processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 37 model name : AMD Opteron(tm) Processor 254 stepping : 1 cpu MHz : 2792.567 cache size : 1024 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good pni lahf_lm bogomips : 5585.13 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 37 model name : AMD Opteron(tm) Processor 254 stepping : 1 cpu MHz : 2792.567 cache size : 1024 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good pni lahf_lm bogomips : 5583.97 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp -+-[0000:61]-+-04.0 3ware Inc 9xxx-series SATA-RAID [13c1:1002] | +-06.0 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] | \-06.1 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] +-[0000:41]---04.0-[42]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller [8086:101d] | +-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller [8086:101d] | +-06.0 Intel Corporation 82546EB Gigabit Ethernet Controller [8086:101d] | \-06.1 Intel Corporation 82546EB Gigabit Ethernet Controller [8086:101d] \-[0000:00]-+-00.0 NVIDIA Corporation CK804 Memory Controller [10de:005e] +-01.0 NVIDIA Corporation CK804 ISA Bridge [10de:0051] +-01.1 NVIDIA Corporation CK804 SMBus [10de:0052] +-02.0 NVIDIA Corporation CK804 USB Controller [10de:005a] +-02.1 NVIDIA Corporation CK804 USB Controller [10de:005b] +-04.0 NVIDIA Corporation CK804 AC'97 Audio Controller [10de:0059] +-06.0 NVIDIA Corporation CK804 IDE [10de:0053] +-09.0-[05]----05.0 Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] +-0a.0 NVIDIA Corporation CK804 Ethernet Controller [10de:0057] +-0e.0-[0a]----00.0 NVIDIA Corporation NV41GL [Quadro FX 1400] [10de:00ce] +-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] +-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] +-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] +-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] +-19.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] +-19.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] +-19.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] \-19.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] # dmidecode 2.11 SMBIOS 2.3 present. 71 structures occupying 2299 bytes. Table at 0x000EF2C0. Handle 0x0001, DMI type 0, 24 bytes BIOS Information Vendor: Hewlett-Packard Version: 786B9 v2.09 Release Date: 11/28/2006 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 1024 kB Characteristics: PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported Japanese floppy for Toshiba 1.2 MB is supported (int 13h) 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Function key-initiated network boot is supported BIOS Revision: 2.9 Handle 0x0002, DMI type 1, 27 bytes System Information Manufacturer: Hewlett-Packard Product Name: HP xw9300 Workstation Version: Serial Number: XXXXXXXXXX UUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX Wake-up Type: Power Switch SKU Number: PH553AV Family: Handle 0x0003, DMI type 2, 8 bytes Base Board Information Manufacturer: Hewlett-Packard Product Name: 09C4h Version: Not Specified Serial Number: XXXXXXXXXX Handle 0x0004, DMI type 3, 17 bytes Chassis Information Manufacturer: Hewlett-Packard Type: Mini Tower Lock: Not Present Version: HP Minitower Serial Number: JPA55203NG Asset Tag: JPA55203NG Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: Unknown OEM Information: 0x00000000 Handle 0x0005, DMI type 4, 40 bytes Processor Information Socket Designation: CPU0 Type: Central Processor Family: Opteron Manufacturer: AMD ID: 51 0F 02 00 FF FB 8B 07 Signature: Family 15, Model 37, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) Version: AMD Opteron(tm) Processor 254 Voltage: 1.4 V External Clock: 2000 MHz Max Speed: 3000 MHz Current Speed: 2800 MHz Status: Populated, Enabled Upgrade: Socket 940 L1 Cache Handle: 0x0007 L2 Cache Handle: 0x0008 L3 Cache Handle: 0x0009 Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Core Count: 1 Core Enabled: 1 Thread Count: 1 Characteristics: 64-bit capable Handle 0x0006, DMI type 4, 40 bytes Processor Information Socket Designation: CPU1 Type: Central Processor Family: Opteron Manufacturer: AMD ID: 51 0F 02 00 FF FB 8B 07 Signature: Family 15, Model 37, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) Version: AMD Opteron(tm) Processor 254 Voltage: 1.4 V External Clock: 2000 MHz Max Speed: 3000 MHz Current Speed: 2800 MHz Status: Populated, Enabled Upgrade: Socket 940 L1 Cache Handle: 0x000A L2 Cache Handle: 0x000B L3 Cache Handle: 0x000C Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Core Count: 1 Core Enabled: 1 Thread Count: 1 Characteristics: 64-bit capable Handle 0x0007, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Data&Inst Caches Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 kB Maximum Size: 128 kB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 2-way Set-associative Handle 0x0008, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 1024 kB Maximum Size: 1024 kB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 16-way Set-associative Handle 0x0009, DMI type 7, 19 bytes Cache Information Socket Designation: none Configuration: Disabled, Not Socketed, Level 3 Operational Mode: Unknown Location: Unknown Installed Size: 0 kB Maximum Size: 0 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Data&Inst Caches Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 kB Maximum Size: 128 kB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 2-way Set-associative Handle 0x000B, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 1024 kB Maximum Size: 1024 kB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 16-way Set-associative Handle 0x000C, DMI type 7, 19 bytes Cache Information Socket Designation: none Configuration: Disabled, Not Socketed, Level 3 Operational Mode: Unknown Location: Unknown Installed Size: 0 kB Maximum Size: 0 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: COM A External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB 3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB 4 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: Other External Reference Designator: USB 5 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: Other External Reference Designator: USB 6 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: KBD External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: MOUSE External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CD-AUDIO IN Internal Connector Type: On Board Sound Input From CD-ROM External Reference Designator: Not Specified External Connector Type: None Port Type: Audio Port Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: AUX AUDIO IN Internal Connector Type: On Board Sound Input From CD-ROM External Reference Designator: Not Specified External Connector Type: None Port Type: Audio Port Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PRIMARY ATA Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: None Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SECONDARY ATA Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: None Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FLOPPY Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: None Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Rear MIC External Connector Type: Mini DIN Port Type: Audio Port Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: AUDIO Internal Connector Type: Other External Reference Designator: Front MIC External Connector Type: Mini DIN Port Type: Audio Port Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: LINE IN External Connector Type: Mini DIN Port Type: Audio Port Handle 0x001E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: AUDIO Internal Connector Type: Other External Reference Designator: Front HeadPhone & Line Out External Connector Type: Mini DIN Port Type: Audio Port Handle 0x001F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: HEADPHONE/LINEOUT External Connector Type: Mini DIN Port Type: Audio Port Handle 0x0020, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: RJ45 External Connector Type: RJ-45 Port Type: Network Port Handle 0x0021, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FRONT FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0022, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CPU0 FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0023, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CPU1 FAN (P71) Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0024, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: REAR FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0025, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SPEAKER Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0026, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x0027, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 16 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0028, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 16 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0029, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: Flash Memory Error Correction Type: None Maximum Capacity: 1 MB Error Information Handle: Not Provided Number Of Devices: 1 Handle 0x002A, DMI type 14, 11 bytes Group Associations Name: Node 0 Items: 2 0x0005 (Processor) 0x0027 (Physical Memory Array) Handle 0x002B, DMI type 14, 11 bytes Group Associations Name: Node 1 Items: 2 0x0006 (Processor) 0x0028 (Physical Memory Array) Handle 0x002C, DMI type 17, 27 bytes Memory Device Array Handle: 0x0027 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 1 Locator: DIMM3B Bank Locator: CPU0 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: JEDEC ID: Serial Number: Asset Tag: Not Specified Part Number: Handle 0x002D, DMI type 17, 27 bytes Memory Device Array Handle: 0x0027 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 1 Locator: DIMM3A Bank Locator: CPU0 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: JEDEC ID: Serial Number: Asset Tag: Not Specified Part Number: Handle 0x002E, DMI type 17, 27 bytes Memory Device Array Handle: 0x0027 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: 2 Locator: DIMM1B Bank Locator: CPU0 Type: DDR Type Detail: Synchronous Speed: 400 MHz Manufacturer: JEDEC ID:C1 00 00 00 00 00 00 00 Serial Number: 26760104 Asset Tag: Not Specified Part Number: 72D128300HBR5C Handle 0x002F, DMI type 17, 27 bytes Memory Device Array Handle: 0x0027 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: 2 Locator: DIMM1A Bank Locator: CPU0 Type: DDR Type Detail: Synchronous Speed: 400 MHz Manufacturer: JEDEC ID:C1 00 00 00 00 00 00 00 Serial Number: 16640104 Asset Tag: Not Specified Part Number: 72D128300HBR5C Handle 0x0030, DMI type 17, 27 bytes Memory Device Array Handle: 0x0028 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 3 Locator: DIMM4B Bank Locator: CPU1 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: JEDEC ID: Serial Number: Asset Tag: Not Specified Part Number: Handle 0x0031, DMI type 17, 27 bytes Memory Device Array Handle: 0x0028 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 3 Locator: DIMM4A Bank Locator: CPU1 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: JEDEC ID: Serial Number: Asset Tag: Not Specified Part Number: Handle 0x0032, DMI type 17, 27 bytes Memory Device Array Handle: 0x0028 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: 4 Locator: DIMM2B Bank Locator: CPU1 Type: DDR Type Detail: Synchronous Speed: 400 MHz Manufacturer: JEDEC ID:C1 00 00 00 00 00 00 00 Serial Number: 17630104 Asset Tag: Not Specified Part Number: 72D128300HBR5C Handle 0x0033, DMI type 17, 27 bytes Memory Device Array Handle: 0x0028 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: 4 Locator: DIMM2A Bank Locator: CPU1 Type: DDR Type Detail: Synchronous Speed: 400 MHz Manufacturer: JEDEC ID:C1 00 00 00 00 00 00 00 Serial Number: 126C0104 Asset Tag: Not Specified Part Number: 72D128300HBR5C Handle 0x0035, DMI type 17, 27 bytes Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 4 bits Data Width: 4 bits Size: 1 MB Form Factor: Chip Set: None Locator: SYSTEM ROM Bank Locator: Not Specified Type: Flash Type Detail: Non-Volatile Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0036, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x0027 Partition Width: 2 Handle 0x0037, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00100000000 Ending Address: 0x0017FFFFFFF Range Size: 2 GB Physical Array Handle: 0x0028 Partition Width: 2 Handle 0x0038, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x000FFF80000 Ending Address: 0x000FFFFFFFF Range Size: 512 kB Physical Array Handle: 0x0029 Partition Width: 1 Handle 0x003B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x002E Memory Array Mapped Address Handle: 0x0036 Partition Row Position: 1 Handle 0x003C, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x002F Memory Array Mapped Address Handle: 0x0036 Partition Row Position: 2 Handle 0x003F, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00100000000 Ending Address: 0x0017FFFFFFF Range Size: 2 GB Physical Device Handle: 0x0032 Memory Array Mapped Address Handle: 0x0037 Partition Row Position: 1 Handle 0x0040, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00100000000 Ending Address: 0x0017FFFFFFF Range Size: 2 GB Physical Device Handle: 0x0033 Memory Array Mapped Address Handle: 0x0037 Partition Row Position: 2 Handle 0x0041, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x000FFF80000 Ending Address: 0x000FFFFFFFF Range Size: 512 kB Physical Device Handle: 0x0035 Memory Array Mapped Address Handle: 0x0038 Partition Row Position: 1 Handle 0x0042, DMI type 9, 13 bytes System Slot Information Designation: Slot1 (PCI-E x16) Type: x16 PCI Express Current Usage: In Use Length: Long ID: 1 Characteristics: 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0043, DMI type 9, 13 bytes System Slot Information Designation: Slot 2 (32 Bit PCI) Type: 32-bit PCI Current Usage: Available Length: Short ID: 2 Characteristics: 5.0 V is provided PME signal is supported SMBus signal is supported Handle 0x0044, DMI type 9, 13 bytes System Slot Information Designation: Slot3 (PCI-E x16) Type: x16 PCI Express Current Usage: Available Length: Long ID: 3 Characteristics: 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0045, DMI type 9, 13 bytes System Slot Information Designation: Slot 4 (PCI-X 100MHz) Type: 64-bit PCI-X Current Usage: In Use Length: Long ID: 4 Characteristics: 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0046, DMI type 9, 13 bytes System Slot Information Designation: Slot 5 (PCI-X 100MHz) Type: 64-bit PCI-X Current Usage: Available Length: Long ID: 5 Characteristics: 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0047, DMI type 9, 13 bytes System Slot Information Designation: Slot 6 (PCI-X 133MHz) Type: 64-bit PCI-X Current Usage: In Use Length: Long ID: 6 Characteristics: 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0048, DMI type 32, 11 bytes System Boot Information Status: No errors detected Handle 0x0049, DMI type 197, 10 bytes OEM-specific Type Header and Data: C5 0A 49 00 05 00 00 01 FF 01 Handle 0x004A, DMI type 197, 10 bytes OEM-specific Type Header and Data: C5 0A 4A 00 06 00 01 00 FF 02 Handle 0x004B, DMI type 207, 9 bytes OEM-specific Type Header and Data: CF 09 4B 00 00 00 00 24 00 Handle 0x004C, DMI type 127, 4 bytes End Of Table Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-358.23.2.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Oct 16 11:13:47 CDT 2013 Command line: ro root=UUID=798a1c36-4455-4c90-82fc-e3ef86b7ac3c rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff9300 (usable) BIOS-e820: 000000007fff9300 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000180000000 (usable) DMI 2.3 present. SMBIOS version 2.3 @ 0xF9C00 DMI: Hewlett-Packard HP xw9300 Workstation/09C4h, BIOS 786B9 v2.09 11/28/2006 e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x180000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-E7FFF write-protect E8000-EFFFF write-back F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0100000000 mask FF80000000 write-back 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0x7fff9 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007fff9000 0000000000 - 007fe00000 page 2M 007fe00000 - 007fff9000 page 4k kernel direct mapping tables up to 7fff9000 @ 8000-c000 init_memory_mapping: 0000000100000000-0000000180000000 0100000000 - 0180000000 page 2M kernel direct mapping tables up to 180000000 @ a000-11000 RAMDISK: 37079000 - 37fef12c HP xw9300 Workstation detected: force use of pci=noacpi ACPI: RSDP 00000000000e8010 00024 (v02 HP ) ACPI: XSDT 000000007fff94fc 0004C (v01 HP CPQ0062 20061128 00000000) ACPI: FACP 000000007fff96a4 0010C (v03 HP VIPER 00000001 00000000) ACPI Warning: FADT (revision 3) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288) ACPI: DSDT 000000007fff989a 014AF (v01 HP DSDT 00000001 MSFT 0100000E) ACPI: FACS 000000007fff9300 00040 ACPI: SSDT 000000007fffad49 03A95 (v02 HP PROJECT 00000001 MSFT 0100000E) ACPI: APIC 000000007fff97b0 0009E (v01 HP VIPER 00000001 00000000) ACPI: MCFG 000000007fff984e 0004C (v01 HP VIPER 00000001 00000000) ACPI: SRAT 000000007fff93ec 00110 (v02 HP VIPER 00000001 00000000) ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 1 -> APIC 1 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 e8000-80000000 SRAT: Node 1 PXM 1 100000000-180000000 NUMA: Allocated memnodemap from c000 - 6c040 NUMA: Using 15 for the hash shift. Bootmem setup node 0 0000000000000000-0000000080000000 NODE_DATA [0000000000100000 - 0000000000133fff] bootmap [0000000000134000 - 0000000000143fff] pages 10 (9 early reservations) ==> bootmem [0000000000 - 0080000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000201b0e4] TEXT DATA BSS ==> [0001000000 - 000201b0e4] #3 [0037079000 - 0037fef12c] RAMDISK ==> [0037079000 - 0037fef12c] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #5 [000201c000 - 000201c0f7] BRK ==> [000201c000 - 000201c0f7] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #7 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000] #8 [000000c000 - 000006c040] MEMNODEMAP ==> [000000c000 - 000006c040] Bootmem setup node 1 0000000100000000-0000000180000000 NODE_DATA [0000000100000040 - 000000010003403f] bootmap [0000000100035000 - 0000000100044fff] pages 10 (9 early reservations) ==> bootmem [0100000000 - 0180000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0001000000 - 000201b0e4] TEXT DATA BSS #3 [0037079000 - 0037fef12c] RAMDISK #4 [000009f400 - 0000100000] BIOS reserved #5 [000201c000 - 000201c0f7] BRK #6 [0000008000 - 000000a000] PGTABLE #7 [000000a000 - 000000c000] PGTABLE #8 [000000c000 - 000006c040] MEMNODEMAP found SMP MP-table at [ffff8800000f9bf0] f9bf0 Reserving 129MB of memory at 48MB for crashkernel (System RAM: 6144MB) [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880028600000-ffff88002a1fffff] on node 0 [ffffea0003800000-ffffea00053fffff] PMD -> [ffff880100200000-ffff880101dfffff] on node 1 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00180000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007fff9 1: 0x00100000 -> 0x00180000 On node 0 totalpages: 524183 DMA zone: 56 pages used for memmap DMA zone: 199 pages reserved DMA zone: 3743 pages, LIFO batch:0 DMA32 zone: 7112 pages used for memmap DMA32 zone: 513073 pages, LIFO batch:31 On node 1 totalpages: 524288 Normal zone: 7168 pages used for memmap Normal zone: 517120 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: HP MPTABLE: Product ID: workstation MPTABLE: APIC at: 0xFEE00000 I/O APIC #8 Version 17 at 0xFEC00000. I/O APIC #9 Version 17 at 0xFB600000. I/O APIC #10 Version 17 at 0xFB601000. I/O APIC #11 Version 17 at 0xFA200000. Processors: 2 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 56 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 PM: Registered nosave memory: 000000007fff9000 - 000000007fffa000 PM: Registered nosave memory: 000000007fffa000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2 PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u1048576 pcpu-alloc: s94552 r8192 d24232 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 2 [1] 1 3 Built 2 zonelists in Node order, mobility grouping on. Total pages: 1033936 Policy zone: Normal Kernel command line: ro root=UUID=798a1c36-4455-4c90-82fc-e3ef86b7ac3c rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 AMD-Vi disabled by default: pass amd_iommu=on to enable Memory: 3904860k/6291456k available (5223k kernel code, 2097572k absent, 289024k reserved, 7119k data, 1264k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:984 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled allocated 16777216 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 2792.567 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.13 BogoMIPS (lpj=2792567) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio tseg: 0000000000 mce: CPU supports 5 MCE banks ACPI: Core revision 20090903 ACPI: setting ELCR to 0e20 (from 0c20) ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21439 entries in 85 pages APIC routing finalized to flat. ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Opteron(tm) Processor 254 stepping 01 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f NMI watchdog enabled, takes one hw-pmu counter. Booting Node 1, Processors #1 Brought up 2 CPUs Total of 2 processors activated (11169.11 BogoMIPS). sizeof(vma)=200 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2648 bytes devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 node 0 link 0: io port [3000, 3fff] node 0 link 2: io port [1000, 2fff] node 1 link 0: io port [e000, efff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [a0000, bffff] node 1 link 0: mmio [e8000000, efffffff] node 0 link 0: mmio [febf0000, febfffff] node 0 link 0: mmio [f0000000, fa1fffff] node 0 link 2: mmio [fa800000, fb6fffff] node 1 link 0: mmio [fa200000, fa2fffff] TOM2: 0000000180000000 aka 6144M bus: [00,3f] on node 0 link 0 bus: 00 index 0 io port: [3000, dfff] bus: 00 index 1 io port: [0, fff] bus: 00 index 2 io port: [f000, ffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [fb700000, ffffffff] bus: 00 index 5 mmio: [f0000000, fa1fffff] bus: 00 index 6 mmio: [80000000, e7ffffff] bus: 00 index 7 mmio: [fa300000, fa7fffff] bus: 00 index 8 mmio: [180000000, fcffffffff] bus: [40,7f] on node 0 link 2 bus: 40 index 0 io port: [1000, 2fff] bus: 40 index 1 mmio: [fa800000, fb6fffff] bus: [80,ff] on node 1 link 0 bus: 80 index 0 io port: [e000, efff] bus: 80 index 1 mmio: [e8000000, efffffff] bus: 80 index 2 mmio: [fa200000, fa2fffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR PCI: BIOS Bug: MCFG area at e0000000 is not reserved in ACPI motherboard resources PCI: Not using MMCONFIG. ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI: No dock devices found. HEST: Table not found. vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) pci 0000:00:01.0: reg 10: [io 0xfb00-0xfbff] HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:01.1: reg 10: [io 0x3880-0x389f] pci 0000:00:01.1: reg 20: [io 0x3800-0x383f] pci 0000:00:01.1: reg 24: [io 0x3840-0x387f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10: [mem 0xfa100000-0xfa100fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10: [mem 0xfebf0000-0xfebf00ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: reg 10: [io 0x3000-0x30ff] pci 0000:00:04.0: reg 14: [io 0x3400-0x34ff] pci 0000:00:04.0: reg 18: [mem 0xfa101000-0xfa101fff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:06.0: reg 20: [io 0x38a0-0x38af] pci 0000:00:0a.0: reg 10: [mem 0xfa102000-0xfa102fff] pci 0000:00:0a.0: reg 14: [io 0x38b0-0x38b7] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled PCI: peer root bus 00 res updated from pci conf pci 0000:05:05.0: reg 10: [mem 0xfa004000-0xfa0047ff] pci 0000:05:05.0: reg 14: [mem 0xfa000000-0xfa003fff] pci 0000:05:05.0: supports D1 D2 pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:05.0: PME# disabled pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode) pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfa0fffff] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:09.0: bridge window [io 0x3000-0xdfff] (subtractive decode) pci 0000:00:09.0: bridge window [io 0x0000-0x0fff] (subtractive decode) pci 0000:00:09.0: bridge window [io 0xf000-0xffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0xfb700000-0xffffffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0xf0000000-0xfa1fffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x80000000-0xe7ffffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0xfa300000-0xfa7fffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x180000000-0xfcffffffff] (subtractive decode) pci 0000:0a:00.0: reg 10: [mem 0xf8000000-0xf8ffffff] pci 0000:0a:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref] pci 0000:0a:00.0: reg 1c: [mem 0xf9000000-0xf9ffffff 64bit] pci 0000:0a:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0e.0: PCI bridge to [bus 0a-0a] pci 0000:00:0e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0e.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:0e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=io+mem,locks=none pci 0000:42:04.0: reg 10: [mem 0xfb500000-0xfb51ffff 64bit] pci 0000:42:04.0: reg 20: [io 0x2000-0x203f] pci 0000:42:04.1: reg 10: [mem 0xfb520000-0xfb53ffff 64bit] pci 0000:42:04.1: reg 20: [io 0x2040-0x207f] pci 0000:42:06.0: reg 10: [mem 0xfb540000-0xfb55ffff 64bit] pci 0000:42:06.0: reg 20: [io 0x2080-0x20bf] pci 0000:42:06.1: reg 10: [mem 0xfb560000-0xfb57ffff 64bit] pci 0000:42:06.1: reg 20: [io 0x20c0-0x20ff] pci 0000:41:04.0: PCI bridge to [bus 42-42] pci 0000:41:04.0: bridge window [io 0x2000-0x2fff] pci 0000:41:04.0: bridge window [mem 0xfb500000-0xfb5fffff] pci 0000:41:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) PCI: Discovered primary peer bus 41 [IRQ] pci 0000:61:04.0: reg 10: [io 0x1000-0x10ff] pci 0000:61:04.0: reg 14: [mem 0xfb400000-0xfb4000ff 64bit] pci 0000:61:04.0: reg 1c: [mem 0xfa800000-0xfaffffff 64bit pref] pci 0000:61:04.0: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:61:04.0: supports D1 pci 0000:61:04.0: PME# supported from D0 D1 D3hot pci 0000:61:04.0: PME# disabled pci 0000:61:06.0: reg 10: [io 0x1400-0x14ff] pci 0000:61:06.0: reg 14: [mem 0xfb000000-0xfb0fffff 64bit] pci 0000:61:06.0: reg 1c: [mem 0xfb100000-0xfb1fffff 64bit] pci 0000:61:06.0: reg 30: [mem 0x00000000-0x000fffff pref] pci 0000:61:06.0: supports D1 D2 pci 0000:61:06.1: reg 10: [io 0x1800-0x18ff] pci 0000:61:06.1: reg 14: [mem 0xfb200000-0xfb2fffff 64bit] pci 0000:61:06.1: reg 1c: [mem 0xfb300000-0xfb3fffff 64bit] pci 0000:61:06.1: reg 30: [mem 0x00000000-0x000fffff pref] pci 0000:61:06.1: supports D1 D2 PCI: Discovered primary peer bus 61 [IRQ] PCI: Discovered primary peer bus 81 [IRQ] pci 0000:00:01.0: default IRQ router [10de:0051] PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource jiffies pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [io 0x00f0-0x00ff] pnp 00:01: [irq 13] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0080-0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: [dma 4] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0071] pnp 00:03: IRQ 8 override to level, low PCI: setting IRQ 8 as level-triggered pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [irq 12] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) pnp 00:06: [io 0x0060] pnp 00:06: [io 0x0064] pnp 00:06: IRQ 1 override to level, low PCI: setting IRQ 1 as level-triggered pnp 00:06: [irq 1] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:07: IRQ 4 override to level, low PCI: setting IRQ 4 as level-triggered pnp 00:07: [irq 4] pnp 00:07: [io 0x03f8-0x03ff] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) pnp 00:08: [irq 6] pnp 00:08: [dma 2] pnp 00:08: [io 0x03f0-0x03f5] pnp 00:08: [io 0x03f7] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:09: [mem 0xfec00000-0xfec00fff] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active) pnp 00:0a: [io 0x0010-0x001f] pnp 00:0a: [io 0x0050-0x0053] pnp 00:0a: [io 0x0072-0x0077] pnp 00:0a: [io 0x0090-0x009f] pnp 00:0a: [io 0x04d0-0x04d1] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [io 0x0400-0x047f] pnp 00:0b: [io 0x0480-0x048f] pnp 00:0b: [io 0xf800-0xf87f] pnp 00:0b: [io 0xf880-0xf8ff] pnp 00:0b: [io 0xf900-0xf97f] pnp 00:0b: [io 0xf980-0xf9ff] pnp 00:0b: [io 0xfa00-0xfa7f] pnp 00:0b: [io 0xfa80-0xfaff] pnp 00:0b: [io 0xfc00-0xfc7f] pnp 00:0b: [io 0xfc80-0xfcff] pnp 00:0b: [io 0xfe00-0xfe7f] pnp 00:0b: [io 0xfe80-0xfeff] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:0d: Plug and Play ACPI device, IDs PNP0a03 (active) ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR pnp 00:0e: [mem 0x00000000-0x0009ffff] pnp 00:0e: [mem 0x00100000-0x7fffffff] pnp 00:0e: [mem 0x000e8000-0x000fffff] pnp 00:0e: [mem 0xfec01000-0xffffffff] pnp 00:0e: [mem 0x000cf800-0x000dffff] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:61:06.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:0e: disabling [mem 0x000e8000-0x000fffff] because it overlaps 0000:61:06.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:0e: disabling [mem 0x000cf800-0x000dffff] because it overlaps 0000:61:06.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:61:06.1 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:0e: disabling [mem 0x000e8000-0x000fffff disabled] because it overlaps 0000:61:06.1 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:0e: disabling [mem 0x000cf800-0x000dffff disabled] because it overlaps 0000:61:06.1 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:0a: [io 0x04d0-0x04d1] has been reserved system 00:0b: [io 0x0400-0x047f] has been reserved system 00:0b: [io 0x0480-0x048f] has been reserved system 00:0b: [io 0xf800-0xf87f] has been reserved system 00:0b: [io 0xf880-0xf8ff] has been reserved system 00:0b: [io 0xf900-0xf97f] has been reserved system 00:0b: [io 0xf980-0xf9ff] has been reserved system 00:0b: [io 0xfa00-0xfa7f] has been reserved system 00:0b: [io 0xfa80-0xfaff] has been reserved system 00:0b: [io 0xfc00-0xfc7f] has been reserved system 00:0b: [io 0xfc80-0xfcff] has been reserved system 00:0b: [io 0xfe00-0xfe7f] has been reserved system 00:0b: [io 0xfe80-0xfeff] has been reserved system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved system 00:0e: [mem 0xfec01000-0xffffffff] has been reserved Switching to clocksource acpi_pm PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:09.0: PCI bridge to [bus 05-05] pci 0000:00:09.0: PCI bridge to [bus 05-05] pci 0000:00:09.0: bridge window [io disabled] pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfa0fffff] pci 0000:00:09.0: bridge window [mem pref disabled] pci 0000:0a:00.0: BAR 6: can't assign mem pref (size 0x20000) pci 0000:00:0e.0: PCI bridge to [bus 0a-0a] pci 0000:00:0e.0: PCI bridge to [bus 0a-0a] pci 0000:00:0e.0: bridge window [io disabled] pci 0000:00:0e.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:0e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] pci 0000:41:04.0: PCI bridge to [bus 42-42] pci 0000:41:04.0: PCI bridge to [bus 42-42] pci 0000:41:04.0: bridge window [io 0x2000-0x2fff] pci 0000:41:04.0: bridge window [mem 0xfb500000-0xfb5fffff] pci 0000:41:04.0: bridge window [mem pref disabled] pci 0000:61:06.0: BAR 6: assigned [mem 0xe8000000-0xe80fffff pref] pci 0000:61:06.1: BAR 6: assigned [mem 0xe8100000-0xe81fffff pref] pci 0000:61:04.0: BAR 6: assigned [mem 0xe8200000-0xe820ffff pref] pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x3000-0xdfff] pci_bus 0000:00: resource 5 [io 0x0000-0x0fff] pci_bus 0000:00: resource 6 [io 0xf000-0xffff] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 8 [mem 0xfb700000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfa1fffff] pci_bus 0000:00: resource 10 [mem 0x80000000-0xe7ffffff] pci_bus 0000:00: resource 11 [mem 0xfa300000-0xfa7fffff] pci_bus 0000:00: resource 12 [mem 0x180000000-0xfcffffffff] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfa0fffff] pci_bus 0000:05: resource 4 [io 0x3000-0xdfff] pci_bus 0000:05: resource 5 [io 0x0000-0x0fff] pci_bus 0000:05: resource 6 [io 0xf000-0xffff] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:05: resource 8 [mem 0xfb700000-0xffffffff] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfa1fffff] pci_bus 0000:05: resource 10 [mem 0x80000000-0xe7ffffff] pci_bus 0000:05: resource 11 [mem 0xfa300000-0xfa7fffff] pci_bus 0000:05: resource 12 [mem 0x180000000-0xfcffffffff] pci_bus 0000:0a: resource 1 [mem 0xf8000000-0xf9ffffff] pci_bus 0000:0a: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] pci_bus 0000:41: resource 0 [io 0x0000-0xffff] pci_bus 0000:41: resource 1 [mem 0x00000000-0xffffffffff] pci_bus 0000:42: resource 0 [io 0x2000-0x2fff] pci_bus 0000:42: resource 1 [mem 0xfb500000-0xfb5fffff] pci_bus 0000:61: resource 0 [io 0x0000-0xffff] pci_bus 0000:61: resource 1 [mem 0x00000000-0xffffffffff] pci_bus 0000:81: resource 0 [io 0x0000-0xffff] pci_bus 0000:81: resource 1 [mem 0x00000000-0xffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 5 pci 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 10 pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:0a:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 15832k freed PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1388738133.470:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7657 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 1EC70CB89755E23 - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKW._STA] (Node ffff88007ee7ef10), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKX._STA] (Node ffff88007ee7ee70), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKY._STA] (Node ffff88007ee7edd0), AE_ERROR ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20090903/evregion-424) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ACPI Error (uteval-0250): Method execution failed [\_SB_.LNKZ._STA] (Node ffff88007ee83ab0), AE_ERROR ERST: Table is not found! GHES: HEST is not enabled! Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 10 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 10, io mem 0xfebf0000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 5 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 5, io mem 0xfa100000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:03: setting system clock to 2014-01-03 08:35:34 UTC (1388738134) Initalizing network drop monitor service Freeing unused kernel memory: 1264k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 900k freed Freeing unused kernel memory: 1672k freed dracut: dracut-004-303.el6 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com udev: starting version 147 ACPI: WMI: Mapper loaded [drm] Initialized drm 1.1.0 20060810 nouveau 0000:0a:00.0: PCI->APIC IRQ transform: INT A -> IRQ 5 nouveau 0000:0a:00.0: setting latency timer to 64 [drm] nouveau 0000:0a:00.0: Detected an NV40 generation card (0x042e00a1) [drm] nouveau 0000:0a:00.0: Checking PRAMIN for VBIOS [drm] nouveau 0000:0a:00.0: ... appears to be valid [drm] nouveau 0000:0a:00.0: Using VBIOS from PRAMIN [drm] nouveau 0000:0a:00.0: BIT BIOS found [drm] nouveau 0000:0a:00.0: Bios version xxx.xxx.xxx.xxx [drm] nouveau 0000:0a:00.0: TMDS table version 1.1 [drm] nouveau 0000:0a:00.0: MXM: no VBIOS data, nothing to do [drm] nouveau 0000:0a:00.0: DCB version 3.0 [drm] nouveau 0000:0a:00.0: DCB outp 00: 01000300 00000028 [drm] nouveau 0000:0a:00.0: DCB outp 01: 01000302 00000000 [drm] nouveau 0000:0a:00.0: DCB outp 02: 04011310 00000028 [drm] nouveau 0000:0a:00.0: DCB outp 03: 04011312 00000000 [drm] nouveau 0000:0a:00.0: DCB conn 00: 1030 [drm] nouveau 0000:0a:00.0: DCB conn 01: 2130 [drm] nouveau 0000:0a:00.0: DCB conn 02: 0260 [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 0 at offset 0xB083 [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 1 at offset 0xB55D [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 2 at offset 0xBA67 [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 3 at offset 0xBBDE [drm] nouveau 0000:0a:00.0: Parsing VBIOS init table 4 at offset 0xBCB2 [TTM] Zone kernel: Available graphics memory: 1962266 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] nouveau 0000:0a:00.0: Detected 128MiB VRAM (DDR1) [drm] nouveau 0000:0a:00.0: 512 MiB GART (aperture) Slow work thread pool: Starting up Slow work thread pool: Ready [drm] nouveau 0000:0a:00.0: Saving VGA fonts [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] nouveau 0000:0a:00.0: 1 available performance level(s) [drm] nouveau 0000:0a:00.0: 0: core 350MHz shader 325MHz memory 600MHz fanspeed 50% [drm] nouveau 0000:0a:00.0: c: core 299MHz shader 299MHz memory 598MHz voltage 1300mV fanspeed 100% [drm] nouveau 0000:0a:00.0: MM: using M2MF for buffer copies [drm] nouveau 0000:0a:00.0: 0xA6AE: Parsing digital output script table [drm] nouveau 0000:0a:00.0: 0xA6FE: Parsing digital output script table IBM TrackPoint firmware: 0x0b, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 [drm] nouveau 0000:0a:00.0: Setting dpms mode 3 on vga encoder (output 0) [drm] nouveau 0000:0a:00.0: Setting dpms mode 3 on tmds encoder (output 1) [drm] nouveau 0000:0a:00.0: Setting dpms mode 3 on vga encoder (output 2) [drm] nouveau 0000:0a:00.0: Setting dpms mode 3 on tmds encoder (output 3) No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 [drm] nouveau 0000:0a:00.0: allocated 1024x768 fb: 0x49000, bo ffff880037d2f000 fbcon: nouveaufb (fb0) is primary device Console: switching to colour frame buffer device 128x48 fb0: nouveaufb frame buffer device drm: registered panic notifier [drm] Initialized nouveau 1.0.0 20120316 for 0000:0a:00.0 on minor 0 dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation pata_amd 0000:00:06.0: version 0.4.1 pata_amd 0000:00:06.0: setting latency timer to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x38a0 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x38a8 irq 15 ata1.00: ATAPI: HL-DT-STDVDRRW GWA-4166B, 1.03, max UDMA/44 ata1: nv_mode_filter: 0xf39f&0xf3ff->0xf39f, BIOS=0xf000 (0xc4000000) ACPI=0x0 ata1.00: configured for UDMA/44 scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRRW GWA-4166B 1.03 PQ: 0 ANSI: 5 Fusion MPT base driver 3.04.20 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.20 mptspi 0000:61:06.0: PCI->APIC IRQ transform: INT A -> IRQ 5 mptbase: ioc0: Initiating bringup ioc0: LSI53C1030 B2: Capabilities={Initiator,Target} scsi2 : ioc0: LSI53C1030 B2, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=5 mptspi 0000:61:06.1: PCI->APIC IRQ transform: INT B -> IRQ 10 mptbase: ioc1: Initiating bringup ioc1: LSI53C1030 B2: Capabilities={Initiator,Target} scsi3 : ioc1: LSI53C1030 B2, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=10 3ware 9000 Storage Controller device driver for Linux vxxx.xxx.xxx.xxxRH. 3w-9xxx 0000:61:04.0: PCI->APIC IRQ transform: INT A -> IRQ 5 scsi4 : 3ware 9000 Storage Controller 3w-9xxx: scsi4: Found a 3ware 9000 Storage Controller at 0xfb400000, IRQ: 5. 3w-9xxx: scsi4: Firmware FE9X xxx.xxx.xxx.xxx, BIOS BE9X xxx.xxx.xxx.xxx, Ports: 4. scsi 4:0:0:0: Direct-Access AMCC 9500S-4LP DISK 2.08 PQ: 0 ANSI: 3 firewire_ohci 0000:05:05.0: PCI->APIC IRQ transform: INT A -> IRQ 10 firewire_ohci: Added fw-ohci device 0000:05:05.0, OHCI version 1.10 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sd 4:0:0:0: [sda] 488259584 512-byte logical blocks: (249 GB/232 GiB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA sda: sda1 sda2 sd 4:0:0:0: [sda] Attached SCSI disk firewire_core: created device fw0: GUID 0060b00000184fc7, S400 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/sda1 SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1388738143.374:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root readahead: starting udev: starting version 147 i2c i2c-3: nForce2 SMBus adapter at 0x3800 i2c i2c-4: nForce2 SMBus adapter at 0x3840 Intel ICH 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 11 Intel ICH 0000:00:04.0: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50923 usecs (2408 samples) intel8x0: clocking to 48723 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11 forcedeth 0000:00:0a.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr xx:xx:xx:xx:xx:xx forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 4:0:0:0: Attached scsi generic sg1 type 0 MCE: In-kernel MCE decoding enabled. EDAC MC: Ver: 2.1.0 Oct 16 2013 AMD64 EDAC driver v3.4.0 EDAC amd64: DRAM ECC enabled. EDAC amd64: K8 revE or earlier detected (node 0). EDAC amd64: CS2: Registered Double data rate SDRAM EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2 EDAC amd64: DRAM ECC enabled. EDAC amd64: K8 revE or earlier detected (node 1). EDAC amd64: CS2: Registered Double data rate SDRAM EDAC MC1: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:19.2 EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: CPU0: AMD CPU family 0xf not supported microcode: CPU1: AMD CPU family 0xf not supported Microcode Update Driver: v2.00 , Peter Oruba e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000 0000:42:04.0: using bridge 0000:41:04.0 INT A to get IRQ 5 e1000 0000:42:04.0: PCI->APIC IRQ transform: INT A -> IRQ 5 e1000 0000:42:04.0: eth1: (PCI-X:120MHz:64-bit) xx:xx:xx:xx:xx:xx e1000 0000:42:04.0: eth1: Intel(R) PRO/1000 Network Connection e1000 0000:42:04.1: using bridge 0000:41:04.0 INT B to get IRQ 5 e1000 0000:42:04.1: PCI->APIC IRQ transform: INT B -> IRQ 5 e1000 0000:42:04.1: eth2: (PCI-X:120MHz:64-bit) xx:xx:xx:xx:xx:xx e1000 0000:42:04.1: eth2: Intel(R) PRO/1000 Network Connection e1000 0000:42:06.0: using bridge 0000:41:04.0 INT C to get IRQ 5 e1000 0000:42:06.0: PCI->APIC IRQ transform: INT C -> IRQ 5 e1000 0000:42:06.0: eth3: (PCI-X:120MHz:64-bit) xx:xx:xx:xx:xx:xx e1000 0000:42:06.0: eth3: Intel(R) PRO/1000 Network Connection e1000 0000:42:06.1: using bridge 0000:41:04.0 INT D to get IRQ 10 e1000 0000:42:06.1: PCI->APIC IRQ transform: INT D -> IRQ 10 e1000 0000:42:06.1: eth4: (PCI-X:120MHz:64-bit) xx:xx:xx:xx:xx:xx e1000 0000:42:06.1: eth4: Intel(R) PRO/1000 Network Connection udev: renamed network interface eth1 to rename3 udev: renamed network interface eth2 to rename4 udev: renamed network interface eth3 to eth1 udev: renamed network interface eth4 to eth2 udev: renamed network interface rename3 to eth4 udev: renamed network interface rename4 to eth3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Adding 1029112k swap on /dev/sda2. Priority:-1 extents:1 across:1029112k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team eth0: no IPv6 routers present powernow-k8: Found 2 AMD Opteron(tm) Processor 254 (2 cpu cores) (version 2.20.00) [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [Firmware Bug]: powernow-k8: Try again with latest BIOS. RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module.