18e3, idProduct=9106 usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.2: Product: Mass Storage Device usb 2-1.2: Manufacturer: Generic usb 2-1.2: SerialNumber: 18E391066476 usb 2-1.2: configuration #1 chosen from 1 choice ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: PLDS DVD+/-RW DH-16ABS, PD11, max UDMA/100, ATAPI AN ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16ABS PD11 PQ: 0 ANSI: 5 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: ST31000333AS, CC1F, max UDMA/133 ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST31000333AS CC1F PQ: 0 ANSI: 5 ata6: SATA link down (SStatus 0 SControl 300) firewire_ohci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 firewire_ohci 0000:03:00.0: setting latency timer to 64 firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI version 1.10 firewire_ohci: swap not done yet firewire_ohci: swap not done yet Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sdb: sdb1 sdb2 sdb3 sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 3:0:0:0: [sdb] Attached SCSI disk firewire_core: created device fw0: GUID 842b2b8000b48711, S400 firewire_ohci: swap not done yet firewire_ohci: swap not done yet EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/sdb3 SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1380909909.557:2): selinux=0 auid=4294967295 ses=4294967295 dracut: usb-storage: device scan complete scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS sd 6:0:0:0: [sdc] Attached SCSI removable disk sd 6:0:0:1: [sdd] Attached SCSI removable disk sd 6:0:0:2: [sde] Attached SCSI removable disk sd 6:0:0:3: [sdf] Attached SCSI removable disk dracut: Switching root readahead-collector: starting udev: starting version 147 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 alloc irq_desc for 32 on node -1 alloc kstat_irqs on node -1 snd_hda_intel 0000:01:00.1: irq 32 for MSI/MSI-X snd_hda_intel 0000:01:00.1: setting latency timer to 64 input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh iTCO_wdt: Found a H57 TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sd 3:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 6:0:0:1: Attached scsi generic sg4 type 0 sd 6:0:0:2: Attached scsi generic sg5 type 0 sd 6:0:0:3: Attached scsi generic sg6 type 0 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x4 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x4 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x4 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x4 platform microcode: firmware: requesting intel-ucode/06-1e-05 Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated to revision 0x5, date = 2011-09-01 microcode: CPU1 updated to revision 0x5, date = 2011-09-01 microcode: CPU2 updated to revision 0x5, date = 2011-09-01 microcode: CPU3 updated to revision 0x5, date = 2011-09-01 microcode: CPU4 updated to revision 0x5, date = 2011-09-01 microcode: CPU5 updated to revision 0x5, date = 2011-09-01 microcode: CPU6 updated to revision 0x5, date = 2011-09-01 microcode: CPU7 updated to revision 0x5, date = 2011-09-01 tg3.c:v3.124 (March 21, 2012) tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:04:00.0: setting latency timer to 64 tg3 mdio bus: probed tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address xx:xx:xx:xx:xx:xx tg3 0000:04:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=400:01) tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: Adding 2097144k swap on /dev/sdb2. Priority:-1 extents:1 across:2097144k readahead-disable-service: delaying service auditd NET: Registered protocol family 10 lo: Disabled Privacy Extensions alloc irq_desc for 33 on node -1 alloc kstat_irqs on node -1 tg3 0000:04:00.0: irq 33 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready tg3 0000:04:00.0: eth0: Link is down tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. readahead-collector: starting delayed service auditd readahead-collector: sorting readahead-collector: finished