processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz stepping : 10 cpu MHz : 1603.000 cache size : 3072 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dts bogomips : 5866.76 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz stepping : 10 cpu MHz : 1603.000 cache size : 3072 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dts bogomips : 5866.76 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: -[0000:00]-+-00.0 NVIDIA Corporation MCP73 Host Bridge [10de:07c1] +-00.1 NVIDIA Corporation nForce 630i memory controller [10de:07cb] +-01.0 NVIDIA Corporation nForce 630i memory controller [10de:07cd] +-01.1 NVIDIA Corporation nForce 630i memory controller [10de:07ce] +-01.2 NVIDIA Corporation nForce 630i memory controller [10de:07cf] +-01.3 NVIDIA Corporation nForce 630i memory controller [10de:07d0] +-01.4 NVIDIA Corporation nForce 630i memory controller [10de:07d1] +-01.5 NVIDIA Corporation nForce 630i memory controller [10de:07d2] +-01.6 NVIDIA Corporation nForce 630i memory controller [10de:07d3] +-02.0 NVIDIA Corporation nForce 630i memory controller [10de:07d6] +-03.0 NVIDIA Corporation MCP73 LPC Bridge [10de:07d7] +-03.1 NVIDIA Corporation MCP73 SMBus [10de:07d8] +-03.2 NVIDIA Corporation MCP73 Memory Controller [10de:07d9] +-03.3 NVIDIA Corporation MCP73 Co-processor [10de:07da] +-03.4 NVIDIA Corporation MCP73 Memory Controller [10de:07c8] +-04.0 NVIDIA Corporation GeForce 7100/nForce 630i USB [10de:07fe] +-04.1 NVIDIA Corporation MCP73 [nForce 630i] USB 2.0 Controller (EHCI) [10de:056a] +-08.0 NVIDIA Corporation MCP73 IDE [10de:056c] +-09.0 NVIDIA Corporation MCP73 High Definition Audio [10de:07fc] +-0a.0-[01]-- +-0b.0-[02]-- +-0c.0-[03]-- +-0d.0-[04]----00.0 Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] +-0e.0 NVIDIA Corporation MCP73 IDE [10de:07f0] \-10.0 NVIDIA Corporation C73 [GeForce 7100 / nForce 630i] [10de:07e1] # dmidecode 2.11 SMBIOS 2.4 present. 43 structures occupying 1256 bytes. Table at 0x000FD530. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: NEC Version: 0009/458A0900 Release Date: 05/25/2009 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 1024 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported EDD is supported Japanese floppy for NEC 9800 1.2 MB is supported (int 13h) Japanese floppy for Toshiba 1.2 MB is supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported BIOS boot specification is supported Function key-initiated network boot is supported Targeted content distribution is supported BIOS Revision: 1.1 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: NEC Product Name: PC-MJ29RCZ77 Version: Serial Number: XXXXXXXXX UUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX Wake-up Type: Other SKU Number: Family: Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: NEC Product Name: MS-7402MA Version: MA4 Serial Number: XXXXXXXXXX Asset Tag: Features: Board is a hosting board Board is replaceable Location In Chassis: Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: NEC Type: Space-saving Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 Handle 0x0004, DMI type 4, 40 bytes Processor Information Socket Designation: SOCKET775 M/B Type: Central Processor Family: Core 2 Duo Manufacturer: Intel Corporation ID: 7A 06 01 00 FF FB EB BF Signature: Type 0, Family 6, Model 23, Stepping 10 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Core(TM)2 Duo processor Voltage: 1.3 V External Clock: 266 MHz Max Speed: 2933 MHz Current Speed: 2933 MHz Status: Populated, Enabled Upgrade: Socket LGA775 L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Core Count: 2 Core Enabled: 2 Thread Count: 2 Characteristics: 64-bit capable Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1-Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 64 kB Maximum Size: 64 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: None System Type: Other Associativity: 8-way Set-associative Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2-Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 3072 kB Maximum Size: 3072 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: Other Handle 0x0007, DMI type 5, 20 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 2048 MB Maximum Total Memory Size: 4096 MB Supported Speeds: Other Supported Memory Types: DIMM SDRAM Memory Module Voltage: 3.3 V Associated Memory Slots: 2 0x0008 0x0009 Enabled Error Correcting Capabilities: None Handle 0x0008, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM1 Bank Connections: 0 1 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 2048 MB (Double-bank Connection) Enabled Size: 2048 MB (Double-bank Connection) Error Status: OK Handle 0x0009, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM2 Bank Connections: 2 3 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 2048 MB (Double-bank Connection) Enabled Size: 2048 MB (Double-bank Connection) Error Status: OK Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: JKBMS1 External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: JKBMS1 External Connector Type: PS/2 Port Type: Mouse Port Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: JACK1C External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: JACK1B External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: JACK1A External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: Other External Reference Designator: Serial Port 1 External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: Other External Reference Designator: Parallel Port 1 External Connector Type: DB-25 female Port Type: Parallel Port ECP Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: LAN1 External Connector Type: RJ-45 Port Type: Network Port Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: USB 3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: USB 3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: JVGA1 External Connector Type: DB-15 female Port Type: Video Port Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Internal Connector Type: None External Reference Designator: External Connector Type: None Port Type: None Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: JUSB1 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: None Port Type: USB Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: JUSB2 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: None Port Type: USB Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FDD1 Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: IDE1 Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA1 Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA2 Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0020, DMI type 10, 6 bytes On Board Device Information Type: Ethernet Status: Enabled Description: BCM5787M Handle 0x0021, DMI type 11, 5 bytes OEM Strings String 1: PC-MJ29RCZ7W8F7ZYSUB String 2: String 3: $BIOSE0100101000102103100 String 4: String 5: Handle 0x0022, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0023, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Array Handle: 0x0022 Partition Width: 2 Handle 0x0024, DMI type 17, 27 bytes Memory Device Array Handle: 0x0022 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: Bank A Type: DDR2 Type Detail: Synchronous Speed: 800 MHz Manufacturer: Samsung Serial Number: XXXXXXXX Asset Tag: AssetTagNum0 Part Number: M3 78T5663EH3-CF7 Handle 0x0025, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x0024 Memory Array Mapped Address Handle: 0x0023 Partition Row Position: 1 Handle 0x0026, DMI type 17, 27 bytes Memory Device Array Handle: 0x0022 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: DIMM2 Bank Locator: Bank B Type: DDR2 Type Detail: Synchronous Speed: 800 MHz Manufacturer: Samsung Serial Number: XXXXXXXX Asset Tag: AssetTagNum1 Part Number: M3 78T5663EH3-CF7 Handle 0x0027, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x0026 Memory Array Mapped Address Handle: 0x0023 Partition Row Position: 1 Handle 0x0028, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x0029, DMI type 136, 6 bytes OEM-specific Type Header and Data: 88 06 29 00 5A 5A Handle 0x002A, DMI type 127, 4 bytes End Of Table Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-431.5.1.el6.x86_64 (mockbuild@c6b10.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Wed Feb 12 00:41:43 UTC 2014 Command line: ro root=/dev/mapper/vg_chiho-lv_root rd_NO_LUKS rd_LVM_LV=vg_chiho/lv_root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_chiho/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM LANG=en_US.UTF-8 rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable) BIOS-e820: 00000000bffa0000 - 00000000bffae000 (ACPI data) BIOS-e820: 00000000bffae000 - 00000000bffe0000 (ACPI NVS) BIOS-e820: 00000000bffe0000 - 00000000bffee000 (reserved) BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) DMI 2.4 present. SMBIOS version 2.4 @ 0xFAEA0 DMI: NEC PC-MJ29RCZ77/MS-7402MA, BIOS 0009/458A0900 05/25/2009 e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 100000000 mask FE0000000 write-back 3 base 120000000 mask FF0000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbffa0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bffa0000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bffa0000 page 4k kernel direct mapping tables up to bffa0000 @ 8000-d000 Use unified mapping for non-reserved e820 regions. init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ b000-d000 RAMDISK: 36f9c000 - 37fef982 ACPI: RSDP 00000000000f9eb0 00024 (v02 ACPIAM) ACPI: XSDT 00000000bffa0100 00064 (v01 NEC DT000018 00090000 MSFT 00000097) ACPI: FACP 00000000bffa0290 000F4 (v03 NEC DT000018 00090000 MSFT 00000097) ACPI: DSDT 00000000bffa0620 04D27 (v02 NEC DT000018 00090000 INTL 20051117) ACPI: FACS 00000000bffae000 00040 ACPI: APIC 00000000bffa0390 00080 (v02 NEC DT000018 00090000 MSFT 00000097) ACPI: MCFG 00000000bffa0410 0003C (v02 NEC DT000018 00090000 MSFT 00000097) ACPI: SLIC 00000000bffa0450 00176 (v02 NEC DT000018 00090000 MSFT 00000097) ACPI: WDRT 00000000bffa05d0 00047 (v02 052509 NV-WDRT 20090525 MSFT 00000097) ACPI: OEMB 00000000bffae040 00071 (v02 052509 OEMB1117 20090525 MSFT 00000097) ACPI: HPET 00000000bffa5350 00038 (v02 NEC DT000018 00090000 MSFT 00000097) ACPI: SSDT 00000000bffae6c0 00A7C (v02 DpgPmm CpuPm 00000012 INTL 20051117) ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. No NUMA configuration found Faking a node at 0000000000000000-0000000130000000 Bootmem setup node 0 0000000000000000-0000000130000000 NODE_DATA [000000000000c000 - 000000000003ffff] bootmap [0000000000040000 - 0000000000065fff] pages 26 (8 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000201faa4] TEXT DATA BSS ==> [0001000000 - 000201faa4] #3 [0036f9c000 - 0037fef982] RAMDISK ==> [0036f9c000 - 0037fef982] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0002020000 - 00020201e8] BRK ==> [0002020000 - 00020201e8] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] found SMP MP-table at [ffff8800000ff780] ff780 Reserving 129MB of memory at 48MB for crashkernel (System RAM: 4864MB) [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x000bffa0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 982846 DMA zone: 56 pages used for memmap DMA zone: 103 pages reserved DMA zone: 3839 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767960 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000bffa0000 - 00000000bffae000 PM: Registered nosave memory: 00000000bffae000 - 00000000bffe0000 PM: Registered nosave memory: 00000000bffe0000 - 00000000bffee000 PM: Registered nosave memory: 00000000bffee000 - 00000000bfff0000 PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u524288 pcpu-alloc: s94872 r8192 d23912 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 965719 Policy zone: Normal Kernel command line: ro root=/dev/mapper/vg_chiho-lv_root rd_NO_LUKS rd_LVM_LV=vg_chiho/lv_root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M rd_LVM_LV=vg_chiho/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM LANG=en_US.UTF-8 rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 3643700k/4980736k available (5326k kernel code, 1049352k absent, 287684k reserved, 7013k data, 1276k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:440 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled allocated 15728640 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 2933.381 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.76 BogoMIPS (lpj=2933381) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21773 entries in 86 pages APIC routing finalized to flat. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz stepping 0a Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (11733.52 BogoMIPS). sizeof(vma)=200 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2648 bytes devtmpfs: initialized PM: Registering ACPI NVS region at bffae000 (204800 bytes) regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - e3ffffff ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xdfffffff] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] pci 0000:00:03.0: reg 10: [io 0x4f00-0x4fff] pci 0000:00:03.1: reg 10: [io 0x4900-0x493f] pci 0000:00:03.1: reg 20: [io 0x4d00-0x4d3f] pci 0000:00:03.1: reg 24: [io 0x4e00-0x4e3f] pci 0000:00:03.1: PME# supported from D3hot D3cold pci 0000:00:03.1: PME# disabled pci 0000:00:03.3: reg 10: [mem 0xfea80000-0xfeafffff] pci 0000:00:04.0: reg 10: [mem 0xfea7f000-0xfea7ffff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:04.1: reg 10: [mem 0xfea7ec00-0xfea7ecff] pci 0000:00:04.1: supports D1 D2 pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.1: PME# disabled pci 0000:00:08.0: reg 20: [io 0xffa0-0xffaf] pci 0000:00:09.0: reg 10: [mem 0xfea78000-0xfea7bfff] pci 0000:00:09.0: PME# supported from D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: reg 10: [io 0xe480-0xe487] pci 0000:00:0e.0: reg 14: [io 0xe400-0xe403] pci 0000:00:0e.0: reg 18: [io 0xe080-0xe087] pci 0000:00:0e.0: reg 1c: [io 0xe000-0xe003] pci 0000:00:0e.0: reg 20: [io 0xdc00-0xdc0f] pci 0000:00:0e.0: reg 24: [mem 0xfea7c000-0xfea7dfff] pci 0000:00:10.0: reg 10: [mem 0xfd000000-0xfdffffff] pci 0000:00:10.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:10.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit] pci 0000:00:10.0: reg 30: [mem 0xfea40000-0xfea5ffff pref] pci 0000:00:0a.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:0a.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:0a.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:0a.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:0a.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:0a.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) pci 0000:00:0a.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) pci 0000:00:0b.0: PCI bridge to [bus 02-02] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:0c.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:04:00.0: reg 10: [mem 0xfebf0000-0xfebfffff 64bit] pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:0d.0: PCI bridge to [bus 04-04] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0d.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) Firmware did not grant requested _OSC control Unable to assume _OSC PCIe control. Disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:10.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0061] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0010-0x001f] pnp 00:04: [io 0x0022-0x003f] pnp 00:04: [io 0x0044-0x004d] pnp 00:04: [io 0x0050-0x005f] pnp 00:04: [io 0x0062-0x0063] pnp 00:04: [io 0x0065-0x006f] pnp 00:04: [io 0x0072-0x007f] pnp 00:04: [io 0x0080] pnp 00:04: [io 0x0084-0x0086] pnp 00:04: [io 0x0088] pnp 00:04: [io 0x008c-0x008e] pnp 00:04: [io 0x0090-0x009f] pnp 00:04: [io 0x00a2-0x00bf] pnp 00:04: [io 0x00e0-0x00ef] pnp 00:04: [io 0x04d0-0x04d1] pnp 00:04: [io 0x0800-0x080f] pnp 00:04: [io 0x4000-0x407f] pnp 00:04: [io 0x4080-0x40ff] pnp 00:04: [io 0x4400-0x447f] pnp 00:04: [io 0x4480-0x44ff] pnp 00:04: [io 0x4800-0x487f] pnp 00:04: [io 0x4880-0x48ff] pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled] pnp 00:04: [mem 0xfed02000-0xfed03fff] pnp 00:04: [mem 0xfed04000-0xfed04fff] pnp 00:04: [mem 0xfee01000-0xfeefffff] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:05: [mem 0xfed00000-0xfed00fff] pnp 00:05: [irq 2 disabled] pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [mem 0xfec00000-0xfec00fff] pnp 00:07: [mem 0xfee00000-0xfee00fff] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0060] pnp 00:09: [io 0x0064] pnp 00:09: [irq 12] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] pnp 00:0a: [io 0x0a00-0x0a7f] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x00000000-0x0009ffff] pnp 00:0c: [mem 0x000c0000-0x000cffff] pnp 00:0c: [mem 0x000e0000-0x000fffff] pnp 00:0c: [mem 0x00100000-0xcfffffff] pnp 00:0c: [mem 0xfec00000-0xffffffff] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:04: [io 0x04d0-0x04d1] has been reserved system 00:04: [io 0x0800-0x080f] has been reserved system 00:04: [io 0x4000-0x407f] has been reserved system 00:04: [io 0x4080-0x40ff] has been reserved system 00:04: [io 0x4400-0x447f] has been reserved system 00:04: [io 0x4480-0x44ff] has been reserved system 00:04: [io 0x4800-0x487f] has been reserved system 00:04: [io 0x4880-0x48ff] has been reserved system 00:04: [mem 0xfed02000-0xfed03fff] has been reserved system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0a: [io 0x0a00-0x0a7f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:0a.0: PCI bridge to [bus 01-01] pci 0000:00:0a.0: PCI bridge to [bus 01-01] pci 0000:00:0a.0: bridge window [io disabled] pci 0000:00:0a.0: bridge window [mem disabled] pci 0000:00:0a.0: bridge window [mem pref disabled] pci 0000:00:0b.0: PCI bridge to [bus 02-02] pci 0000:00:0b.0: PCI bridge to [bus 02-02] pci 0000:00:0b.0: bridge window [io disabled] pci 0000:00:0b.0: bridge window [mem disabled] pci 0000:00:0b.0: bridge window [mem pref disabled] pci 0000:00:0c.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: bridge window [io disabled] pci 0000:00:0c.0: bridge window [mem disabled] pci 0000:00:0c.0: bridge window [mem pref disabled] pci 0000:00:0d.0: PCI bridge to [bus 04-04] pci 0000:00:0d.0: PCI bridge to [bus 04-04] pci 0000:00:0d.0: bridge window [io disabled] pci 0000:00:0d.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:0d.0: bridge window [mem pref disabled] pci 0000:00:0a.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 pci 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:04.0: PCI INT A disabled ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 pci 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:04.1: PCI INT B disabled pci 0000:00:10.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 16718k freed audit: initializing netlink socket (disabled) type=2000 audit(1395556977.393:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7149 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 46712A08B7477BD - User ID: CentOS (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:0b.0: setting latency timer to 64 alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X pcieport 0000:00:0c.0: setting latency timer to 64 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X pcieport 0000:00:0d.0: setting latency timer to 64 alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 intel_idle: MWAIT substates: 0x22220 intel_idle: does not run on family 6 model 23 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ACPI: SSDT 00000000bffae0c0 002FB (v01 DpgPmm P001Ist 00000011 INTL 20051117) ACPI: SSDT 00000000bffae3c0 002FB (v01 DpgPmm P002Ist 00000012 INTL 20051117) ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386) GHES: HEST is not enabled! Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:04.1: setting latency timer to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:04.1: debug port 1 ehci_hcd 0000:00:04.1: cache line size of 64 is not supported ehci_hcd 0000:00:04.1: irq 22, io mem 0xfea7ec00 ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:04.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 ohci_hcd 0000:00:04.0: setting latency timer to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:04.0: irq 23, io mem 0xfea7f000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 ohci_hcd usb usb2: SerialNumber: 0000:00:04.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 PNP: PS/2 controller doesn't have KBD irq; using default 1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver GRE over IPv4 demultiplexor driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:06: setting system clock to 2014-03-23 06:42:57 UTC (1395556977) Initalizing network drop monitor service Freeing unused kernel memory: 1276k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 800k freed Freeing unused kernel memory: 1584k freed dracut: dracut-004-336.el6_5.2 dracut: rd_NO_LUKS: removing cryptoluks activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com udev: starting version 147 ACPI: WMI: Mapper loaded [drm] Initialized drm 1.1.0 20060810 nouveau 0000:00:10.0: setting latency timer to 64 ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 nouveau 0000:00:10.0: PCI INT A -> Link[SGRU] -> GSI 21 (level, low) -> IRQ 21 nouveau [ DEVICE][0000:00:10.0] BOOT0 : 0x063000a2 nouveau [ DEVICE][0000:00:10.0] Chipset: C73 (NV63) nouveau [ DEVICE][0000:00:10.0] Family : NV40 nouveau [ VBIOS][0000:00:10.0] checking PRAMIN for image... nouveau [ VBIOS][0000:00:10.0] ... appears to be valid nouveau [ VBIOS][0000:00:10.0] using image from PRAMIN nouveau [ VBIOS][0000:00:10.0] BIT signature found nouveau [ VBIOS][0000:00:10.0] version xxx.xxx.xxx.xxx.01 nouveau [ PFB][0000:00:10.0] RAM type: unknown nouveau [ PFB][0000:00:10.0] RAM size: 256 MiB nouveau [ PFB][0000:00:10.0] ZCOMP: 0 tags nouveau [ PTHERM][0000:00:10.0] FAN control: none / external nouveau [ PTHERM][0000:00:10.0] fan management: disabled nouveau [ PTHERM][0000:00:10.0] internal sensor: no nouveau [ PTHERM][0000:00:10.0] programmed thresholds [ 90(2), 95(3), 145(2), 135(5) ] [TTM] Zone kernel: Available graphics memory: 1832040 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator nouveau [ DRM] VRAM: 253 MiB nouveau [ DRM] GART: 512 MiB nouveau [ DRM] TMDS table version 1.1 nouveau W[ DRM] TMDS table script pointers not stubbed nouveau [ DRM] DCB version 3.0 nouveau [ DRM] DCB outp 00: 01000310 00000023 nouveau [ DRM] DCB outp 01: 01031322 00000080 nouveau [ DRM] DCB conn 00: 0000 nouveau [ DRM] DCB conn 01: 1161 nouveau E[ DRM] Pointer to flat panel table invalid Slow work thread pool: Starting up Slow work thread pool: Ready nouveau [ DRM] Saving VGA fonts [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. nouveau [ DRM] 0xC2E8: Parsing digital output script table nouveau [ DRM] 1 available performance level(s) nouveau [ DRM] 0: core 600MHz shader 600MHz fanspeed 100% nouveau [ DRM] c: core 24MHz nouveau [ DRM] MM: using M2MF for buffer copies nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff880129705c00 fbcon: nouveaufb (fb0) is primary device Console: switching to colour frame buffer device 160x64 nouveau 0000:00:10.0: fb0: nouveaufb frame buffer device nouveau 0000:00:10.0: registered panic notifier [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:10.0 on minor 0 usb 2-1: new low speed USB device number 2 using ohci_hcd dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation pata_amd 0000:00:08.0: version 0.4.1 pata_amd 0000:00:08.0: setting latency timer to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 usb 2-1: New USB device found, idVendor=0566, idProduct=3029 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice input: HID 0566:3029 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input3 generic-usb 0003:0566:3029.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0566:3029] on usb-0000:00:04.0-1/input0 input: HID 0566:3029 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input4 generic-usb 0003:0566:3029.0002: input,hidraw1: USB HID v1.11 Device [HID 0566:3029] on usb-0000:00:04.0-1/input1 ata2: port disabled. ignoring. ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20 alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 pata_acpi 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20 pata_acpi 0000:00:0e.0: setting latency timer to 64 pata_acpi 0000:00:0e.0: PCI INT A disabled ahci 0000:00:0e.0: version 3.0 ahci 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20 alloc irq_desc for 27 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:0e.0: irq 27 for MSI/MSI-X ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pmp pio ahci 0000:00:0e.0: setting latency timer to 64 scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27 ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27 ata5: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c200 irq 27 ata6: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c280 irq 27 Refined TSC clocksource calibration: 2933.333 MHz. Switching to clocksource tsc ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATAPI: HL-DT-ST DVDRAM_GH10N, NN07, max UDMA/100 ata4.00: configured for UDMA/100 ata3.00: ATA-8: WDC WD5001ABYS-01YNA0, 59.01D01, max UDMA/133 ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA WDC WD5001ABYS-0 59.0 PQ: 0 ANSI: 5 scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM_GH10N NN07 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 dracut: Scanning devices sda2 for LVM logical volumes vg_chiho/lv_root vg_chiho/lv_swap dracut: inactive '/dev/vg_chiho/lv_root' [50.00 GiB] inherit dracut: inactive '/dev/vg_chiho/lv_home' [411.64 GiB] inherit dracut: inactive '/dev/vg_chiho/lv_swap' [3.62 GiB] inherit EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/mapper/vg_chiho-lv_root SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1395556979.969:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root udev: starting version 147 i2c i2c-4: nForce2 SMBus adapter at 0x4d00 ACPI: resource nForce2_smbus [io 0x4e00-0x4e3f] conflicts with ACPI region SMRG [io 0x4e00-0x4e3f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver nForce2_smbus 0000:00:03.1: Error probing SMB2. snd_hda_intel 0000:00:09.0: power state changed by ACPI to D0 snd_hda_intel 0000:00:09.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23 snd_hda_intel 0000:00:09.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23 hda_intel: Disabling MSI snd_hda_intel 0000:00:09.0: setting latency timer to 64 input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:09.0/sound/card0/input5 input: HDA NVidia Line as /devices/pci0000:00/0000:00:09.0/sound/card0/input6 input: HDA NVidia Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input7 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered tg3.c:v3.132 (May 21, 2013) ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 tg3 0000:04:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 tg3 0000:04:00.0: setting latency timer to 64 tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address xx:xx:xx:xx:xx:xx tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] sd 2:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:0:0: Attached scsi generic sg1 type 5 microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07 platform microcode: firmware: requesting intel-ucode/06-17-0a microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07 platform microcode: firmware: requesting intel-ucode/06-17-0a Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: Adding 3801080k swap on /dev/mapper/vg_chiho-lv_swap. Priority:-1 extents:1 across:3801080k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team alloc irq_desc for 28 on node -1 alloc kstat_irqs on node -1 tg3 0000:04:00.0: irq 28 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present